brake Peugeot 406 C 2003 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2003, Model line: 406 C, Model: Peugeot 406 C 2003Pages: 141, PDF Size: 1.99 MB
Page 3 of 141
24-03-2003
12 -Windscreen wash-wipe stalk. Trip computer stalk.
13 - Radio remote control stalk.
14 - Steering lock and ignition.
15 - Electric mirror controls.Window controls.
16 - Electronic stability control switch (ASR/ESP).
17 - Headlamp height adjustment.
18 - Fuse box.
19 - Steering wheel adjustment.
20 - Cruise control.
21 - Rear ashtray. 22 -
Cup-holder.
23 - Handbrake.
24 - Heated seat switches. Coin storage.Passenger airbag disarming switch. Alarm button.
25 - Lighter.
26 - Rear footwell heating vent.
27 - Front ashtray.
28 - Gear lever.
29 - Radio.
30 - Heating/ventilation controls.
31 - Multifunction display.
YOUR 406 COUPE AT A GLANCE
3
1 - Speaker (tweeter) location.
2 - Window demisting vent.
3 - Side adjustable heating/ ventilation vents and air flowregulation.
4 - Glove box.
5 - Passenger airbag.
6 - Windscreen demistingvents.
7 - Central adjustable heating/ventilation vents and air flowregulation.
8 - Hazard warning lightsswitch.
9 - Lights and direction indicators stalk.
10 - Instrument dials.
11 - Driver's airbag. Horn.
Page 12 of 141
24-03-2003
Starting With the engine running, to start the vehicle from position P:
☞ press the brake pedal to change out of position P (shift lock),
☞ select the required position ( R, D , 3 , 2 or 1) then gradually release the brake pedal ; the vehicle moves off auto-
matically.
Y ou can also start from position N:
☞ release the handbrake, keeping your foot on the brake,
☞ select the required position ( R, D , 3 , 2 or 1) then gradually release the brake pedal ; the vehicle moves off auto-
matically.
The four speed automatic gearbox offers a choice between the comfort of integral automatic operation,
enhanced by a sport programme (switch A) and a snow programme (switch B).
Gear selection gate ☞ Move the lever in the gate to select a position.
Once the position has been selected, the corresponding indicator light illuminates on the instrument panel display.
P ark: for immobilising the vehicle and for starting the engine , with the handbrake on or off.
R everse: for reversing (select this position with the vehicle stationary, engine at idle).
N eutral: for starting the engine and for parking , with the handbrake on.
D rive: for driving in autoadaptive mode (automatic changing of the four gears).
3: for urban driving or for driving on winding roads(automatic changing of the first three gears only).
2: for driving on mountain roads or for towing a trailer (automatic changing of the first two gears only).
1: for tackling steep gradients (selection of first gear only).
Special feature of the gearbox (2 litre engine). Selection of first gear is by press- ing switch Cwith the selector
lever in position 2.
To change out of first gear, press
switch Cagain or move
the gear lever.
THE AUTOMATIC AUTOADAPTIVE GEARBOX
2 litre engine
YOUR 406 COUPE AT A GLANCE
12
V6 engine
124
Page 13 of 141
24-03-2003
CRUISE CONTROL Cruise control makes it possible to maintain a steady speed programmed
by the driver, regardless of the road characteristics and without the driverhaving to touch the accelerator or brake pedals. In order to be memorised, the vehicle speed must be greater than 25 mph (40 km/h) or 37 mph (60 km/h), depending on the engine, with at least 4thgear engaged (2nd gear for the automatic gearbox). Operation☞ Place knob 1in the ONposition.
A speed can now be memorised.
☞ Place knob 1in the OFFposition to deactivate the system.
Memorising a speed When you reach the required speed, press button 4. The speed is mem-
orised and will be maintained automatically.Note: it is possible to accelerate temporarily without deactivating the
cruise control. Deactivating the memorised speed If you wish to deactivate the memorised speed:
☞ press button 4or the brake or clutch pedal.
Recalling the memorised speedFollowing deactivation, press button 4. Your vehicle resumes
the last memorised speed. Do not use the cruise control on slippery roadsor in heavy traffic.
YOUR 406 COUPE AT A GLANCE
13
127
Modifying a memorised speed
To
memorise a speed greater
than the previous one:
☞ press button 3;
☞ release it when you have reached the required speed.
To memorise a speed lower than
the previous one:
☞ press button 2;
☞ release it when you reach therequired speed.
Switching off the cruise control ☞ Place knob 1in the OFFposi-
tion or switch off the ignition.
Page 16 of 141
24-03-2003
SPECIAL FEATURES Some of your vehicle's vital components have specific servicing schedules.The air bags and the pretensioning seat beltsmust be replaced every 10 years.
The brake fluid must be replaced every 36/40,000 miles (60 000 km) or every 2 years.
The passenger compartment filter must be checked at each visit to the PEUGEOT dealer (intermediate visists and regu-
lar services).Replacement of the timing belt: consult your PEUGEOT dealer.
MAINTENANCE OF YOUR 406 COUPE 19
Arduous condition of use If the vehicle is used in certain particularly arduous conditions:
Page 17 of 141
24-03-2003
SPECIAL FEATURES Some of your vehicle's vital components have specific servicing schedules.The air bags and the pretensioning seat beltsmust be replaced every 10 years.
The brake fluid must be replaced every 36/40,000 miles (60 000 km) or every 2 years.
The passenger compartment filter must be checked at each visit to the PEUGEOT dealer (intermediate visists and regu-
lar services).Replacement of the timing belt: consult your PEUGEOT dealer.
MAINTENANCE OF YOUR 406 COUPE 19
Arduous condition of use If the vehicle is used in certain particularly arduous conditions: