clutch Peugeot 406 2002.5 Owner's Manual

YOUR 406 AT A GLANCE13
Do not use cruise control
on slippery roads or in
heavy traffic.
CRUISE CONTROL
Cruise control enables the vehicle to maintain a steady speed
program
med by the driver, regardless of the road characteristics and witho ut the
driver having to touch the accelerator or brake pedals.
In order for it to be memorised, the vehicle speed must be great er than
25 mph (40 km/h) and 4th or 5th gear must be engaged.
Operation
 Place switch 1in the ONposition.
A speed can now be memorised.
 Place switch 1in the OFFposition to deactivate the system.
Memorising a speed
As soon as you reach the chosen speed, press button 2or 3. This memo
rises the speed, which will be maintained automatically.
Note: It is possible to accelerate momentarily without disarming the
cruise control.
Cancelling the memorised speed
If you wish to cancel the memorised speed:
 Press button 4or the brake or clutch pedal.
Recalling the memorised speed
After cancelling, press button 4. Your vehicle will return to the
last memorised speed. Changing a memorised speed
To memorise a speed higher
than the previous one:
 press button 3;
 release it when you have rea
ched the required speed.
To memorise a speed lower than
the previous one:  press button 2;
 release it when you have rea
ched the required speed.
Cancelling the cruise control  place switch 1in the OFF
position or switch off the igni
tion.
29-07-2002
149

CRUISE CONTROL
Cruise control enables the vehicle to
maintain a steady speed pro
grammed by the driver, regardless of
the road characteristics and without
the driver having to touch the accel
erator or brake pedals.
In order for it to be memorised, the
vehicle speed must be greater than
approximately 25 mph (40 km/h) and
fourth or fifth gear must be engaged.
Operation Place switch 1 in the ON position.
A speed can be memorised. Place switch 1 in the OFF position
to cancel.
Memorising a speed
As soon as you reach the chosen
speed, press button 2or 3. This
memorises the speed, which will be
maintained automatically.
Note: It is possible to accelerate
momentarily without disarming the
cruise control. Cancelling the memorised
speed
If you wish to cancel the memorised
speed: 
Press button 4or the brake or
clutch pedal.
Recalling the memorised
speed
After cancellation, press button 4.
Your vehicle will return to the last
memorised speed.
Changing a memorised speed
To memorise a speed higher than
the previous one:  press button 3;
 release it when you have reached
the required speed.
To memorise a speed lower than the
previous one:  press button 2;
 release it when you have reached
the required speed.
Cancelling the cruise control  place switch 1in the OFFposition
or switch off the ignition.
DRIVING YOUR 406 149
Do not use cruise control
on slippery roads or in
heavy traffic. THE ABS
ANTILOCK
BRAKING SYSTEM
When used with approved tyres in
good condition, the ABS increases
the stability and manoeuvrability of
your vehicle, particularly on poor or
slippery road surfaces.
The antilock braking system comes
into operation automatically when
there is a risk of wheel lock.
EMERGENCY BRAKING
ASSISTANCE SYSTEM
In an emergency, this system
enables the optimum braking pres
sure to be reached more quickly,
thus reducing the stopping distance.
It is triggered according to the speed
of activation of the brake pedal. The
effect of this is a reduction in the
resistance of the pedal and an
increase in braking efficiency. The normal operation of the ABS
may make itself felt by slight
vibrations of the brake pedal.
In emergency braking, press
very firmly without releasing
the pressure.
29-07-2002

MAINTENANCE OF YOUR 406
26
1.8 litre 16 V and 2 litre 16 V
petrol engines
1
Power steering.
2 Coolant reservoir. 3
Windscreen and headlamp
wash reservoir.
4 Battery.
5 Air filter. 6
Brake and clutch fluid reservoir.
7 Engine oil filler cap.
8 Dipstick.
29-07-2002

MAINTENANCE OF YOUR 40627
2 litre 16 valve HPI petrol
injection engine
1
Power steering reservoir.
2 Coolant reservoir. 3
Windscreen and headlamp
wash reservoir.
4 Battery.
5 Air filter. 6
Brake and clutch fluid reservoir.
7 Engine oil filler cap.
8 Dipstick.
29-07-2002

MAINTENANCE OF YOUR 406
28
2.2 litre 16 valve petrol engine
1
Power steering reservoir.
2 Coolant reservoir. 3
Windscreen and headlamp
wash reservoir.
4 Battery.
5 Air filter. 6
Brake and clutch fluid reservoir.
7 Engine oil filler cap.
8 Dipstick.
29-07-2002

MAINTENANCE OF YOUR 40629
3 litre 24 valve V6 petrol
injection engine
1
Power steering reservoir.
2 Coolant reservoir. 3
Windscreen and headlamp
wash reservoir.
4 Battery.
5 Air filter. 6
Brake and clutch fluid reservoir.
7 Engine oil filler cap.
8 Dipstick.
29-07-2002

MAINTENANCE OF YOUR 406
30
2 litre turbo diesel HDI engine
(90 bhp
/ 110 bhp)
1 Power steering.
2 Coolant reservoir. 3
Windscreen and headlamp
wash reservoir.
4 Battery.
5 Air filter. 6
Brake and clutch fluid reservoir.
7 Engine oil filler cap.
8 Dipstick.
29-07-2002

MAINTENANCE OF YOUR 40631
2.2 litre 16V turbo diesel HDI
engine
1
Power steering reservoir.
2 Coolant reservoir. 3
Windscreen and headlamp
wash reservoir.
4 Battery.
5 Air filter. 6
Brake and clutch fluid reservoir.
7 Engine oil filler cap.
8 Dipstick.
29-07-2002

29072002
CHECKING THE LEVELS
Engine
Checking the oil level
Check the level regularly and top up
between changes. Maximum con
sumption is 0.5 litres per 600 miles
(1 000 km).
The oil level should be checked with
the vehicle level and the engine cold.There are two marks on
the dipstick:
A= maximum
B = minimum
Oil change: according to the manu
facturer's servicing schedule.
Dipstick. Never fill past the maxi mum mark A.
Oil level gauge on the instrument panel.
Viscosity selection
In all cases, the oil selected must
meet the manufacturer's require
ments.
MAINTENANCE OF YOUR 406
32
Oil filter
Change the filter regularly according
to the servicing schedule.
Used oil
Prevent used oil from coming into
prolonged contact with the skin.
Do not dispose of used oil into drains
or onto the ground.
To maintain the reliability of engines
and emission control systems, the
use of additives in the engine oil is
prohibited.
Brakes and clutch
Checking the brake and clutch
fluid level:
The level should always be above
the DANGER mark on the reser
voir.
If the level drops substantially, con tact a PEUGEOT dealer imme
diately.
Fluid change
must be carried out according to the manufacturer's servicing
schedule.
use fluids approved by the manu facturer, which fulfil DOT 4 stan
dards. Cooling system
Use the fluid approved by the manu
facturer.
When the engine is warm, the tem
perature of the coolant is controlled
by the engine fan. Because this fan
can operate with the ignition key
removed and because the cooling
system is pressurised, wait for at
least one hour after the engine has
stopped before carrying out any
work.
In the event of a breakdown and to
avoid any risk of burns, slacken the
cap to the first notch to release the
pressure. When the pressure has
dropped, remove the cap and top up
the level.

29072002
Engine compartment fuses
Fuse box
To access the fuse box in the engine
compartment (beside the battery),
unclip the cover.
Carefully close the cover when
you have finished.The electrical system of
your vehicle is designed
to operate with standard
or optional equipment.
Before installing other electrical
equipment or accessories on your
vehicle, contact a PEUGEOT
dealer.
Some electrical accessories or
the way in which they are fitted
can have damaging effects on the
operation of your vehicle; the
electronic control circuits, the
audio circuit and the battery
charging circuit.
PEUGEOT will not accept respon
sibility for the cost incurred in
repairing your vehicle or for recti
fying the malfunctions resulting
from the installation of acces
sories not supplied and not rec
ommended by PEUGEOT and not
installed in accordance with its
instructions, in particular where
the equipment in question con
sumes more than 10 mil
liamperes. *The maxifuses provide addition
al protection for the electrical sys
tems. All work must be carried out
by a PEUGEOT dealer.
Fuse N° Rating Functions
1* 10 A Reversing lights– Double injection relay Oil
temperature Oil level Air conditioning compressor.
2* 15 AFuel pump, canister solenoid valve.
3* 10 AControl unit.
4* 10 AEngine control unit and automatic gearbox.
5 10 A Particulate Emission Filter control unit Rear
windscreen relay.
6 15 AFront fog lamps.
7 20 AHeadlamp wash.
8* 20 A Direct petrol injection engine control unit Clutch pedal.
9* 15 ALefthand dipped beam lights.
10* 15 A Righthand dipped beam lights
MAINTENANCE OF YOUR 406
44