reset PEUGEOT 4008 2014 User Guide

304
04









Selecting an FM / MW / LW station


The exterior environment (hills, buildings, tunnel, car park, below ground...) may prevent reception, even in RDS station tracking mode.
This phenomenon is normal in the propagation of radio waves and is in no way indicative of a fault with the audio system.

Select " FM
" or " MW
" or " LW
".
Press MENU
to display the choice of source.

Select a radio station in the list or press " Tune
"
to change the frequency.

Maintain pressure on " Tune
" until a beep is
heard, for an automatic search for the next
station.

RADIO


Press the arrow
to adjust the RDS or the audio
settings (balance, equaliser, ...).
Press " Station list
" to display the list of radio
stations received locally.

A long press on one of the numbered buttons
presets the current station.

Preset up to 12 stations between FM1 and
FM2.

314
01

Display the track.
Scroll through tracks.
Symbols:
i: iPod
®
.
U: USB.
B: Bluetooth
®
.

Random play in the current
folder.

Switch from audio CD
mode to USB / iPod
® and
Bluetooth modes * .
Press and hold to change to
AUX mode.
Repeat the current track.

FIRST STEPS


Audio system on / off.
Volume adjustment.

Select radio source.
Select waveband (FW,
MW, LW).

*

Available according to version.



Eject CD.
Preset stations, buttons 1 to 6.
Short press: select preset radio
station.
Long press: preset a radio station.

319
04 RADIO


Selecting radio source

Press the RADIO
button to switch on
the radio.

Press the RADIO
button repeatedly
to select the waveband; it changes in
the following order: FM1 / FM2 / FM3 /
MW / LW / FM1...
Automatic station search

Manual station search

Turn the SEL
knob to the left to search
the lower frequencies or to the right to
search the higher frequencies.
Press the "

" or "

" button to search
the lower frequencies or the higher
frequencies respectively.
The search begins automatically and
stops at the fi rst station found.

Selecting the waveband
















Selection / Presetting

320
04

Press one of the six buttons "1" to "6" until an
audible signal is heard.
The sound cuts out then becomes audible again
when the station has been preset.
The number of the button and the associated radio
frequency appear in the screen.
Manual station presetting

To recall the pre-set stored setting, press the button and release it
within two seconds.

RADIO


You can preset up to six stations on each waveband.
Presetting a new station replaces the previous station.
Automatic station presetting

Disconnecting the battery terminals clears the preset radio stations.

Stations can only be preset automatically on wavebands FM1,
FM2 and FM3.
Presetting new stations replaces the previous stations.
This presetting can be activated automatically irrespective of the
waveband selected.

Press the RADIO
button for more than
two seconds.
The six stations offering the best
reception are preset and classifi ed
from the weakest to the strongest on
the six corresponding buttons.

Recalling preset stations

Press one of the six buttons "1" to "6". The station
corresponding to the waveband selected appears on
the screen.

323

04 RADIO


Search for a "PTY" broadcast

Press the PTY/SCAN
button.

Ten seconds after reception, the PTY
mode is cancelled.
Press one of the six buttons "1" to "6" for more than
two seconds.
The sound cuts out then becomes audible again
when the programme has been stored.
The number of the button and the associated PTY
programme appear in the screen.
Presetting a "PTY" programme

You can preset up to six PTY programmes.
Each new programme stored replaces the previous one.

Turn the SEL
knob to select PTY
mode; the symbol fl ashes and an
automatic search is made.
Once the station has been found, its
name appears in the screen.

Press the " 
" or " 
" buttons to fi nd
another station.
Press the PTY/SCAN
button.

Turn the SEL
knob to select PTY

mode, then press one of the six
buttons "1" to "6" to defi ne the preset
location.