ESP Peugeot 307 Break 2002.5 Owner's Manual

ELECTRIC WINDOWS
1 Driver's electric window
2 Passenger's electric window.
3 Rear right electric window.
4 Rear left electric window.
5 Disarming the rear window switches.
Safety autoreverse:When the window is rising and meets an
obstacle, it stops and lowers again.
ELECTRIC MIRRORS STEERING WHEEL
HEIGHT AND DEPTH
ADJUSTMENT ➜
When stationary, pull handle
Ato unlock the steering wheel.
➜ Adjust the height and depth of
the steering wheel.
➜ Lock it by pushing handle Ain
fully.
Manual mode: ➜ Press or pull the switch lightly.
The window stops as soon as
the switch is released. Automatic mode: ➜
Press or pull the switch firmly.
One touch completely opens
or closes the window.
➜ Move switch 6to the right or
left to select the corresponding
mirror.
➜ Then move button 7in all four
directions to adjust.
➜ Move switch 6back to the
centre position. When the vehicle is parked, the
mirrors can be folded back man
ually, electrically by
pulling switch
6rear
wards or automatically
when locking the vehicle.
09-09-2002
11 3
11 411 6
9YOUR 307 AT A GLANCE

REAR PARKING AID
(ESTATE)
This system, installed in the rear
bumper, detects any obstacle
(person, vehicle, tree, barrier,
kerb...) situated behind the vehi
cle.
Activation
With the engine running, the sys
tem is activated when reverse
gear is engaged. A bleep indi
cates that it is active.
The proximity information is given
by an audible signal, consisting of
bleeps which become faster as
the vehicle approaches the
obstacle.
When the distance between the
rear of the vehicle and the obsta
cle is less than approxi
mately twentyfive cen
timetres, the audible sig
nal becomes continuous.
When you switch to neu
tral, the system becomes
inactive again.
Storing a speed
When you reach the required
speed, press button
2or 3. The
speed is stored and will be main
tained automatically.
Note: it is possible to accelerate
temporarily without deactivating
the cruise control.
Deactivating the stored speed
If you wish to deactivate the
stored speed:  press button 4or the brake or
clutch pedal.
Recalling the stored speed
Following deactivation, press but
ton 4. Your vehicle will return to
the last speed stored.
Cancelling the stored speed  Place knob 1in the OFFposi
tion or switch off the ignition.
Do not use the
cruise control on
slippery roads or
in heavy traffic.
09-09-2002
131130
10YOUR 307 AT A GLANCE
CRUISE CONTROL
The cruise control makes it possi
ble to maintain, at a constant rate,
the vehicle speed programmed by
the driver, irrespective of the pro
file of the road and without any
action on accelerator or brake
pedal.
To be stored, the vehicle speed
must be in excess of approxi
mately 25 mph.
Activation Place knob 1in the ON
position.
You may store a speed.  Place knob 1in the OFFposi
tion to deactivate the system.

1st service at 6,000 miles
(10 000 km) or 6 months*.
This is necessary in order to benefit from the warranty.
MILES (KM) 20,000 (30 000) 40,000 (60 000) 60,000 (90 000) 80,000 (12 0 000) 100,000 (150 000) 120,000 (180 000)
09-09-2002
THE SERVICE LEVELS
Each vehicle has its own servicing cycle, based upon the engine type.
This cycle consists of alternating 2 types of service, A and C, int ermediate visits and a few additional operations specific to
your vehicle; these correspond to key stages in the life of your 3 07.
At your first and each subsequent service, your dealer will advise you of the type and content of the next service
due.
PEUGEOT SERVICING
22
MAINTENANCE CYCLE FOR YOUR 307 PETROL ENGINE
Service every 2 years or 20,000 miles (30 000 km) maxi mum
These fixed operations are carried out with synthetically based oil.
Synthetic oil or Fuel economy oil may also be used.
Arduous conditions of use (see corresponding section).
* Whichever comes first. Intermediate visit.

09-09-2002
60,000 (100 000) 72,000 (120 000) 84,000 (140 000) 96,000 (160 000) 108,000 (180 000)
MILES (KM) 12,000 (20 000) 24,000 (40 000) 36,000 (60 000) 48,0
00 (80 000)
PEUGEOT SERVICING23
MAINTENANCE CYCLE FOR YOUR 307 DIESEL
Service every 2 years or 12,000 miles (20 000 km) maxi mum
1st service at 6,000 miles
(10 000 km) or 6 months*. This is necessary in order to benefit from the warranty.
+ maintenance of particulate
emission filter
2.0 l HDI 110 bhp + maintenance of
particulate
emission filter
2,0 l HDI 110 bhp
These fixed operations are carried out :
with synthetically based oil, synthetic oil or Fuel Economy oil .
with 5W40 oil for HDI Turbo Diesel engines fitted with aparticulate emission filter.
Arduous conditions of use (see corresponding section).
*Whichever comes first. Intermediate visit.

09-09-2002
1 Rev counter.
2 Seat belt not fastened warning
light.
3 Engine diagnostics warning
light.
4 Handbrake and low brake fluid
level warning light.
5 Lefthand direction indicator.
6 Coolant temperature indicator. 7
Battery charge warning light.
8 Central (STOP) warning light.
9 Engine oil pressure warning
light.
10 Low fuel level warning light.
11 Righthand direction indicator.
12 Fuel gauge.
13 ABS warning light. 14
Air bag warning light.indicator
light.
16 Speedometer.
17 Service indicator, oil level and
total distance recorder.
18 Trip recorder zero reset.
19 Rear fog lamp indicator light.
20 ESP/ASR warning light
21 Front fog lamps indicator
light.
22 Diesel engine preheating light.
23 Main beam headlamps
indicator light.
24 Low coolant level warning light.
25 Dipped beam headlamps
indicator light.
26 Water in diesel filter warning
light.
27 Lighting rheostat.
INSTRUMENTS AND CONTROLS
28
PETROL / DIESEL INSTRUMENT PANEL DIALS: MANUAL GEARBOX

09-09-2002
INSTRUMENTS AND CONTROLS29
1
Rev counter.
2 Seat belt not fastened warning
light.
3 Engine diagnostics warning
light.
4 Handbrake and low brake fluid
level warning light.
5 Lefthand direction indicator.
6 Coolant temperature indicator. 7
Battery charge warning light.
8 Central (STOP) warning light.
9 Engine oil pressure warning
light.
10 Low fuel level warning light.
11 Righthand direction indicator.
12 Fuel gauge.
13 ABS warning light. 14
Air bag warning light.
15 Passenger air bag disarming
indicator light.
16 Speedometer.
17 Service indicator, oil level and
total distance recorder.
18 Trip recorder zero reset.
19 Rear fog lamp indicator
light.
20 ESP/ASR warning light
21 Front fog lamps indicator light.
22 Main beam headlamps indicator
light.
23 Low coolant level warning light.
24 Dipped beam headlamps
indicator light.
25 Lighting rheostat.
26 Sport programme indicator light.
27 Snow programme indicator
light.
28 Gear lever position indicator.
PETROL INSTRUMENT PANEL DIALS: AUTOMATIC GEARBOX

09-09-2002
Battery charge
warning light
This comes on each time
the ignition is switched on.
If it comes on with the engine run
ning, it is accompanied by an audible
signal and a message "Low battery
charge" on the multifunction
display.
It can indicate:
faulty operation of the charging circuit,
loose battery or starter terminals,
a cut or slack alternator belt,
an alternator fault.
Contact a PEUGEOT dealer.
ABS warning light
This light comes on for
3 seconds each time the
ignition is switched on.
If it remains on or comes on above
8mph (12 kmh), this indicates a mal
function of the ABS.
However, the vehicle retains conven
tional servoassisted braking.
Illumination of this light is accompa
nied by an audible signal and the
message ''ABS system problem''
on the multifunction display.
Contact a PEUGEOT dealer. Electronic stability programme (ESP/ASR) warning light
This comes on for 3 seconds each time the ignition is switched o
n.
If the light remains on or comes on when the engine is runni ng and the
vehicle is moving, it is accompanied by an audible signal and the mes
sage ''ESP/ASR system not operational'' on the multifunction display; contact
a PEUGEOT dealer.
Diesel preheat light
This comes on each time the ignition is switched on
Wait until it goes out before trying the starter.
Water in diesel filter warning light
(according to country)
Illumination on of this warning light is accompanied by an audible signal
and the message ''Water in diesel filter'' on the multifunction display.
There is a risk of damage to the injection system.
Contact a PEUGEOT dealer a soon as possible. .
Engine diagnostics warning light
This comes on each time the ignition is switched on.
The warning light showing clogging of the particulate emi
ssion filter is
linked to the engine diagnostics warning light.
If it comes on with the engine running, accompanied by an a udible signal and the
message ''Emission control system problem'' on the multifunction display, it
indicates a malfunction in the emission control system. ''Diesel additive low level'' or "Risk of clogging of particulate emission
filter" indicates a malfunction in the particulate emission filter.
If it flashes when the engine is running, accompanied by an audible signal and
the message ''Catalytic converter faulty'' on the multifunction display, it indi
cates a malfunction in the injection or ignition system. There is a risk of damage
to the catalytic converter (petrol engines only).
Contact a PEUGEOT dealer as soon as possible.
INSTRUMENTS AND CONTROLS 31

09-09-2002
Instrument panel display
After switching on the ignition, three functions are shown in succession:
service indicator (see corresponding section),
engine oil level indicator,
total distance recorder (total and trip distances).
Note : the total and trip distances are displayed for 30 seconds wh en the ignition
is switched off, on opening the driver's door, as well as on locking and unlocking
the vehicle.
Engine oil level indicator
When the ignition is switched on, the engine oil level is indicated for approxi
mately 10 seconds, after the servicing information.
Maximum
Check the level using the dipstick to confirm whether the displ ay
is correct; a surplus of oil can cause damage to the engine.
Contact a PEUGEOT dealer without delay.
Minimum
Check the level with the dipstick and top it up. The figu re shown
is only correct if the vehicle has been on stable, level ground , with
the engine stopped, for 10 minutes.
Oil level gauge fault
Flashing of the segments, the square or of "min" and "max" indi
cates a fault in the oil level gauge.
There is a risk the engine will be damaged.
Contact a PEUGEOT dealer. Lighting rheostat
With the lights on,
press the button to
vary the intensity of
the lighting of the
instrument panel and
the multifunction dis
play. When the light
ing reaches the minimum (or maxi
mum) setting, release the button
then press it again to increase (or
reduce) the brightness.
As soon as the lighting is of the
required brightness, release the but
ton.
Trip recorder zero
reset
With the ignition on,
press the button.
INSTRUMENTS AND CONTROLS
34

09-09-2002
YOUR 307 IN DETAIL 35
MULTI–FUNCTION
SCREENS
Presentation
Monochrome screen B
This enables the following informa
tion to be displayed:
the time,
the date,
the outside temperature (the
°C
symbol flashes when there is a risk
of ice),
the radio displays,
the status of the openings (doors,
bonnet...),
the warning (e.g. “Battery charge
fault”) or information (e.g.
“Passenger air bag disarmed”)
messages displayed temporarily
can be cleared by pressing button
1 or 2,
the trip computer (see correspond
ing section).
Monochrome screen CT and
colour screen DT
These two systems are controlled by
the RT3 audio/telephone keypad.
They enable the following informa
tion to be displayed:
–the time,–the date,–the outside temperature (a mes
sage warns you when there is a
risk of ice),
–the audio source displays (radio,
CD, ...),
–the telematic system displays (tele
phone, services, ...),
–the status of the openings (doors,
bonnet, ...),
–the warning (e.g. “Fuel level low”)
and vehicle functions status (e.g.
“Passenger air bag disarmed”)
messages displayed temporarily,
–the trip computer display (see cor
responding section),
–the satellite navigation system dis plays (see corresponding section).
Note: to enable you to use all of your
system’s functions, you have two
CD ROMs: one, “Configuration”, con
tains the software and the various
display and spoken information lan
guages, the other, “Navigation”, con
tains the satellite navigation system
map data. Monochrome screen CT
General menu
Press the
“MENU” button to access
the general menu and select one of
the following applications:–navigation guidance (see section
“Satellite navigation system”),
–trip computer (see corresponding section),
–directory (see “RT3 audio/telephone” section),
–telematics (see “RT3 audio/telephone” section),
–configuration (see correspondingsection).

YOUR 307 IN DETAIL
36
Parameter configuration
Monochrome screen B
Press button
1for two seconds to
gain access to the settings .
Then, each press of this button per
mits scrolling of the various parame
ters.
language of the information dis played,
speed unit (km or miles),
temperature unit (degrees Celcius or Fahrenheit),
time format (12 or 24 hours),
hour,
minute,
year,
month,
day.
Pressing button 2enables you to
change the parameter selected.
Continue pressing the button for
rapid scrolling.
After ten seconds without action, the
screen returns to the usual display,
the modified data are recorded.configuration (see corresponding
section).
map (see section “Satellite naviga
tion system”)
A few definitions
Superimposed display:
a window appears over the current
application for a short while, to
announce a change of status of
another application.
Permanent application:
main application currently in use, dis
played in the main screen window.
Contextual menu:
limited menu associated with the
main application currently in use, dis
played in the main screen window.
Colour screen DT
General menu
Press the
“MENU” button to access
the general menu and select one of
the following applications:
navigation guidance (see section
“Satellite navigation system”),
trip computer (see corresponding
section),
directory (see “RT3 audio/tele
phone” section),
telematics (see “RT3 audio/tele
phone” section),
09-09-2002