turn signal Peugeot 406 2002.5 Owner's Manual

YOUR 406 AT A GLANCE
8
SIDE AIR BAGS
Side air bags are incorporated
into the backs of the front seats,
on the door side.
They are triggered individually,
on whichever side the collision
occurs.
Operating check
This is by means of the warning
light on the instrument panel.
It comes on for 6 seconds when
the ignition is switched on.
If the warning light :
does not come on when the ignition is switched on or,
does not go out after six seconds,
contact a Peugeot dealer.
Passenger air bag precautions
For a vehicle fitted with a disar
ming switch:
disarm the airbag if you ins
tall a rear
facing child
seat.
arm the air bag for an
adult passen
ger.
For a vehicle not fitted with a
disarming switch: do not install rearfacing child seats
on the front passen
ger seat.
Never place your feet or any
object on the fascia.
FRONT AIR BAGS
Disarming the passenger
air bag
 Insert the ignition key in switch
1and turn it:
to the "ON"position, the pas
senger air bag is armed
to the "OFF"position, the pas
senger air bag is disarmed.
Operating check
This symbol lights for approxima
tely six seconds when the igni
tion is switched on.
With the ignition on (2nd notch),
illumination of this warning light
accompanied by an audible signal
and the message "Passenger air
bag disarmed" on the multifunc
tion display indicates that the pas
senger air bag is disarmed (swit
ch in the "OFF"position).
The warning light remains on
throughout the disarming process.
29-07-2002
151

29-07-2002
YOUR 406 IN DETAIL67
Manual station search Press the "MAN" button.
Briefly press button Jor Kto increase or decrease the frequency displayed.
By continuing to press the button in the direction selected, you will obtain contin
uous scrolling of the frequency.
The scrolling stops at the first station found as soon as the button is released.
Pressing the " MAN" button again returns you to automatic station search.
Manual storing of stations in the memory Select the station required.
Press one of the buttons "1" to " 6" for more than two seconds.
The sound stops then becomes audible again, confirming that the station has been stored in the memory.
Automatic storing of FM stations in the memory (autostore) Press button "BND/AST" for more than two seconds, to automatically store the 6 statio ns with the strongest
signal in FM. These stations are stored in the FMast waveband.
If it is not possible to find 6 stations, the remaining me mories are empty.
Recalling stations stored in the memory
For each waveband, briefly press buttons " 1" to " 6" to recall the corresponding station.

29-07-2002
Manual station searchPress the "MAN" button.
Briefly press button Kor Lto increase or decrease the frequency displayed.
By continuing to press the button in the direction selected, you will obtain continuous scrolling of the frequency.
The scrolling stops at the first station found as soon as the button is released.
Pressing the " MAN" button again returns you to automatic station search.
Manual storing of stations in the memory Select the station required.
Press one of the buttons "1" to " 6" for more than two seconds.
The sound stops then becomes audible again, confirming that the station has been stored in the memory.
Automatic storing of FM stations in the memory (autostore) Press button B for more than two seconds, to automatically store the 6 station s with the strongest signal in
FM. These stations are stored in the FMast waveband.
If it is not possible to find 6 stations, the remaining me mories are empty.
Recalling stations stored in the memory
For each waveband, briefly press buttons " 1" to " 6" to recall the corresponding station.
The list of the 6 stations stored in memory on the waveband i s displayed each time one of the buttons "1" to " 6" is pressed.
YOUR 406 IN DETAIL 77

29-07-2002
GENERAL FUNCTIONS
On/offWith the ignition key in the ACCESSORIES or IGNITION position , press button Ato switch the set on or off.
The set can operate for 30 minutes without the vehicle ign ition being switched on.
ANTITHEFT SYSTEM
The audio system is coded in such a way that it can operate on ly on your vehicle. It would not function if fitted to another vehicle.
The antitheft system is automatic and requires no action on your part.
VOLUME SETTING
Adjusting the volume
Turn button Ato increase or decrease the volume of the set.
Note: If you have a telephone fitted with a "mute"signal output connected to the set, the set will automati
cally change to " mute" when the telephone is used.
AUDIO SETTINGS Press the "AUDIO" button several times to access the bass (BASS),treble(TREB), loudness (LOUD), fader
(FAD) , balance (BAL)and the automatic volume correction (CAV).
Exit from audio mode is automatic after a few seconds without p ressing any button, or by pressing the
" AUDIO " button after configuration of the automatic volume correction .
Note: the bass and treble settings are specific to each source. It is p ossible to set them differently for radio,
CD, or CD changer.
YOUR 406 IN DETAIL
86

29-07-2002
Manual station searchPress the "MAN"button.
Briefly press button Kor Lto increase or decrease the frequency displayed.
By continuing to press the button in the direction selected, you will obtain continuous scrolling of the frequency.
The scrolling stops at the first station found as soon as the button is released.
Pressing the "MAN"button again returns you to automatic station search.
Manual storing of stations in the memory Select the station required.
Press one of the buttons "1"to "6" for more than two seconds.
The sound stops then becomes audible again, confirming that the station has been stored in the memory.
Automatic storing of FM stations in the memory (autostore) Press buttonBfor more than two seconds, to automatically store the 6 station s with the strongest signal in
FM. These stations are stored in the FM3 waveband.
If it is not possible to find 6 stations, the remaining me mories are empty.
Recalling stations stored in the memory
For each waveband, briefly press buttons "1"to "6" to recall the corresponding station.
YOUR 406 IN DETAIL 89

29-07-2002
YOUR 406 IN DETAIL
106
Changing the battery of the
remote control
The information 'battery flat' is
given by an audible signal accompa
nied by a message on the multi
function display.
To replace the battery, unclip the
casing using a coin at the ring
(CR2016/3 volt battery).
If the remote control does not work
after the battery has been changed,
reprogramme the remote control.
Confidential card
The confidential card contains the
identification code necessary for any
work carried out by a PEUGEOT
dealer on the system. This code is
hidden by a film, which should be
removed only if necessary.
Keep your card in a safe place,
never inside the vehicle.
Programming the remote
control Switch off the ignition.
 Switch the ignition on again.
 press button A.
 Switch off the ignition and
remove the remote control key
from the ignition lock. The remote
control is now working again.
DEADLOCKING
Deadlocking the doors is an addtional
safety device.
Warning:
The internal and external door
controls cannot operate when the vehi
cle is deadlocked.
There are two methods of operation:
With the the remote control
To deadlock: pressbutton A.
This is indicated by permanent lighting
of the direction indicators for approxi
mately two seconds.
Press button A within five seconds
of deadlocking to change this to lock
ing only.
This is indicated by permanent lighting
of the direction indicators for approxi
mately two seconds.
With the ignition key from the driver's
door
To deadlock: turn the key towards the
rear of the vehicle.
To lock: within five seconds of deadlock
ing, again turn the key towards the rear
of the vehicle. To unlock: turn the key
towards the front of the vehicle.
Do not operate the dead
locking if there is someone
inside the vehicle.
Do not operate the buttons
of yur remote control while it is in
your pocket, as there is a possibility
that it may unlock your vehicle.

29-07-2002
Operating check
This is confirmed by an indi
cator light, accompanied
by an audible signal and a
message on the multifunction dis
play.
With the ignition on (2nd notch), illu
mination of this warning light accom
panied by an audible signal and the
message "Passenger air bag dis
armed" on the multifunction display,
indicates that the passenger air bag
is disarmed (switch in the "OFF"
position).
DRIVING YOUR 406
152
Disarming the passenger
air bag*
To ensure the safety of your child,
it is essential to disarm the pas
senger air bag when you install a
rearfacing child seat on the front
passenger seat. With the ignition switched off, insert
the key into the passenger air bag
disarming switch 1, turn it to the
"OFF" position, then remove the
key keeping the slot in this position.
The air bag warning light on the
instrument panel is lit throughout the
disarming process.
In the "OFF" position, the passenger
air bag will not be triggered in the
event of an impact.
As soon as the child seat is removed,
turn the air bag slot to the "ON"posi
tion to reactivate the air bag and
thus ensure the safety of your pas
senger in the event of an impact.
* According to destination. SIDE AIR BAGS
The side air bags are incorporated
into the backs of the front seats, on
the door side.
They are deployed independently of
each other, on whichever side the
collision occurs.
Operating check
This is confirmed by an indicator
light, accompanied by an audible
signal and a message on the multi
function display.
If this indicator light comes
on, accompanied by an
audible signal and the mes
sage "Air bag fault" on
the multifunction display,
contact a PEUGEOT dealer to have
the system checked.

29-07-2002
Operating check
This is confirmed by an indi
cator light, accompanied
by an audible signal and a
message on the multifunction dis
play.
With the ignition on (2nd notch), illu
mination of this warning light accom
panied by an audible signal and the
message "Passenger air bag dis
armed" on the multifunction display,
indicates that the passenger air bag
is disarmed (switch in the "OFF"
position).
DRIVING YOUR 406
152
Disarming the passenger
air bag*
To ensure the safety of your child,
it is essential to disarm the pas
senger air bag when you install a
rearfacing child seat on the front
passenger seat. With the ignition switched off, insert
the key into the passenger air bag
disarming switch 1, turn it to the
"OFF" position, then remove the
key keeping the slot in this position.
The air bag warning light on the
instrument panel is lit throughout the
disarming process.
In the "OFF" position, the passenger
air bag will not be triggered in the
event of an impact.
As soon as the child seat is removed,
turn the air bag slot to the "ON"posi
tion to reactivate the air bag and
thus ensure the safety of your pas
senger in the event of an impact.
* According to destination. SIDE AIR BAGS
The side air bags are incorporated
into the backs of the front seats, on
the door side.
They are deployed independently of
each other, on whichever side the
collision occurs.
Operating check
This is confirmed by an indicator
light, accompanied by an audible
signal and a message on the multi
function display.
If this indicator light comes
on, accompanied by an
audible signal and the mes
sage "Air bag fault" on
the multifunction display,
contact a PEUGEOT dealer to have
the system checked.