tow Peugeot 307 Break 2002.5 Owner's Manual

WINDSCREEN WIPERS
Front 2 Rapid wipe
(heavy rain).
1 Normal wipe
(moderate rain).
AUTO Automatic wipe.
0 Off.
Single wipe.
Windscreen wash: pull the stalk
towards you.
Automatic wipe
In the AUTOposition,
the wiper operates auto
matically and adjusts
its speed to the inten
sity of the rainfall .
Rear
Off Intermittent Windscreen wipe wash
STEERING WHEEL
STALKS
LIGHTS
Front and rear lights (ring A)
Lights off.
Side lights.
Dipped / Main
beam headlamps.
Automatic switch
ing on of lights.
Automatic switching on of lights
To activate or deactivate the
function, place the key in the
accessories position, with the
lights stalk in position 0and
press the end of the stalk for
more than two seconds. Vehicles fitted with a rear fog
lamp (ring B)
Rear fog lamp (rotation
of the ring forwards).
Vehicles fitted with front fog
lamps and a rear fog lamp
(ring C) Front fog lamps (first
rotation of the ring for
wards)Front fog lamps and
rear fog lamp
(second rotation of
the ring forwards)
To switch off: rotate the
push ring rearwards.
09-09-2002
106
108
5YOUR 307 AT A GLANCE

Moving Off
With the engine running, to move
off from position P:
➜ It is essential to press the
brake pedal to exit position P,
➜ Select the required function(R ,D or M) then gradually
release the pressure on the
brake pedal; the vehicle will
move off immediately.
You can also move off from posi
tion N:
➜ Release the handbrake, with
your foot on the brake.
➜ Select the required function ( R,
D or M) then gradually release
the pressure on the brake
pedal; the vehicle will move off
immediately.
When the engine is idling
with the brakes not
applied, if function R, D or
M is selected, the vehicle
moves without the accel
erator being pressed.
For this reason, do not
leave children unsuper
vised inside the vehi
cle, with the engine
running.
126
1212YOUR 307 AT A GLANCE
AUTOMATIC GEARBOX
'PORSCHE TIPTRONIC SYSTEM'
The four speed automatic gearbox offers a choice between the comfort of
automatic integral regulation enhanced by a sportand snow pro
gramme, or the pleasure of manual gear changing.
Gear selection gate ➜ Move the lever in the gate to select one of the functions.
Once the function is selected, the indicator light for that function illumi
nates on the instrument panel display.
S: sport programme.


: snow programme.
Park: forparking or forstarting the
engine, with the handbrake on or off.
Reverse: to reverse ; select this function with
the vehicle stationary and the engine at idle.
Neutral: for starting the engine or for parking ,
with the handbrake on.
Note: if function Nis engaged by mistake while
the car is moving, allow the engine to return to
idling speed before engaging function Dto accel
erate.
D rive: for automatic gear changing.
Manual: for manual gear changing.
To change the four gears manually:
➜ Push the lever to the +symbol to change up to the next gear and pull
the lever towards the –symbol to change down to the next gear.
Note: the Ssport and snow programmes do not operate in manual mode.
09-09-2002

09-09-2002
Arduous conditions of use
• Continuous doortodoor use.
• Town use (e.g. taxi).
• Repeated short journeys, with the engine cold at low te mperatures.
• A prolonged stay under the following conditions: – countries with temperatures often above +30 °C,
– countries with temperatures often below –15 °C,
– countries with a dusty atmosphere,
– countries whose lubricants or fuels do not conform to our recommen dations.
Recommendations:
– replace the air filterevery 24,000 miles (40 000 km) for petrol engines and every 27,000 miles (45 000 km) for diesel
engines,
– for replacement of the timing belt: contact a PEUGEOT dealer.
PEUGEOT SERVICING
24

09-09-2002
YOUR 307 IN DETAIL75
The main "Navigation Guidance"
menu offers various options for acti
vation or management of guidance:
– choice of the type of destination address (entering of address, ser
vice, GPS coordinates, stored
address),
– modification to the initial route (entering of a diversion)
– displaying of the details of the itin erary (displaying of the chosen
destination)
– management of the guidance options (setting of the guidance
tool parameters),
– stop or resume guidance (display ing of the message which changes
depending on the previous status).
Navigation Guidance
The
"Select a destination" menu
offers various options for reaching a
destination:
– entering a postal address,
– selecting a service available in a town (town hall, hotel, cinema,
airport...),
– entering GPS details,
– selecting a destination stored in the directory,
– selecting one of the last ten desti nations.
Selecting a destinationThe last guidance address is dis
played.
Select and validate in succession the
entry zones
"Town","Street" , then
"N" to fill them in.
The "OK" function permits validation
of the address and access to the
guidance activation function.
The "Archive" function permits
recording of the address in a directo
ry file.
The "Current location" function
permits display of the current
address.
Entering an address

09-09-2002
YOUR 307 IN DETAIL
76
Entering the first letter of the name of
the town required will erase that of
the town displayed.
To enter the name of another town,
select each letter by turning the dial,
then validate each letter by pressing
the dial.
If an error is made entering the let
ters, the "Correct" function permits
erasing of the last letter entered.
Note: following the validation of a let
ter, only those which could make up
a name existing in the database
appear.
As letters are entered, the "List"
function indicates the number of
towns beginning with the same let
ters. Activation of this function per
mits selection of a town from the list. When the list contains fewer than
five names, these are displayed
automatically. Select a town then val
idate by pressing the dial.
When the complete name of the
town is displayed, select the
"OK"
function then confirm by pressing the
dial.
Note: once the town has been
entered, you can confirm by pressing
"OK" . You will then be guided to the
centre of this town automatically.
Entering the name of the street
Enter the name of the street in the
same way as the name of the town.
When the full name of the street is
displayed, select the "OK"function
then confirm by pressing the dial.
Entering the name of the town
Enter the number of the street previ
ously entered.
Select the
"OK"function, then con
firm by pressing the dial.
Note: if the number of the street
entered is not available, it is rejected.
You can also select a street from the
"Junctions" function, which avoids
having to enter the street number.
Note: if the street selected does not
have a number, the list of junctions is
displayed automatically.
The full destination is displayed.
Select the "OK" function, then
confirm by pressing the dial to
access the guidance activation
function.
Follow the instructions given by
the system.
Entering the number of the street
or junction

YOUR 307 IN DETAIL77
The most recent destinations are
shown.
There are three possible methods of
defining the location to which you
wish to travel:
accept the last details input by means of the "OK"function,
input the details of your destina tion,
automatically input the details of your current location by means of
the "Current location" function.
GPS details
The last address entered is displayed.
There are three options for defining
the location in which you wish to
obtain this service:
accept the last address entered
using the "OK"function,
fill in the "Town" and "Street"
zones,
automatically enter the name of your current location using the
"Current location" function.
Selecting a service.
If you wish to be directed to a ser
vice, select the
categorycorre
sponding to the service , then confirm
by pressing the dial.
The list of services corresponding to
the category selected is displayed.
Select the servicethen confirm by
pressing the dial to access the
"Place choice" function.
An indication on the edge of the
screen (x/n) shows you the maxi
mum number of establishments pro
viding the same service within a
radius of 30 miles (50 km), as the
crow flies, from the selected location.
Use buttons "<"and ">"to consult
the list provided.
When the establishment of your
choice is displayed, you can:
selelct the "OK"function to acti
vate guidance towards this service,
se lect the "Archive" function to enter
this establishment in your directory.
Note:
if the service selected is not
available in the programmed loca
tion, a temporary message informs
you of this.
Following validation of the location,
the service closest to it is displayed.
The distance indicated is the dis
tance as the crow flies from the ser
vice to the selected location.
09-09-2002

The contextual menu associated with
the "Navigation Guidance" applica
tion appears as a superimposed dis
play, when this is the application cur
rently in use in the main screen window.
This menu is limited to the following
functions:
changing of the initial route (enter ing of a diversion),
switching to "Selection Movement on map" mode*,
storing of the current location (postal address if available or, if it
is not, the GPS coordinates),
changing of the route calculation criteria,
stopping or resuming of guidance (displaying of the message which
changes depending on the previ
ous status).
General notes on the "Map" appli
cation*
The map guidance can be displayed
in two ways:
full screen map,
reduced size map on the righthand side and zoom image of the
junction on the lefthand side.
To switch from one to the other,
press the dial for more than two sec
onds.
To switch from one to the other,
press the knob for more than two
seconds.
The "Map" application has two oper
ating modes: "Selection Movement on
map"** mode,
"Vehicle following on map"
mode.
A "Zoom" function enables you to
enlarge the map around the selected
point, in accordance with the eleven
preset levels relating to the following
scales:
100 m/cm, 200 m/cm, 500 m/cm,
1 km/cm, 2 km/cm, 5 km/cm,
10 km/cm, 20 km/cm, 50 km/cm,
100 km/cm, 200 km/cm.
This is achieved by turning the dial. This mode permits:
selection of any point on the map
to obtain guidance towards it or to
obtain information about it (postal
address if available or, if it is not,
GPS coordinates),
lateral movement on the map by means of the four directional
arrows, representing the four cardi
nal points (North, East, South,
West),
zooming in on the map in accor dance with the eleven preset lev
els,
displaying of the "Map" contextual
menu.
YOUR 307 IN DETAIL
80
"Navigation Guidance" contextu
al menu
"Selection Movement on map"
mode**
09-09-2002

The contextual menu associated with
the "Navigation Guidance" applica
tion appears as a superimposed dis
play, when this is the application cur
rently in use in the main screen window.
This menu is limited to the following
functions:
changing of the initial route (enter ing of a diversion),
switching to "Selection Movement on map" mode*,
storing of the current location (postal address if available or, if it
is not, the GPS coordinates),
changing of the route calculation criteria,
stopping or resuming of guidance (displaying of the message which
changes depending on the previ
ous status).
General notes on the "Map" appli
cation*
The map guidance can be displayed
in two ways:
full screen map,
reduced size map on the righthand side and zoom image of the
junction on the lefthand side.
To switch from one to the other,
press the dial for more than two sec
onds.
To switch from one to the other,
press the knob for more than two
seconds.
The "Map" application has two oper
ating modes: "Selection Movement on
map"** mode,
"Vehicle following on map"
mode.
A "Zoom" function enables you to
enlarge the map around the selected
point, in accordance with the eleven
preset levels relating to the following
scales:
100 m/cm, 200 m/cm, 500 m/cm,
1 km/cm, 2 km/cm, 5 km/cm,
10 km/cm, 20 km/cm, 50 km/cm,
100 km/cm, 200 km/cm.
This is achieved by turning the dial. This mode permits:
selection of any point on the map
to obtain guidance towards it or to
obtain information about it (postal
address if available or, if it is not,
GPS coordinates),
lateral movement on the map by means of the four directional
arrows, representing the four cardi
nal points (North, East, South,
West),
zooming in on the map in accor dance with the eleven preset lev
els,
displaying of the "Map" contextual
menu.
YOUR 307 IN DETAIL
80
"Navigation Guidance" contextu
al menu
"Selection Movement on map"
mode**
09-09-2002

09-09-2002
YOUR 307 IN DETAIL81
This mode permits:
displaying of the vehicle on the map with the route proposed by the
navigation if the guidance is active,
zooming in on the map in accor dance with the eleven preset lev
els,
displaying of the "Navigation
Guidance" contextual menu.
"Vehicle following on map" mode
From the
general menu , the main
"Map" menu offers various options
for guidance management:
switching to "Selection Movement on map" mode**,
direction of the map towards the North or in the direction of the vehi
cle,
recentering of the map around the vehicle when it has disappeared **,
opening of the services selection window visible on the map,
displaying of the window for enter ing the description for recording
the current position of the vehicle
in a directory file.
Map*The contextual menu associated with
the
"Map" application and with the
"Selection Movement on map"
mode appears as a superimposed
display, when these are in use in the
main screen window.
This menu is limited to the following
functions:
displaying of the information on the location selected on the map,
selection of a location on the map as a destination,
storing of the location selected (postal address if available or, if it
is not, GPS coordinates, so that
they can be recorded in a directory
file),
switching to "Vehicle following on map" mode.
* DT colour screen only.
** During the year.
"Map" contextual menu**

YOUR 307 IN DETAIL89
Manual operation
If you wish, you can make a different
choice from that offered by the sys
tem by changing a setting. The other
functions will still be controlled auto
matically. Pressing the "AUTO" but
ton returns the system to completely
automatic operation.
4. Air conditioning
Press this button to switch
off the air conditioning. The
symbol "ECO" is displayed.
Automatic operation of the
air conditioning is resumed
when the button is pressed again.
The symbol "A/C" is displayed.
Note
It is quite normal that the condensa
tion created by the air conditioning
results in a flow of water under the
vehicle when it is stationary.
5. Air distribution
Pressing this button several
times in succession
enables the air flow to be
directed in turn towards:
– the windscreen (deicing or demist ing), – the windscreen and the footwells,
– the footwells,
– the centre and side vents and the
footwells,
– the centre and side vents.
6. Air flow
The flow of air can be
increased or reduced
by pressing buttons +
or – respectively.
7. Air intake Press this button for recir
culation of the interior air.
Recirculation, shown on
the display, enables the
passenger compartment to be insu
lated from exterior odours and
smoke.
Avoid prolonged recirculation of inte
rior air. To do this, press the button
again to resume intake of exterior air. 8. Switching the system off
The "OFF" button enables
the entire system to be
switched off.
9. Demisting the rear screen and the mirrors
Press this button to demist
the rear screen and the mir
rors. Demisting switches
off automatically. It is possi
ble to stop operation of the
demisting before it is switched off
automatically by pressing the button
again.
Important precaution
Operate the air conditioning for 5 to
10 minutes, once or twice a month,
to keep it in good working order.
If the system does not produce cold
air, do not use it and contact your
PEUGEOT dealer.
Note : to optimise the operation of the
air conditioning, leave the vents
open.
09-09-2002