lock Peugeot 406 2002.5 User Guide
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2002.5, Model line: 406, Model: Peugeot 406 2002.5Pages: 174, PDF Size: 2.65 MB
Page 91 of 174
29-07-2002
Rear seats, estate
To fold down the rear seat:
remove the head restraints bypressing the lug.
tilt the seat cushion against the front seats, using the strap. secure the side seat belt buckles
on the coat hooks when manoeu
vring the seat back to avoid any
risk of the straps being damaged.
unlock the seat back by pressing button 1. The red marker Aappears.
fold down the seat back gently to avoid blocking the centre belt.
When returning the seat back to the
upright position, ensure that it is
correctly locked (red marker Ano
longer visible). When driving with rear passengers
with one third of the seat folded
down, release the central seat belt
buckle from its catch.
YOUR 406 IN DETAIL
115
WARNING
Do not remove
the seat back of the estate's one piece rear seat.
This seat is fitted with return springs which cancause injury.
Contact a
PEUGEOT dealer
if you wish to remove the seat back.
Page 92 of 174
29-07-2002
Third row seat,
7 seater estate
Do not use the third row seat
when the rear seat is folded down.
Positioning the seat:
– remove the rear parcel shelf.
– fold down panel Ain the boot by
using the handle.
– lift the seat back Bby the head
restraints. – push the seat back firmly, keeping
the seat angled upwards.
– lower the seat and check it has engaged in the notches C. Stowage:
Place the seat belt buckles in their
catches.
Release the seat from the notches
C
Lower the seat back by the head
restraints, keeping the seat cushion
inclined.
Lower the whole seat into the boot
housing.
Lock the boot panel Aby pressing on
the edges.
YOUR 406 IN DETAIL
116
Do not install a child
seat on the third row
seat.
Page 93 of 174
29-07-2002
YOUR 406 IN DETAIL117
''Isofix'' mountings*
Available on the one third side of the
rear seat, the Isofix mountings allow
fitting of a
special child seat,
approved for PEUGEOT vehicles
and sold within its network.
The locks incorporated in the child
seat fit onto the Isofix mountings and
ensure safe, reliable and fast assem
bly.
The special child seat approved by
PEUGEOT is the KIDDY Isofix seat.
It can be used in the rearwards
facing position from birth to 13 kg
and in the forwards facing position
from 9 to 18 kg.
In the forwards facing position, the
front seat must be in the interme
diate longitudinal position, with
the seat back upright.
In this position, the combined use of
the Isofix mountings, the restraining
cushion and the seat belt is compul
sory.
This seat may also be used where
there are no Isofix mountings: in this
case it is compulsory to wear a
three point seat belt.
Follow the instructions in the
brochure for fitting the child
seat.
* According to current legislation
Page 95 of 174
29-07-2002
YOUR 406 IN DETAIL119
Never leave a child or an
animal in a vehicle which
is exposed to the sun and
has the windows closed.
Never leave the keys within reach
of children inside the car.
Disarm the passenger air bag
when installing a rearwards–fac
ing child seat in the front.
The child would risk being killed or
seriously injured if the air bag
were to inflate.
Observe strictly the recommenda
tions for assembling or attaching
the child seat as shown in the
child seat instructions.
From 3 to 10 years (15 to 36 kg)
''Recaro start'': installed in the rear with a three–point seat belt.
The height and width of the seat back must be adjusted acco rding to the age
and build of your child.
"Klippan Optima": installed in the rear with a three–point seat belt.
From the age of 6 years (approximately 22 kg), the booster is used on its
own.
Remember, even for short journeys, to fasten the three point sea t belts or the
child seat straps, keeping the slack in relation to the child' s body to a minimum.
To prevent the doors from opening accidentally, use the child lock.
Also, do not open the rear windows more than a third.
* According to current legislation in the country of destination .
** Unless the rear seats are already occupied by other children or t he rear seats
cannot be used (because they are missing or folded down). In th is case,
adjust the front passenger seat to the rear most position and l eave the air bag
active.
4
5
Page 97 of 174
29-07-2002
SEAT BELTS
To adjust the height of the front
seat belts
Pinch control 1and slide it.
To lock the seat belts
Pull the strap, then insert the buckle
into the stalk. Pre tensioning and force limiting
front seat belts
Safety in the event of a frontal impact
has been improved by the introduc
tion of pre tensioning and force limit
ing front seat belts. Depending on
the seriousness of the impact, the
pre tensioning system instantly tight
ens the seat belt firmly against the
body of the occupant.
The pre tensioning seat belts are
active when the ignition is on.
The force limiting device reduces the
pressure of the seat belt against the
occupant's body in the event of an
accident.
Rear seat belts
The three rear seats are all fitted with
three point inertia reel belts.
YOUR 406 IN DETAIL
121
To be effective, a seat
belt must be tightened as
close to the body as pos
sible.
Depending on the nature and the
seriousness of the impact, the
pre tensioners may be triggered
before and independently of the
air bags.
In all cases, the air bag warning
light comes on.
Following a collision, have the
system checked by a PEUGEOT
dealer.
The system has been designed to
be fully operational for ten years.
Have it replaced after this period.
Page 98 of 174
THE KEYS
The keys allow you to switch on the
ignition and to independently operate
the locks on the front door, the glove
box and the passenger air bag dis
arming switch.
Central locking
From the driver's door, the keys
allow you to lock, deadlock* and
unlock the doors and boot/tailgate.
If one of the front doors is open, the
central locking does not work.
The remote control performs the
same functions at a distance.
The remote control
Locking
Press button Ato lock the vehicle.
YOUR 406 IN DETAIL 105
This is confirmed by fixed lighting of
the direction indicators for approxi
mately two seconds.
Unlocking
Press button
B to unlock the vehicle.
This is confirmed by rapid flashing of
the direction indicators.
Note: do not repeatedly press the
button of your remote control out of
range of your vehicle. You risk caus
ing it not to work and the remote con
trol would have to be reprogrammed. ELECTRONIC ENGINE
IMMOBILISER
This locks the engine management
system as soon as the ignition has
been switched off and therefore pre
vents starting of the vehicle by any
one who does not have the key.
The ignition key has an electronic
chip which has a special code. When
the ignition is switched on, the code is
recognised and starting is possible.
If the system does not function
correctly,
an audible signal sounds,
accompanied by a message on the
multi function display.
WARNING: your vehicle is no longer
protected in this event.
Contact a PEUGEOT dealer as soon
as possible.
Locating your car
To locate your car, if you have locked
it, in a car park:
press button A. The courtesy
lights come on and the direction
indicators flash for a few seconds.
Key in ignition
A buzzer sounds on opening the dri
ver's door, if the key has been left in
the ignition.
29-07-2002
Page 99 of 174
29-07-2002
YOUR 406 IN DETAIL
106
Changing the battery of the
remote control
The information 'battery flat' is
given by an audible signal accompa
nied by a message on the multi
function display.
To replace the battery, unclip the
casing using a coin at the ring
(CR2016/3 volt battery).
If the remote control does not work
after the battery has been changed,
reprogramme the remote control.
Confidential card
The confidential card contains the
identification code necessary for any
work carried out by a PEUGEOT
dealer on the system. This code is
hidden by a film, which should be
removed only if necessary.
Keep your card in a safe place,
never inside the vehicle.
Programming the remote
control Switch off the ignition.
Switch the ignition on again.
press button A.
Switch off the ignition and
remove the remote control key
from the ignition lock. The remote
control is now working again.
DEADLOCKING
Deadlocking the doors is an addtional
safety device.
Warning:
The internal and external door
controls cannot operate when the vehi
cle is deadlocked.
There are two methods of operation:
With the the remote control
To deadlock: pressbutton A.
This is indicated by permanent lighting
of the direction indicators for approxi
mately two seconds.
Press button A within five seconds
of deadlocking to change this to lock
ing only.
This is indicated by permanent lighting
of the direction indicators for approxi
mately two seconds.
With the ignition key from the driver's
door
To deadlock: turn the key towards the
rear of the vehicle.
To lock: within five seconds of deadlock
ing, again turn the key towards the rear
of the vehicle. To unlock: turn the key
towards the front of the vehicle.
Do not operate the dead
locking if there is someone
inside the vehicle.
Do not operate the buttons
of yur remote control while it is in
your pocket, as there is a possibility
that it may unlock your vehicle.
Page 100 of 174
29-07-2002
YOUR 406 IN DETAIL107
Make a careful note of the number on each key. The key number i s coded on the label attached to the key. If
the key is lost, your PEUGEOT dealer can rapidly supply you with ne w keys.
The high frequency remote control is a high performance system.
Do not operate it while it is in your pocket as there is a p ossibility that it may unlock your vehicle without your knowledge .
The remote control cannot operate if the key is in the ignit ion, even if the ignition is switched off, except for reprogram
ming.
Do not operate the deadlock if there is someone inside the vehicle.
As a safety measure (when there are children on board), remove the i gnition key when leaving the vehicle, even for a
short time.
Do not handle the buttons of your remote control when out of range of your vehicle as you run the risk of stopping it from
working.
It would then be necessary to reprogramme the remote control.
When buying a second hand car:
– ensure that you are in possession of the confidential card;
– have the key codes memorised by a PEUGEOT dealer, to ensure that the keys in your possession are the only ones
that can start your vehicle.
Do not make any modifications to the electronic engine immobil iser system.
Page 101 of 174
THE KEYS
The keys allow you to switch on the
ignition and to independently operate
the locks on the front door, the glove
box and the passenger air bag dis
arming switch.
Central locking
From the driver's door, the keys
allow you to lock, deadlock* and
unlock the doors and boot/tailgate.
If one of the front doors is open, the
central locking does not work.
The remote control performs the
same functions at a distance.
The remote control
Locking
Press button Ato lock the vehicle.
YOUR 406 IN DETAIL 105
This is confirmed by fixed lighting of
the direction indicators for approxi
mately two seconds.
Unlocking
Press button
B to unlock the vehicle.
This is confirmed by rapid flashing of
the direction indicators.
Note: do not repeatedly press the
button of your remote control out of
range of your vehicle. You risk caus
ing it not to work and the remote con
trol would have to be reprogrammed. ELECTRONIC ENGINE
IMMOBILISER
This locks the engine management
system as soon as the ignition has
been switched off and therefore pre
vents starting of the vehicle by any
one who does not have the key.
The ignition key has an electronic
chip which has a special code. When
the ignition is switched on, the code is
recognised and starting is possible.
If the system does not function
correctly,
an audible signal sounds,
accompanied by a message on the
multi function display.
WARNING: your vehicle is no longer
protected in this event.
Contact a PEUGEOT dealer as soon
as possible.
Locating your car
To locate your car, if you have locked
it, in a car park:
press button A. The courtesy
lights come on and the direction
indicators flash for a few seconds.
Key in ignition
A buzzer sounds on opening the dri
ver's door, if the key has been left in
the ignition.
29-07-2002
Page 102 of 174
29-07-2002
SPECIAL FEATURES
170
THE ALARM SYSTEM
Setting and disarming the
alarm
Setting and deactivating the alarm
The alarm completes the security
equipment for your vehicle. It offers
two types of protection. exterior protection: when it is set,
the alarm sounds if a door, the
boot or the bonnet is opened;
interior protection: when it is set,
the alarm sounds if the sensors
detect a variation in the air move
ment inside the vehicle (break
ing of a window) or movement
inside the vehicle.
The alarm is also equipped with an
anti tamper function.
The alarm is also equipped with an
anti tamper function.
If an attempt is made to tamper with
the wires to the siren, control unit or
the battery, the alarm is triggered:
the siren sounds and the headlamps
come on. Setting the alarm
(interior and exterior protection)
Switch the ignition off and get out
of the vehicle.
Press the locking button of the remote
control key.
The doors lock.
The direction indicators light for two
seconds.
The red light on the switch flashes once
a second.
5 seconds later, exterior protection is set.
50 seconds later, interior protection is set.
Note:
when the alarm is triggered, the
siren sounds for thirty seconds. After
the thirty seconds it stops, but the
alarm remains set.
Warning
If, on setting the alarm, a door, the boot
or the bonnet are not closed correctly,
the siren sounds for a moment. If the
vehicle is closed correctly in the follow
ing 45 seconds, the alarm is set and
the direction indicators remain on for
two seconds. In all cases, the alarm is
set after 45 seconds. Disarming the alarm
(interior and exterior protection)
Press the unlocking button of the
remote control key.
The doors unlock.
The direction indicators flash for two
seconds.
The red warning light on the switch
goes out.
Note:
if the warning light continues
to flash after disarming the alarm, it
is a sign that the alarm has been trig
gered. The flashing will stop when
the ignition is switched on.