engine PEUGEOT 4007 2009.5. User Guide
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2009.5., Model line: 4007, Model: PEUGEOT 4007 2009.5.Pages: 230, PDF Size: 16.57 MB
Page 30 of 230
1
INSTRUMENTS and CONTROLS
The total distance is
displayed in zone 1 of
the display and the trip
distance in zone 2 .
DISTANCE RECORDERS (A/B) DISTANCE RECORDERS (A/B)
System for measuring the total distance
travelled by the vehicle during its service
life and the distance travelled in a day
or other period until it is reset to zero by
the driver.
Zero reset
With the ignition on, press the INFO
button for more than 2 seconds until
zeros appear. When the engine is
running, this indicates
the temperature of the
coolant.
COOLANT TEMPERATURE
If the bar is close to the
critical position
located on the right, the temperature is
too high.
T h e s y m b o l fl a s h e s w h e n y o u r e n g i n e
is overheating.
I t i s i m p e r a t i v e t h a t y o u s t o p y o u r
v e h i c l e s a f e l y .
W a i t a f e w m i n u t e s b e f o r e s w i t c h i n g
o f f t h e e n g i n e .
Wait for the engine to cool before
topping up the level. The cooling
system is pressurised.
When the engine is
running , this indicates
the distance which can
still be travelled with the
fuel remaining in the tank
in relation to the average
consumption over the
last few miles/kilometres
travelled.
RANGE
When the range is less than 30 miles
(50 km) , dashes are displayed.
Fill the fuel tank as soon as possible.
The display of the range is updated.
To avoid any risk of scalding,
unscrew the cap by two turns to
allow the pressure to drop.
When the pressure has dropped,
remove the cap and top up the
level, if necessary.
Consult a PEUGEOT dealer. T h i s fi g u r e m a y i n c r e a s e
following a change in the style
of driving or the relief, resulting
in a reduction in the current
consumption.
If you only add a few litres, the
value displayed will be incorrect.
T h e r e f o r e , y o u m u s t fi l l t h e t a n k
whenever possible.
When you disconnect the battery,
the previous consumption data
is lost and the value displayed
will be different from that
displayed before the battery
was disconnected. The distance
displayed must be considered
an approximate indication.
Page 47 of 230
2
COMFORT
AUTOMATIC AIR
CONDITIONING
Automatic operation
S e t t h e t e m p e r a t u r e c o n t r o l d i a l 3 to
t h e t e m p e r a t u r e r e q u i r e d .
P l a c e t h e a i r fl o w c o n t r o l d i a l 2 in
the "AUTO" p o s i t i o n .
Place the air distribution adjustment
dial 1 in the "AUTO" p o s i t i o n .
When the engine is cold, to avoid
an excessive distribution of cold
air, the ventilation will reach its
o p t i m u m l e v e l g r a d u a l l y .
On entering the vehicle, the in-
t e r i o r t e m p e r a t u r e m a y b e m u c h
colder (or warmer) than the
c o m f o r t t e m p e r a t u r e . T h e r e i s
n o n e e d t o c h a n g e t h e t e m p e r a -
t u r e d i s p l a y e d i n o r d e r t o r e a c h
t h e c o m f o r t r e q u i r e d r a p i d l y .
The automatic regulation of the
a i r c o n d i t i o n i n g w i l l o p e r a t e a t
m a x i m u m p e r f o r m a n c e t o e l i m i -
n a t e t h e t e m p e r a t u r e d i f f e r e n c e
a s q u i c k l y a s p o s s i b l e .
1. Air distribution adjustment
2. A i r fl o w a d j u s t m e n t
3. T e m p e r a t u r e a d j u s t m e n t
4. Rear screen de-icing
5. Air conditioning On/Off
6. Intake of exterior air/Recirculation
of interior air
In automatic mode:
w h e n t h e t e m p e r a t u r e i s s e t t o m a x i -
m u m ( R a p i d h e a t i n g ) , t h e i n t a k e o f
exterior air is activated and the air
c o n d i t i o n i n g s t o p s .
w h e n t h e t e m p e r a t u r e i s s e t t o m i n i -
m u m ( R a p i d c o o l i n g ) , t h e a i r r e c i r c u l a -
tion is activated and the air conditioning
o p e r a t e s .
In accordance with the level of comfort
selected, the system controls the air
d i s t r i b u t i o n , t h e fl o w , t h e t e m p e r a t u r e
and the air intake to guarantee comfort
a n d a s u f fi c i e n t c i r c u l a t i o n o f a i r i n t h e
p a s s e n g e r c o m p a r t m e n t . N o f u r t h e r a c -
t i o n o n y o u r p a r t i s r e q u i r e d .
Page 54 of 230
2
COMFORT
Head restraint height adjustment Front armrest
Heated seats adjustment
The adjustment is correct when
t h e t o p o f t h e h e a d r e s t r a i n t i s
a l i g n e d w i t h t h e t o p o f t h e h e a d
o f t h e s e a t e d p e r s o n .
N e v e r d r i v e w i t h t h e r e m o v e d
head restraints in the vehicle as
they could be thrown around the
v e h i c l e o n s h a r p b r a k i n g . T h e y
m u s t b e i n p l a c e a n d a d j u s t e d
c o r r e c t l y .
After installing the head restraint,
check that the height adjustment
b u t t o n i s l o c k e d c o r r e c t l y .
You can move the console housing cover
i n o r d e r t o u s e i t a s a n a r m r e s t .
With the engine running , tilt the but-
t o n t o t h e p o s i t i o n r e q u i r e d .
T h e t e m p e r a t u r e o f t h e s e a t i s r e g u l a t -
e d a u t o m a t i c a l l y .
T h e r e a r e t w o s e t t i n g p o s i t i o n s :
- " H I " : H i g h h e a t i n g
- "LO": Low heating
When the button is in the intermediate
p o s i t i o n , t h e h e a t i n g i s s w i t c h e d o f f .
The indicator lights A comes on when
t h e s y s t e m i s a c t i v a t e d . T o r a i s e t h e h e a d r e s t r a i n t , p u l l i t u p -
w a r d s .
T o l o w e r t h e h e a d r e s t r a i n t , p u s h i t
d o w n w a r d s p r e s s i n g t h e h e i g h t a d j u s t -
m e n t b u t t o n a t t h e s a m e t i m e .
To remove the head restraint, bring it to
t h e u p p e r m o s t p o s i t i o n t h e n r e m o v e i t
p r e s s i n g t h e h e i g h t a d j u s t m e n t b u t t o n
a t t h e s a m e t i m e .
T o r e fi t t h e h e a d r e s t r a i n t , e n g a g e t h e
stems of the head restraint in the holes
p r e s s i n g t h e h e i g h t a d j u s t m e n t b u t t o n
a t t h e s a m e t i m e .
Page 63 of 230
2
COMFORT
EXTERIOR MIRRORS EXTERIOR MIRRORS
Electric folding/unfolding
- from inside, with the ignition switch i n t h e " O N " o r " A C C " p o s i t i o n
b y p r e s s i n g t h e c o n t r o l C .
- from inside, with the ignition switch i n t h e " L O C K " p o s i t i o n :
b y p r e s s i n g t h e c o n t r o l C , w i t h i n
30 seconds.
- from outside using the remote control:
b y p r e s s i n g t h e " c l o s e d p a d -
l o c k b u t t o n b r i e fl y 3 t i m e s t o f o l d
them,
b y p r e s s i n g t h e " o p e n p a d l o c k "
b u t t o n b r i e fl y 3 t i m e s t o u n f o l d
t h e m .
Adjustment
The mirrors can be adjusted when the
i g n i t i o n s w i t c h i s i n t h e " O N " o r " A C C "
p o s i t i o n .
Move control A to the right or to the left
t o s e l e c t t h e c o r r e s p o n d i n g m i r r o r .
Direct control B in all four directions
t o a d j u s t t h e m i r r o r .
W h e n a d j u s t m e n t i s c o m p l e t e , r e t u r n
control A t o t h e c e n t r a l p o s i t i o n . If you switch the engine off then
re-start it with the mirrors fold-
ed, they will unfold automati-
cally when the vehicle reaches
2 0 m p h ( 3 0 k m / h ) .
If the mirrors have been folded
manually or electrically after
starting the engine, they are not
u n f o l d e d a u t o m a t i c a l l y .
In this case:
Press the control C to unfold
t h e m .
If you have folded the mirrors
using the control
C , you must
use this control to unfold them,
otherwise the mirrors will not be
l o c k e d c o r r e c t l y .
The folding and unfolding of
the exterior mirrors can be con-
fi g u r e d v i a t h e c o l o u r d i s p l a y
" E q u i p m e n t " m e n u o r d e a c t i v a t -
e d b y a P E U G E O T d e a l e r .
T h e m i r r o r s c a n a l s o b e f o l d e d m a n u a l l y .
Page 68 of 230
2
COMFORT
A r m r e s t w i t h s t o r a g e c o m p a r t m e n t s
12 volt socket (120 W max)
Upper storage compartment
P u l l t h e r i g h t - h a n d l e v e r t o o p e n t h e
s t o r a g e c o m p a r t m e n t l i d , w h i c h s e r v e s
a s a n a r m r e s t .
T o c l o s e , f o l d d o w n t h e l i d u n t i l i t l o c k s .
12 volt socket (120 W max)
L o w e r s t o r a g e c o m p a r t m e n t
P u l l t h e l e f t - h a n d l e v e r t o o p e n t h e l i d .
T o c l o s e , f o l d d o w n t h e l i d u n t i l i t l o c k s .
T h i s i s o p e r a t i o n a l w h e n t h e i g n i t i o n
s w i t c h i s i n t h e " L O C K " , " O N " o r " A C C "
p o s i t i o n .
C h e c k t h a t t h e e l e c t r i c a l e q u i p m e n t
o p e r a t e s c o r r e c t l y w i t h a v o l t a g e o f
1 2 v o l t s a n d t h a t i t s e l e c t r i c a l p o w e r i s
1 2 0 W m a x i m u m .
T h e p r o l o n g e d u s e o f e l e c t r i -
c a l e q u i p m e n t w i t h o u t r u n n i n g
the engine may discharge the
b a t t e r y .
Page 69 of 230
2
COMFORT
Removable ashtray
P u l l t h e c o v e r t o o p e n t h e a s h t r a y .
T o e m p t y , r e m o v e t h e a s h t r a y b y p u l l i n g
i t u p w a r d s .
12 volt socket (120 W max)
T h i s o p e r a t e s w h e n t h e i g n i t i o n s w i t c h i s
i n t h e " L O C K " , " A C C " o r " O N " p o s i t i o n .
O p e n t h e c o v e r t o g a i n a c c e s s t o t h e
s o c k e t .
C h e c k t h a t t h e e l e c t r i c a l e q u i p -
m e n t o p e r a t e s w i t h 1 2 v o l t s a n d
t h a t i t s m a x i m u m e l e c t r i c a l p o w er
i s 1 2 0 W .
When you use the two sockets
at the same time, ensure that
t h e t w o i t e m s o f e q u i p m e n t t o -
g e t h e r o p e r a t e w i t h 1 2 V a n d
that their combined electrical
p o w e r i s 1 2 0 W m a x i m u m .
T h e p r o l o n g e d u s e o f e l e c t r i c a l
e q u i p m e n t w i t h o u t r u n n i n g t h e
engine may discharge the bat-
t e r y .
Page 76 of 230
3
ACCESS
The vehicle will relock automati-
cally after thirty seconds unless
a door or the tailgate is opened.
This function prevents inadvert-
ent unlocking.
The duration which precedes
the automatic relocking of the
v e h i c l e c a n b e c o n fi g u r e d v i a
the colour display "Equipment"
menu.
Folding the key
First press button A to fold the key. Electronic engine immobiliser
The key contains an electronic chip
which has a special code. When the igni-
tion is switched on, this code must be
recognised to permit starting.
This electronic engine immobiliser locks
the engine management system a few
moments after the ignition is switched
off and prevents starting of the engine
by anyone who does not have the key.
Anti-theft protection
In the event of a malfunction and if
your vehicle does not start; contact a
PEUGEOT dealer as soon as possible.
Page 77 of 230
3
ACCESS
Starting the vehicle
Insert the key in the ignition switch.
Operate the starter by turning the
key to position 4 (START) .
When the engine turns over, release
the key. The ignition switch is placed
in position 3 (ON) automatically. Switching the vehicle off
Park the vehicle.
While pressing the key, turn it to-
wards you to position 1 (LOCK) .
Remove the key from the ignition
switch. Changing the battery
Battery reference: CR1616/3 volts.
Unclip the casing using a coin at the
notch.
S l i d e t h e fl a t b a t t e r y o u t o f i t s h o u s i n g .
Slide the new battery into its housing
observing the original direction.
Clip the casing.
Key in ignition
A buzzer sounds on opening the
driver's door, if the key has been
left in the ignition.
Page 79 of 230
3
ACCESS
The vehicle will relock automati-
cally after thirty seconds unless
a door or the tailgate is opened.
This function prevents inadvert-
ent unlocking.
The duration which precedes
the automatic relocking of the
v e h i c l e c a n b e c o n fi g u r e d v i a
the colour display "Equipment"
menu.
Folding the key
First press button A to fold the key. Electronic engine immobiliser
The key contains an electronic chip
which has a special code. When the igni-
tion is switched on, this code must be
recognised to permit starting.
This electronic engine immobiliser locks
the engine management system a few
moments after the ignition is switched
off and prevents starting of the engine
by anyone who does not have the key.
Anti-theft protection
In the event of a malfunction and if
your vehicle does not start; contact a
PEUGEOT dealer as soon as possible.
Page 81 of 230
3
ACCESS
Starting the vehicle
Insert the key in the ignition switch.
Operate the starter by turning the
key to position 4 (START) .
When the engine turns over, release
the key. The ignition switch is placed
in position 3 (ON) automatically. Switching the vehicle off
Park the vehicle.
While pressing the key, turn it to-
wards you to position 1 (LOCK) .
Remove the key from the ignition
switch. Changing the battery
Battery reference: CR1616/3 volts.
Unclip the casing using a coin at the
notch.
S l i d e t h e fl a t b a t t e r y o u t o f i t s h o u s i n g .
Slide the new battery into its housing
observing the original direction.
Clip the casing.
Key in ignition
A buzzer sounds on opening the
driver's door, if the key has been
left in the ignition.