ignition Peugeot 407 C Dag 2008 Workshop Manual

11
22
33
11
22
5511
04
165
HANDS-FREE KIT
DISPLAY C
For safety reasons and because they require prolonged attention on the part of the driver, the operations for matching of the Bluetooth mobile telephone with the WIP Sound hands-free kit must be carried out with the vehicle stationary and the ignition on.
Enter the vehicle's authentication code (=1234). Depending on the telephone, you may be asked to enter this code before the superimposed confi guration display appears.
Activate the telephone's Bluetooth function and carry out a search of the Bluetooth accessories present for the telephone.
Select the accessory which corresponds to the name of the vehicle, a superimposed confi guration display appears on the multifunction display.
The services offered by the hands-free kit depend on the telephone network, the SIM card and the compatibility of the Bluetooth equipment used. Consult your telephone's manual and your operator to check which services are available to you. A list of mobile telephones which offer the best range of services is available from the network. Consult a PEUGEOT dealer.
RECEIVING A CALL
Select the YES tab on the display using the buttons then confi rm by pressing OK.
An incoming call is announced by a ring and a supe rimposed display on the multifunction display.
YES
YES
Select the YES tab on the display using the buttons and confi rm by pressing OK.
Press the end of the steering wheel stalk to accept the call.
Press the end of the steering wheel stalk for more than two seconds to access your directory.
If you wish to dial a number, use the keypad on yo ur telephone.
MAKING A CALL
MATCHING A TELEPHONE