lumbar support Peugeot 308 SW BL Dag 2008 Owner's Manual

!
!
61
COMFORT
No person or object should prevent
the seat slide from returning to its
initial position; the return to this po-
sition is necessary for longitudinal
locking.


Access to the rear seats (3-door)

 Pull the control upwards to fold the
seat back and move the seat for-
ward.
When put back in place, the seat re- turns to its initial position.
Head restraint height and angle
adjustment


To raise the head restraint, pull it for-
wards and upwards at the same time.


To remove the head restraint, press the lug

A and pull the head restraint upwards.

 To put the head restraint back in place,
engage the head restraint stems in the
openings keeping them in line with the
seat back.

 To lower the head restraint, press the lug A
and the head restraint at the same time.


To adjust the angle of the head restraint,
tilt its lower part forwards or rearwards.
The head restraint is fi tted with a
frame with notches which prevents
it from lowering; this is a safety de-
vice in case of impact.

The adjustment is correct when the
upper edge of the head restraint is
level with the top of the head.
Never drive with the head restraints
removed; they must be in place and
adjusted correctly.
Lumbar adjustment

 Turn the dial to obtain the correct
lumbar position.
Additional adjustments

 Lower the support B incorporated in
the control to rest the seat belt on
it. It enables you to retrieve the seat
belt more easily when you need to
put it back on.