lumbar support Peugeot 508 2012 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2012, Model line: 508, Model: Peugeot 508 2012Pages: 340, PDF Size: 11.11 MB
Page 66 of 340
64
Comfort
Front seats
1.Adjustments to the height and angle of
t
he head restraint
To raise it, pull upwards.
To lower it, hold the button in and press on
the head restraint
(pushing to go past the
stiff point of the button
).
2.Adjustment of the backrest angle
Operate the control lever and adjust the
position of the backrest to the front or to
th
e rear.
3.Adjustment of the seat height
Raise or lower the control lever the number
of times required to obtain the desired
position.
4.Adjustment of the lumbar support
This system allows the height and depth
o
f the lumbar suppor t to be adjusted
separatel
y.
)Forwards or backwards to increase or
decrease the lumbar support.
)Upwards or downwards to raise or lower
th
e lumbar contact zone.
5.Forwards-backwards adjustment of the
seat
position
Lift th
e control bar and slide the seat
forwards or backwards.
6. Ad
justing the cushion
Pull the handle to adjust the length of
th
e cushion.
Page 67 of 340
3
65
i
Comfort
Electric adjustments
Switch on the ignition or start the engine if the vehicle has gone into economy mode.1
.Adjustment of the seat cushion angleand height, and forwards-backwards
adjustment )Raise or lower the front of the control
to adjust the seat cushion angle. )Raise or lower the rear of the control
to raise or lower the seat. )Simultaneously raise or lower the frontand rear of the control in order to raise or
lower the entire seat. 2.Adjustment of the backrest angle
Move the control forwards or backwards
to adjust the backrest angle.3. Adjustment of lumbar support This function allows you to independently
adjust the height and level of lumbar support.
The electric functions of the driver's seat are active for about a minute after opening the
front door. They are deactivated about a minute after switching off the ignition and ineconomy mode.To reactivate them, switch on the ignition.
M
ove the control: )
Forwards or backwards to increase or
reduce the lumbar suppor t.
) Upwards or downwards to raise or lower
the lumbar suppor t zone.