start stop button Peugeot 301 2017 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2017, Model line: 301, Model: Peugeot 301 2017Pages: 306, PDF Size: 9.87 MB
Page 36 of 306

34
Touch screen
The information is accessible in the "Driving" 
menu.
Display of information in the 
touch screen
Permanent display:
F  Sel ect the " Applications " menu, then " Tr i p  
computer ". The current fuel consumption tab with:
-
 
Range.
-  
T
 he current instantaneous fuel 
consumption.
-  
T
 he Stop & Start time counter,
The trip " 1" tab with:
-
 D
istance travelled.
-
 A
verage fuel consumption.
-
 
A
 verage speed for the first trip.
The trip " 2" tab with:
-
 D
istance travelled.
-
 A
verage fuel consumption.
-
 
A
 verage speed for the second trip.
Reset trip
The information of the trip computer isdisplayed 
in tabs.
F 
P
 ress one of the buttons to display the 
desired tab.
Temporary display in a new window:
F
 
P
 ress the end of the wiper control lever for 
access to the information and display the 
different tabs. F
 
W
 hen the desired trip is displayed, press 
the reset button or on the end of the wiper 
control lever.
Tr i p s  " 1" and " 2" are independent and are used 
identically.
Tr i p  " 1" allows daily calculations to be carried 
out, for example, and trip " 2" allows monthly 
calculations. 
Instruments  
Page 40 of 306

38
Lost keys
Go to a PEUGEOT dealer with the vehicle's 
registration document, your personal 
identification documents and if possible the 
key code label.
The PEUGEOT  dealer will be able to look 
up the key code and the transponder code 
required to order a new key.
Remote control
The high frequency remote control is a 
sensitive system; do not operate it while it is 
in your pocket as there is a possibility that 
it may unlock the vehicle, without you being 
aware of it.
Do not repeatedly press the buttons of 
your remote control out of range and out 
of sight of your vehicle. You risk making 
it inoperative. It will then be necessary to 
reinitialise it again.
No remote control can operate when the 
key is in the ignition switch, even when 
the ignition is switched off, except for 
reinitialisation. Stopped vehicle
Driving with the doors locked may render 
access by the emergency services to the 
interior difficult in an emergency.
As a safety precaution, never leave children 
alone in the vehicle, except for a very short 
period.
In all cases, it is essential to remove the key 
from the ignition switch when leaving the 
vehicle.
Anti-theft protection
Do not make any modifications to the 
electronic engine immobiliser system; this 
could cause malfunctions.
Second-hand vehicle
Have the pairing of all of the keys in your 
possession checked by a PEUGEOT
 dealer, 
to ensure that only your keys can be used to 
open and start the vehicle. Do not throw the remote control 
batteries away, they contain metals 
which are harmful to the environment.
Take them to an approved collection 
point. 
Access  
Page 107 of 306

105
Parking brake
LockingUnlocking
F Pull the parking brake lever up slightly, 
press the release button, then lower the 
lever fully.
When parking on a slope, direct your 
wheels against the kerb, apply the parking 
brake, engage a gear and switch off the 
ignition. When the vehicle is being driven, 
if this warning light and the STOP
 
warning light come on, accompanied 
by an audible signal and a message 
in the screen, this indicates that the 
parking brake is still on or has not 
been fully released.
Manual gearbox
Engaging reverse gear
F Press the clutch pedal fully down.
F
 
P
 ush the gear lever fully to the right then 
backwards.
F
 
P
ull the parking brake lever up to 
immobilise your vehicle.
As a safety precaution and to facilitate 
starting of the engine:
-
 
a
 lways select neutral,
-
 
p
 ress the clutch pedal.
Only engage reverse gear when the vehicle 
is stationary with the engine at idle.
6 
Driving  
Page 120 of 306

118
With button
Press this button to deactivate the system.
Deactivation is confirmed by the illumination of 
the indicator light of the button and the display 
of a message.
Pressing the button again reactivates the 
system.
The indicator light of the button goes off, 
accompanied by the display of a message.
With the touch screen
Press MENU.
In the Driving / Vehicle  menu, activate/
deactivate " Stop and Star t System ".
Opening the bonnet
Driving on flooded roads
Before driving through a flooded road, it is 
strongly recommended that you deactivate 
the Stop & Start.
For more information on Driving advice , 
particularly on flooded roads, refer to the 
corresponding section. Before doing anything under the bonnet, 
deactivate the Stop & Start system to 
avoid the risk of injury related to an 
automatic change to START mode.
Malfunction
In the event of a fault in the system, 
the indicator light in the "ECO OFF" 
button flashes for a moment, then 
illuminates continuously.
Have them checked by a PEUGEOT  dealer or a 
qualified workshop.
In the event of a fault in STOP mode, the 
vehicle may stall. All of the instrument panel 
warning lights come on. It is then necessary to 
switch the ignition off and to restart the engine 
using the key.
The Stop & Start system requires a 12 V  
battery of specific technology and 
specification.
All work on this type of battery must be 
carried out only by a PEUGEOT  dealer or 
a qualified workshop.
For more information on the 12 V batter y , 
refer to the corresponding section. 
Driving  
Page 240 of 306

8
Voice commandsHelp messages
Navigate home To start guidance or add a stopover, say 
"navigate to" and then the address or contact 
name. For example, "navigate to address  
11 Regent Street, London" or "navigate to 
contact, John Miller". You can also specify if it's 
a preferred or recent destination. For example, 
say "navigate to recent destination, 11 Regent 
Street, London", or "navigate to preferred 
destination, tennis club", or even "navigate 
home". To display the points of interest on a 
map, you can say "show hotels in Banbury" 
or "show nearby petrol stations". For more 
information, say "help with route guidance"
Navigate to work
Navigate to preferred address <...>
Navigate to contact <...>
Navigate to address <...>
Show nearby POI <...>
Remaining distance
To get information about your current route, 
say "remaining time", "remaining distance" or 
"arrival time". To know the other commands 
that can be used, say "help with navigation".
Remaining time
Arrival time
Stop route guidance
Depending on the country, give the 
destination instructions (address) in the 
language used by the system."Radio Media" voice 
commands
These commands can be made from any 
screen page after pressing the " Voice 
command" or "Telephone" button located 
on the steering wheel, as long as there is 
no telephone call in progress. 
PEUGEOT Connect Nav