display Peugeot 307 SW 2003.5 Owner's Manual

29-09-2003








/
*'
 0 This allows you to
('
the screen and thus select a function.
It also allows you:
– with a 1!'%1 type parameter, after selection, to '!'or ''!' the
value,
– with a 1 !1type parameter, to open the list and !
*%*the values.
– with (2guidance, to increase the 3(.
"'!!%
*'
 0 This allows: – '!! to the list of controls (contextual menu) of the permanent display, if
there is no other display superimposed.
– /( of the selected function or the modified value.
– !' ' of a 1!'%1 or1 !1 type parameter for modification.
1
1
$0
– brief press: modification of permanent display (audio system, navigation/ guidance...),
– Press for more than two seconds: display of %''
/(.
1 +1
$0
– brief press: ' %of operation in progress or '!%of last superim-
posed display.
– pressing for more than two seconds: erasing of all superimposed displays and return to the permanent display.
11
$0 – Brief press: access to the %''
('.
– Press for more than two seconds: access to the *' 2
('.
*'

4'&2 This lets you select and validate the functions, controls and programmesdisplayed.

29-09-2003







5
Select the Navigation/Guidance icon using the dial , then validate by
pressing the dial to access the main
1%
,
'1 menu.
''
('
Switch on the RT3 GPS audio/tele- phone and insert the navigation CD-Rom. Press the 11button to access
the %''
(' .
During guidance, if the navigation CD-Rom is present, the screen displays dif- ferent information depending on the manoeuvres to be carried out. -. Current manoeuvre or compass or course (if calculation in progress or zone not mapped).
. Next manoeuvre to be carried out.
. Next road to be taken.
5. Current road.
6. Estimated time of arrival at destination.
7. Distance to final destination.
. Distance to next manoeuvre.
'!0

– depending on the situation of the vehicle and on the reception of GPS infor- mation, this information may disappear from the screen temporarily,
– during guidance, the navigation CD ROM must remain in the RT3 GPS audio/telephone.
''
'!

*'
!2 &
*('
!''
+ + 
!''



29-09-2003






6
The main 1%
,
'1
menu offers various options for acti- vation or management of guidance:
– choice of the type of destination address (entering of address, ser- vice, GPS co-ordinates, storedaddress),
– modification to the initial route (entering of a diversion),
– displaying of the chosen destination,
– setting of the guidance option parameters,
– stop or resume guidance (displaying of the message which changes depending on the previous status).
%
,
'
The
1 ' '

'!1 menu
offers various options for reaching a destination:
 entering a postal address,
 selecting a service available in a town (town hall, hotel, cinema, air- port...),
 entering GPS details,
 selecting a destination stored in the directory,
 selecting one of the last ten desti- nations.
' '%

'!The last guidance address is dis- played. Select and validate in succession the entry zones
181, 11 , then
" 9 " to fill them in.
The 1:1 function permits validation
of the address and access to theguidance activation function. The 1 '1 function permits record-
ing of the address in a directory file.The 1+.
.1 function permits
display of the current address.
'%

'!!

29-09-2003







7
To enter the name of a town, select each letter by turning the dial, thenvalidate each letter by pressing thedial. If an error is made entering the letters, the 1+*%'1 function permits eras-
ing of the last letter entered. '0 following the validation of a
letter, only those which could make up a name existing in the database
appear. As letters are entered, the 1!1
function indicates the number of towns beginning with the same
letters. Activation of this functionpermits selection of a town from thelist. When the list contains fewer thanfive names, these are displayed
automatically. Select a town thenvalidate by pressing the dial. When the complete name of the town is displayed, select the
1:1
function then confirm by pressing thedial. '0 once the town has been
entered, you can confirm by pressing 1:1 . You will then be guided to the
centre of this town automatically.
'%
*'
('
/
*'
 Enter the name of the street in the same way as the name of the town. When the full name of the street is displayed, select the 1:1function
then confirm by pressing the dial.
'%
*'
8


!%
*'
 2*('
4'&2 Press the numeric key which corre- sponds to the letter required until theletter appears on the screen, thenconfirm by pressing the ;key after
each letter.
'%
*'
('
/
*'
8
Enter the number of the street previ- ously entered. Select the
1:1function, then confirm
by pressing the dial.'0
if the number of the street
entered is not available, it is rejected.
You can also select a street from the 1<!1 function, which avoids
having to enter the street number. '0
if the street selected does not
have a number, the list of junctions is
displayed automatically.
*'
/
'!
!
!2 &'.
' '
*'
1:1
/=
*'
/(
$&
2'!!%
*'


'!!
*'
%'

/.
> 8
*'
!!
%'
$&
*'
!&!'(.
'%
*'
($'
/
*'


?

29-09-2003







The most recent destinations are shown. There are three possible methods of defining the location to which youwish to travel:
– accept the last details input by means of the 1:1function,
– input the details of your destination,
– automatically input the details of your current location by means of the 1+.
.1 function.
"
' !
The last address entered is displayed. There are three options for defining the location in which you wish toobtain this service:
– accept the last address entered
using the 1:1function,
– fill in the 181and 11
zones,– automatically enter the name of
your current location using the
1+.
.1 function.
' '%

!'' If you wish to be directed to a service, select the
'%&corresponding to
the service, then confirm by pressingthe dial. The list of services corresponding to the category selected is displayed. Select the !''then confirm by
pressing the dial to access the
1+*'
/

1 function.
An indication on the edge of the screen (x/n) shows you the maxi-mum number of establishments pro-viding the same service within aradius of 30 miles (50 km), as thecrow flies, from the selected location. Use buttons 1@1and 1A1to consult
the list provided.When the establishment of your choice is displayed, you can:
 select the 1:1function to activate
guidance towards this service,
 select the 1 '1function to enter
this establishment in your directory.
'0
if the service selected is not
available in the programmed location, a temporary message informs you of this.
Following validation of the location,the service closest to it is displayed.The distance indicated is thedistance as the crow flies from theservice to the selected location.

29-09-2003







B
Select the CC
'&CC function to
access the file in which the address you are looking for is archived. Select a description by scrolling down the list by means of the dial,then confirm by pressing the dial.The directory file is then displayed. Select the 1:1function, then press
the dial to access the guidance acti- vation function.
> 8
*'
'!
%'
$&
*' !&!'(.
' '%

'!
!'

*'
'&

Select the
1"'!
'!!1
function to access one of the last twenty addresses stored. Select a description by scrolling down the list by means of the dial,then confirm it by pressing the dial.The complete address is then dis-played. Select the 1:1function, then press
the dial to access the guidance acti- vation function.
> 8
*'
!!
%'
$&
*'
!&!'(.
' '
/
'
/
*'
!
''!!Activate the function
CC
'
'CC,
then input the distance involved in the change required. Select the ' C:CCfunction then validate
by pressing the dial.The system calculates the change which is closest to the value inputand gives you the option of whetheror not to use this change.
' !
/
*'
'
You can consult the destination address at any time by activating the
1+*!'
'!1 function on
the 1%
,
'1 menu.
+*%%
*'

'

29-09-2003






D
The menu CC'
2!CC
provides access to the following functions:
– changing of the route calculation criteria,
– voice synthesis adjustment of guidance messages,
– description of the information relating to the navigation CD-Rom,
– management of the addresses stored in the directory.
'
2!
The last criterion used is displayed. Select a criterion from the list, then validate by pressing the dial. When the criterion of your choice has been selected, select the
1:1
function then confirm by pressing thedial.
?!%
*'
'
!&*'!!' Select the type of voice 1( '1or
1/'( '1 , after inserting the configu-
ration CD-Rom. Adjust the volume of the voice synthesis by turning the dial, then validate bypressing the dial. '0
the volume can also be adjusted
during a message, using the audio/ telephone button or the steeringwheel control. %'('
/
*'
'& This function enables you to rename
an address stored in the directory. Select the description corresponding to the stored address to be changed. Select the
1'('1 function, then
confirm by pressing the dial. Select the 1:1function, then confirm
by pressing the dial to record the changes made.
22%E'!(%
%'
 "Stop guidance" During guidance, select this function then validate.
 "Resume guidance" In the absence of guidance, select this function then validate to activateguidance to the last destination pro-grammed. '0
after re-starting the engine, a
screen appears enabling you to resume guidance activated before
the ignition was switched off.
+  
'

29-09-2003
The contextual menu associated with the 1%
,
'1
application appears as a superim-
posed display, when this is the application currently in use in the
main screen window. This menu is limited to the following functions:
– changing of the initial route (entering of a diversion),
– switching to "Selection-Movement on map" mode*,
– storing of the current location (postal address if available or, if it is not, the GPS co-ordinates),
– changing of the route calculation criteria,
– stopping or resuming of guidance (dis- playing of the message which changesdepending on the previous status).







B
1%
,
'1
'F
('
+
#//
'!!%'
+*' )


//
/( This function enables you to receive
messages regarding the traffic
conditions (accidents, traffic jams,
weather, ...). They may appear temporarily as a superimposed display or be read by
the voice synthesiser, if it is active.
In map mode*, special TMC symbols are displayed depending on the typeof information. Select the
1

+
//
/,
(1 function on the 1' '(,
!1
menu, you can choose:
– "Consult the messages",
– "Filter the TMC info": – in relation to a route, if guidance is in progress,
– in relation to a type of event,
– around a location and/or the vehicle,
– "Voice synthesiser",
– "Activate/Deactivate traffic info".
* DT colour screen only.

29-09-2003







B
From the %''
(' , the main
121 menu offers various options
for guidance management:
– switching to "Selection-Movement on map" mode,
– direction of the map towards the North or in the direction of the vehicle,
– recentering of the map around the vehicle,
– opening of the services selection window visible on the map, such as hotels, service stations, etc.
– displaying of the window for entering the description for recording thecurrent position of the vehicle in adirectory file.
2G
The contextual menu associated with the
121application and with
the 1 ' ','('

(21
mode appears as a superimposed
display, when these are in use in the
main screen window. This menu is limited to the following functions:
– displaying of the information on the location selected on the map,
– selection of a location on the map as a destination,
– storing of the location selected (postal address if available or, if it is not, GPS co-ordinates, so thatthey can be recorded in a directoryfile),
– switching to "Vehicle following on map" mode.
* DT colour screen only.
121
'F
('

+ & 
'(&
The confidential card contains the identification code necessary for anywork carried out by a PEUGEOTdealer on the electronic immobiliser
system. This code is hidden by afilm, which should be removed only if
necessary.
4

.0(
'(&


+

'9
,(
 &


,
'6
4.

-  
A buzzer sounds on opening the dri-
ver's door, if the key has been left inthe ignition.
- -


(.
+


(*
'(
Warning that the battery is flat is given by an audible signal accompa-nied by the message
::*
';
(
(.
::
on the multi-func-
tion display.
To replace the battery, remove the screw then unclip the casing using acoin at the ring (CR 2016/3 volt battery). If the remote control does not work after the battery has been changed,reprogramme the remote control.
<(-(** -


(* '(
 Switch off the ignition.
 Switch the ignition on again.
 Immediately press button .
 Switch off the ignition and remove the remote control key
from the ignition lock. The remotecontrol is now working again.

!"
#


$!2


8 This locks the engine control system as soon as the ignition has been
switched off and therefore preventsstarting of the vehicle by anyone
who does not have the key. The ignition key has an electronic chip which has a special code.When the ignition is switched on, thecode must be recognised for startingto be possible.
+


.*
&

+0'  '(('. , the central locking button
indicator light, situated in the centreof the fascia, flashes rapidly whenthe ignition is switched on (2ndnotch), accompanied by an audiblesignal and the message = ;
+
&, '
+0.= on the multi-function
display. In this case your vehicle will not start.
Contact a PEUGEOT dealer as soon as possible.
29-09-2003