audio Peugeot 406 C 2002 Owner's Manual

YOUR 406 COUPE IN DETAIL
52
Stalk movement Functionion
1
Ð Press (behind) Increase volume.
2 Ð Press (behind) Decrease volume.
1+2 Ð Simultaneous press Cutting off of the sound (mute); restoring of the sound
by pressing any button.
3 Ð Press Automatic search of upper frequencies (radio) -
Selection of the following track (CD).
4 Ð Press Automatic search of lower frequencies (radio) -
Selection of the previous track (CD).
5 Ð Press the end Change of source (radio/cassette/CD changer).
6 Ð Rotation Selection of next memorised station (radio) -
(clockwise) Selection of following CD.
7Ð Rotation Selection of previous memorised station (radio) -
(anti-clockwise) Selection of previous CD.
AUDIO RM2
01-07-2002

YOUR 406 COUPE IN DETAIL53
Button
Function
A ON/VOL Radio On/Off . Volume adjustment.
B Radio selection. Selection of FM1, FM2, FMast and AM wavebands. Press for more than 2 seconds: automatic storing of stations in the memory (autostore).
C Cassette selection. Reversal of the direction of play of the cassette.Press for more than 2 seconds: noise reduction.
D CD changer selection.
Press for more than 2 seconds: shuffle.
E
Ejection of the cassette.
FT ATraffic information priority on/off.
Press for more than 2 seconds: PTY function on/off.
G RDS RDS function on/off.
Press for more than 2 seconds: regional following mode on/off.
H Increase bass/treble setting.
I Decrease bass/treble setting.
J AUDIO Adjustment of bass, treble, loudness, sound distribution and automatic volume correction.
K
kkkkAutomatic search of higher frequency. Selection of following track - cassette and CD.
L MAN Manual/automatic operation of buttons Kand Min radio mode.
M
jjjjAutomatic search of lower frequency. Selection of previous track - cassette and CD.
1 to 6 12 34 56 Selection of station stored in the memory.
Press for more than 2 seconds: storing of a station in the memory.
Selection of a disc in the CD changer.
01-07-2002

GENERAL FUNCTIONS On/offWith the ignition key in the ACCESSORIES or IGNITION position, press button Ato switch the set on or off.
The set can operate for 30 minutes without the vehicle ignition being switched on.
Anti-theft systemThe audio system is coded in such a way that it can operate only on your vehicle. It would not function if fitted to another vehicle. The anti-theft system is automatic and requires no action on your part.
ADJUSTING THE VOLUME Turn button Ato increase or decrease the volume.
AUDIO SETTINGS Press the "AUDIO" button several times in succession to access the bass (BASS), treble(TREB), loudness
(LOUD), fader(FAD) , balance (BAL)and the automatic volume correction.
Exit from audio mode is automatic after a few seconds without pressing any button, or by pressing the " AUDIO " button after configuration of the automatic volume correction.
Note: bass and treble settings are specific to each source. It is possible to set them differently for radio, cas-
sette and CD changer.
YOUR 406 COUPE IN DETAIL
54
01-07-2002

AUDIO SYSTEM (RM2) Presentation
Your 406 CoupŽ is fitted with a JBL Audio Hi-Fi system, designed specifically for the vehicle's passenger compartment.
At the heart of the system, a 240 Watt multifunction amplifier (1), located in the boot, independently controls 10 high acoustic definition speakers. These speakers make it possible to obtain optimum reproduction and distribution of the sound in the vehicle, in the
front and in the rear. The speakers are located:
- in the fascia: two Micro Tweeters (3) fitted in two Mediums (4) for clear and head-on reproduction of the sound, favour-
ing listening in the front.
- in the front doors: two Woofers (5)for reproduction of the bass (low frequencies) in the front.
- in the passenger pillars: two Tweeters (2)for reproduction of the treble (high frequencies) in the rear.
- on the rear shelf: two Subwoofers (6)for reproduction of the extreme bass sounds (low and very low frequencies) through-
out the passenger compartment; you will appreciate the impact and depth, noticing that the sound fills the vehicle
perfectly.
Adjustment in CD mode The basic functions remain those of the audio equipment.
No additional adjustment is required. However, to benefit fully from your
JBL audio system, you are advised to adjust the AUDIO functions (BASS,
TREB, FAD, BAL) to position " 0 " (zero) and the Loudness (LOUD)to the
" ON " position.
YOUR 406 COUPE IN DETAIL 63
01-07-2002

YOUR 406 COUPE IN DETAIL
64
Stalk movement Function
1
Ð Press (behind) Increase volume.
2Ð Press (behind) Decrease volume.
1+2 Ð Simultaneous pressCutting off of the sound (mute); restoring of the sound by pressing any button.
3Ð Press Automatic search of upper frequencies (radio) -
Selection of the following track (CD).
4Ð Press utomatic search of lower frequencies (radio) -
Selection of the previous track (CD).
5Ð Press the end Change of source (radio/CD changer).
6Ð Rotation Selection of next memorised station (radio) -
(clockwise) Selection of following CD.
7Ð Rotation Selection of previous memorised station (radio) -
(anti-clockwise) Selection of previous CD.
AUDIO RD3
01-07-2002

ButtonFunction
A ON/VOLRadio On/Off. Volume adjustment.
BRadio selection. Selection of FM1, FM2, FMast and AM wavebands. Press for more than 2 seconds: automatic storing of stations in the memory (autostore).
CCD selection.
Press for more than 2 seconds: shuffle.
DCD changer selection.
Press for more than 2 seconds: shuffle.
EEjection of the CD.
FT ATraffic information priority on/off.
Press for more than 2 seconds: PTY function on/off.
G RDSRDS function on/off.
Press for more than 2 seconds: regional following mode on/off.
HIncrease bass/treble setting.
IDecrease bass/treble setting.
J AUDIOSelection of bass, treble, loudness, sound distribution and automatic volume correction.
K kkkkAutomatic search of higher frequency. Selection of following CD track.
L MANManual/automatic operation of buttons
K and M in radio mode.
M jjjjAutomatic search of lower frequency. Selection of previous CD track.
1 to 6 12 34 56Selection of station stored in the memory.
Press for more than 2 seconds: storing of a station in the memory.
Selection of a disc in the CD changer.
YOUR 406 COUPE IN DETAIL 65
01-07-2002

GENERAL FUNCTIONS On/offWith the ignition key in the ACCESSORIES or IGNITION position, press button Ato switch the set on or
off.The set can operate for 30 minutes without the vehicle ignition being switched on.
ANTI-THEFT SYSTEMThe audio system is coded in such a way that it can operate only on your vehicle. It would not function if fitted to another vehicle. The anti-theft system is automatic and requires no action on your part. ADJUSTING THE VOLUME Turn button Ato increase or decrease the volume of the set.
Note: If you have a telephone fitted with a "mute"signal output connected to the set, the set will automatically
change to "mute"when the telephone is used.
AUDIO SETTINGS Press the "AUDIO" button several times in succession to access the bass (BASS), treble(TREB), loudness
(LOUD), fader(FAD) , balance (BAL)and the automatic volume correction.
Exit from audio mode is automatic after a few seconds without pressing any button, or by pressing the " AUDIO " button after configuration of the automatic volume correction.
Note: the bass and treble settings are specific to each source. It is possible to set them differently for radio,
CD, or CD changer.
YOUR 406 COUPE IN DETAIL
66
01-07-2002

MAINTENANCE OF YOUR 406 COUPE37
CHANGING A FUSE The fuse boxes are under the fascia and in the engine compartment. Fascia fuse box Undo the three screws a quarter turn with a coin.Pull switch
Aand tilt the cover to
access the fuses. Removing and changing a fuse Before changing a fuse you must find out the cause of the fault and have it put
right. The fuse numbers are indicated on the fuse box. Use the special pliers
Aattached to the box.
Always change a faulty fuse for one of the same rating.
Correct Incorrect Pliers AFuse no. Rating FunctionsA 20 A
Locking/Unlocking..
B 10 A Rear fog lamps.
C 40 A Demisting the mirrors.
D - Not used. E 30 A Electric windows.
F 15 A Supply to instrument panel -
Display - Audio equipment -
Satellite navigation system - Airconditioning.
01-07-2002
Remove the instrument panel lower trim to access the built-in systems interface.

MAINTENANCE OF YOUR 406 COUPE
40
Engine compartment fuses Fuse box
To access the fuse box in the engine compartment (beside the battery),
unclip the cover. Carefully close the cover when you have finished.The electrical system of your vehicle is designedto operate with standardor optional equipment.
Before installing other electricalequipment or accessories on yourvehicle, contact a PEUGEOT dea-
ler. Some electrical accessories or the way in which they are fitted canhave damaging effects on theoperation of your vehicle; theelectronic control circuits, theaudio circuit and the battery char-ging circuit. PEUGEOT will not accept respon- sibility for the cost incurred inrepairing your vehicle or for recti-fying malfunctions resulting fromthe installation of accessories notsupplied and not recommendedby PEUGEOT and not installed inaccordance with its instructions, inparticular where the equipment inquestion consumes more than 10milliamperes. * The maxi-fuses provide additio- nal protection for the electrical
systems. All work must be carried
out by a PEUGEOT dealer.
Fuse N¡ Rating Functions
1* 10 A
Reversing lights - Double injection relay - Engine oil
temperature - Oil level - Air conditioning compressor.
2* 15 AFuel pump - Canister solenoid valve.
3* 10 A Control unit.
4* 10 A Engine control unit and automatic gearbox.
5 10 A Particulate emission filter control unit.
6 15 A Front fog lamps.
7 20 A Headlamp wash.
8* 20 A Direct injection petrol engine control unit - Clutchpedal.
9* 15 A Left-hand dipped beam.
10* 15 A Right-hand dipped beam.
01-07-2002

MAINTENANCE OF YOUR 406 COUPE37
CHANGING A FUSE The fuse boxes are under the fascia and in the engine compartment. Fascia fuse box Undo the three screws a quarter turn with a coin.Pull switch
Aand tilt the cover to
access the fuses. Removing and changing a fuse Before changing a fuse you must find out the cause of the fault and have it put
right. The fuse numbers are indicated on the fuse box. Use the special pliers
Aattached to the box.
Always change a faulty fuse for one of the same rating.
Correct Incorrect Pliers AFuse no. Rating FunctionsA 20 A
Locking/Unlocking..
B 10 A Rear fog lamps.
C 40 A Demisting the mirrors.
D - Not used. E 30 A Electric windows.
F 15 A Supply to instrument panel -
Display - Audio equipment -
Satellite navigation system - Airconditioning.
01-07-2002
Remove the instrument panel lower trim to access the built-in systems interface.