driver seat adjustment Peugeot 301 2017 Owner's Manual

7
Driver's seat (continued)
1
Headlight beam height adjustment
6
7
2
Deactivation of the DSC/ASR system
7
8
Stop & Start

1
16 -118
Opening the boot lid

4
3
Alarm

3
9- 40
3
Adjustment of the door mirrors
5
0 -51
4
Steering wheel adjustment
5
0
5
Lighting control
6
4-66
Direction indicators

7
1
6
Instrument panel
1
1
Warning and indicator lights

1
2-24
Service indicator

2
5-26
Gear shift indicator

1
15
Distance recorders

3
0
7
Wiper control stalk
6
8
Trip computer

3
3 -35
8
H o r n
71
9
Speed limiter
1
19-121
Cr uise c ontrol

12
2-124
.
Over view

46
Front seats
As a safety measure, adjustments to the driver's seat must only be done when stationary.
Forwards-backwards
F Raise the control and slide the seat forwards or backwards.
Before moving the seat backwards, ensure that there is nothing that might prevent the full
travel of the seat.
There is a risk of trapping or pinching passengers if present in the rear seats or jamming the
seat if large objects are placed on the floor behind the seat.
Tilting the backrest
F Press the control backwards.
Height (driver only)
F Pull the control upwards to raise or push it downwards to lower, as many times as
necessary, to obtain the position required.
Ease of use and comfort

67
Headlight beam height adjustment
To avoid causing a nuisance to other road
users, the height of the headlight beams should
be adjusted according to the load in the vehicle.
Depending on the version, this adjustment can
be carried out using the control located:
-
U
nder the bonnet.
-

T
o the left of the steering wheel
Bonnet
F Raise the bonnet to access the control (one per headlight).
F

T
urn the control to adjust the height of the
headlight beam.
To the left of the steering wheel
0 1 or 2 people in the front seats.
- 5 people.
1 5 people + maximum authorised load in
the boot.
- Driver on his own + maximum authorised
load in the boot.
The higher number positions can be used, but
may limit the area illuminated by the headlights.
The initial setting is position "0". Travelling abroad
The design of the dipped beam headlights
allows, without modification, driving in a
country that drives on the other side of the
road to the country in which your vehicle
was sold.
4
Lighting and visibility