ECO mode Peugeot 308 SW BL 2013 Owner's Manual

This personal space offers advice and other useful information for
the care and maintenance of your vehicle.

You can find your user guide on the PEUGEOT website, under theheading "Personal space".

Referring to the user guide on-line also gives you access to thelatest information available, easily identified by the bookmarks, associated with this pictogram:
If the heading "Personal space" is not available on the public websitefor your country, you can find your user guide at the following address:http://public.servicebox.peugeot.com

the link in "Private customer access",
the language,
the model,
the edition date appropriate for the date of registration of your vehicle.
Please note the following point:
The fitting of electrical equipment or accessories which are not recommended by PEUGEOT may result in a failure of your vehicle's electronic system. Please note this specific warning.It is advisable to contact a PEUGEOT dealer to be shown the recommended equipment and accessories.
Select:
You will find your user guide, presented in the same way as the paper version.

3
CONTENTS
Direction indicators 137
Hazard warning lamps 137
Horn 137
Tyre under-infl ation detection 138
Emergency or assistance call 139
Braking assistance systems 139
Trajectory control systems 140
Front seat belts 141
Airbags 146
SAFETY 137 Î 149
Parking brake 150
Manual gearbox 150
Gear shift indicator 151
Hill start assist 152
6-speed electronic
gear control gearbox 153
Automatic gearbox 157
Stop & Start 160
Speed limiter 163
Cruise control 165
Parking sensors 167
DRIVING 150 Î 168
Bonnet 170
Running out of fuel (Diesel) 171
Petrol engines 172
Diesel engines 173
Checking levels 174
Checks 176
CHECKS 169 Î 177
Temporary puncture repair kit 178
Changing a wheel 187
Changing a bulb 194
Changing a fuse 201
Battery 207
Energy economy mode 210
Changing a wiper blade 211
Towing the vehicle 211
Towing a trailer 214
Very cold climate screen 215
Fitting roof bars 216
Accessories 217
PRACTICAL
INFORMATION 178 Î 218
Petrol engines 219
Petrol weights 222
Diesel engines 228
Diesel weights 231
Dimensions 240
Identifi cation markings 241
TECHNICAL
DATA 219 Î 242
AUDIO EQUIPMENT
and TELEMATICS 243 Î 364
VISUAL SEARCH 365 Î 371
ALPHABETICAL
INDEX 372 Î 376
Emergency or assistance 243
Peugeot Connect Media
Navigation (NG4 3D) 247
Peugeot Connect Navigation (RT6) 291
Peugeot Connect Sound (RD5) 345
8
9
10
11
12

–
15
FAMILIARISATION
VENTILATION

Digital air conditioning:
we recommend use of the fully automatic mode by pressing the "AUTO"
button.

I require...



Heating or Manual Air Conditioning




Air distribution



Air fl ow



Air recirculation /

Intake of outside air



Temperature



Manual A/C




HOT




COLD




DEMISTING

DEFROSTING




Recommended interior settings

20
FAMILIARISATION

Stop & Start

Going into engine STOP mode
Going into engine START mode
Deactivation / Activation DRIVING
SAFELY




161
You can deactivate the system at any
time by pressing "ECO OFF"
; the warn-
ing lamp in the button comes on.
The "ECO"
warning lamp comes on
in the instrument panel and the en-
gine automatically goes into standby: The "ECO"
warning lamp goes
off and the engine restarts au-
tomatically:


- with a manual gearbox
; when you
fully
depress the clutch pedal,

- with a 6-speed electronic gear
control gearbox;



●
gear lever in position A
or M
, when
you release the brake pedal,

●
or gear lever in position N
and the
brake pedal release, when you
move to position A
or M
,

●
or when you engage reverse.


- with a manual gearbox
; at speeds
below 12 mph (20 km/h), put the
gear lever into neutral, then release
the clutch pedal,

- with a 6-speed electronic gear
control gearbox
; at speeds below
5 mph (8 km/h), when you press
the brake pedal or move the gear
lever to position N
.
In certain circumstances, STOP mode
may not be available; the "ECO" warn-
ing lamp fl ashes for a few seconds,
then goes off.



160
If you change gear without com-
pletely declutching, the engine will
not restart automatically. An alert
message is displayed to encour-
age you to fully depress the clutch
pedal.



161
The system is reactivated auto-
matically at every new start using
the key.
Before refuelling or doing anything
under the bonnet, you must switch
off the ignition with the key. In certain circumstances, START mode
may be invoked automatically; the
"ECO"
warning lamp fl ashes for a few
seconds, then goes off.

21
FAMILIARISATION
DRIVING SAFELY

Speed limiter "LIMIT"
Display in the instrument panel



1.
Limiter mode Selection / Off.

2.
Decreasing of the programmed
value.

3.
Increasing of the programmed
value.

4.
Speed limiter On / Off.
The cruise control or speed limiter mode
appears in the instrument panel when it
is selected.

1.
Cruise control mode Selection / Off.

2.
Programming a speed / Decreasing
of the programmed value.

3.
Programming a speed / Increasing
of the programmed value.

4.
Cruise control Off / Resume.


Cruise control "CRUISE"


Cruise control

Speed limiter




165




163
In order to be programmed or activated,
the vehicle speed must be higher than
25 mph (40 km/h), with at least fourth gear
engaged on the manual gearbox (second
gear for the 6-speed electronic gear con-
trol gearbox or automatic gearbox). The values must be set with the engine
running.

1
37
INSTRUMENTS and CONTROLS


Stop & Start


fi xed. When the vehicle stops (red
lights, traffi c jams, ...) the
Stop & Start system has
put the engine into STOP
mode. The warning lamp goes off and the engine
restarts automatically in START mode, as soon
as you want to move off.

fl ashes for a
few seconds,
then goes off. STOP mode is temporarily
unavailable.
or
START mode is invoked
automatically. Refer to "Driving - § Stop & Start" for special
cases with STOP mode and START mode.

Warning lamp



is on



Cause



Action / Observations





Passenger's
front airbag
fi xed on the
seat belt and
passenger's
front airbag
warning lamps
display. The control switch, located
on the passenger's side of
the dashboard, has been
placed in the "ON"
position.
The passenger's front
airbag is activated.
In this case, do not install a
"rear facing" child seat. While you do not have a rear-facing child
seat fi tted to the front passenger seat, it is
recommended that the passenger's front airbag
be activated.
On the other hand, before fi tting a rear-facing
child seat, you must turn the control switch to the
"OFF"
position.

2
46
MULTIFUNCTION SCREENS

Vehicle confi guration
Options
Once the "Options" menu has been se-
lected, you can start diagnostics on the
state of the vehicle (current alerts).
Languages
Once the "Languages" menu has been
selected, you can change the language
used by the display (Français, Italiano,
Nederlands, Portugues, Portugues-Brasil,
Deutsch, English, Espanol).

Display settings
Once the "Display settings" menu has
been selected, you can gain access to
the following settings:


- year,

- month,

- day,

- hour,

- minutes,

- 12 or 24 hour mode.
Units
Once the "Units" menu has been se-
lected, you can change the units of the
following parameters:


- temperature (°C or °F),

- fuel consumption (l/100 km, mpg or
km/l).




)
Once you have selected a setting,
press the "OK"
button to change its
value.


)
Wait for approximately ten sec-
onds without any action to allow
the changed data to be recorded or
press the "ESC"
button to cancel.
The screen then returns to the normal
display.

Once the "Vehicle confi guration" menu
has been selected, you can activate or
deactivate the following equipment:


- wiper linked with reverse gear (see
"Visibility"),

-
daytime running lamps (see "Visibility"),

- rear parking sensors (see "Driving").


For safety reasons, confi guration
of the multifunction screen by the
driver must only be done when sta-
tionary.

2
48
MULTIFUNCTION SCREENS

For safety reasons, confi guration
of the multifunction screen by the
driver must only be done when sta-
tionary.

Screen display settings
Once the "Display settings" menu has
been selected, you can gain access to
the following settings:


- year,

- month,

- day,

- hour,

- minutes,

- 12 or 24 hour mode.
Languages
Once the "Languages" menu has been
selected, you can change the language
used by the display (Français, Italiano,
Nederlands, Portugues, Portugues-Brasil,
Deutsch, English, Espanol).

Units
Once the "Units" menu has been se-
lected, you can change the units of the
following parameters:


- temperature (°C or °F),

- fuel consumption (l/100 km, mpg or
km/l).



)
Once you have selected a setting,
press the " 
" or " 
" buttons to
change its value.


)
Press the " 
" or " 
" buttons to
switch respectively to the previous
or next setting.

)
Press the "OK"
button to record
the change and return to the normal
display or press the "ESC"
button to
cancel.



Vehicle confi guration


Options
Once the "Options" menu has been se-
lected, you can start diagnostics of the
status of the equipment (active, not ac-
tive, faulty). Once the "Vehicle Confi guration" menu
has been selected, you can activate or
deactivate the following equipment:


- wiper linked with reverse gear (see
"Visibility"),

- daytime running lamps (see "Visibility"),

- rear parking sensors (see "Driving").

2
55
MULTIFUNCTION SCREENS

"SETUP" menu


Language and speech
This menu allows you to:


- select the language used by the
display (Deutsch, English, Espanol,
Français, Italiano, Nederlands,
Polski, Portugues, Portugues-Brasil,
Türkçe * ),

- select the voice recognition parame-
ters (activation/deactivation, advice
on use, personal voice program-
ming, etc.),

- set the volume of the voice synthe-
siser.

Date and time
This menu allows you to set the date
and time, the format of the date and the
format of the time.

Principle of GPS (GMT) synchronisation:


1.
Confi rm the selection "Synchronise
with GPS", the time is then aligned
with GMT universal time, the date is
updated as well.

2.
Using the 4-direction navigator, move
the cursor onto the hours fi eld and
press on OK
.

3.
Using the rotating ring, you can then
adjust the time to the time zone of your
choice.
Note that in the case of a summer/win-
ter time change, the time zone must be
set again manually.


Display
This menu allows you to set the bright-
ness of the screen, the screen colour
scheme and the colour of the map (day/
night or auto mode).

Units
This menu allows you to select the
units: temperature (°C or °F) and dis-
tance (miles or km).



)
Press the "SETUP"
button to gain
access to the "SETUP"
menu. This
allows you to select from the follow-
ing functions:


- "Language and speech",

- "Date and time",

- "Display",

- "Units",

- "System".

System
This menu allows you to restore the fac-
tory confi guration, display the software
version and activate scrolling text.

For safety reasons, confi guration
of the multifunction screen by the
driver must only be done when
stationary.


*
According to country.

2MULTIFUNCTION SCREENS






A few definitions
(trip computer)
When the range falls below 20 miles
(30 km), dashes are displayed. After fi ll-
ing with at least 5 litres of fuel, the range
is recalculated and is displayed when it
exceeds 60 miles (100 km).
If dashes are displayed continu-
ously while driving in place of the
digits, contact a PEUGEOT dealer
or a qualifi ed workshop. This function is only displayed from
20 mph (30 km/h).
This value may vary following a
change in the style of driving or
the relief, resulting in a signifi cant
change in the current fuel con-
sumption.
Range
(miles or km)
This indicates the distance
which can still be travelled
with the fuel remaining in the tank in
relation to the average fuel consump-
tion over the last few miles (kilometres)
travelled.
Current fuel consumption
(mpg or l/100 km or km/l)
This is the average fuel con-
sumption during the last few
seconds.

Average fuel
consumption
(mpg or l/100 km or km/l)
This is the average fuel con-
sumption since the last trip
computer zero reset.
Distance travelled
(miles or km)
This indicates the distance
travelled since the last trip
computer zero reset.


Average speed
(mph or km/h)
This is the average speed cal-
culated since the last trip com-
puter zero reset (ignition on).

Distance remaining to
destination
(miles or km)
This is the distance remaining
to be travelled to the fi nal destination. It
is either calculated instantly by the navi-
gation system, if guidance is activated,
or entered by the user.
If the distance is not entered, dashes
are displayed in place of the digits.








Stop & Start time counter
(minutes / seconds or hours /
minutes)
If your vehicle is fi tted with
Stop & Start, a time counter calculates
the time spent in STOP mode during a
journey.
It resets to zero every time the ignition
is switched on with the key.