belt PEUGEOT 508 2023 Owner's Manual

130
Driving
Operating conditions and
limits
Vehicle moving forward without trailer.
Brake system operational.
ASR system activated.
Seat belts fastened for all passengers.
Stabilised speed on roads with no or low
curvature.
This warning lamp lights up on the instrument panel without any additional
message, to indicate that the automatic braking
system is not available.
This is a normal behavior indicating that a
condition is not fulfilled and which does not
request the support of a workshop.
In any situations with ignition on where automatic
braking presents a risk, deactivating the system
via the driving aids touch screen application is
recommended, for instance:
–

T

owing a trailer (particularly a trailer without its
own braking system).
–

Carrying long objects on roof bars.
–


Driving with snow chains.
–


Using an automatic car wash.
–


Performing any maintenance (e.g.
changing a
wheel, working inside the engine compartment).
–

Placing the vehicle on a rolling bench in a
workshop.
–


T

owing the vehicle.
–

Following a damage of the windscreen close
to the detection camera.
The system is automatically deactivated when the use of certain types of
"space-saver" spare wheel (smaller diameter)
is detected, or if a fault with the brake pedal
switch or at least two brake lamps is detected.
Following a severe crash (e.g.
with airbag
deployment), the system is automatically
deactivated.
Have it checked by a PEUGEOT dealer or a
qualified workshop.
In case the detection is degraded or
temporarily unavailable by environment
conditions, then a driver indication is not
displayed (because a driver action is not
requested).
It can be dangerous to drive if the brake
lamps are not in perfect working order.
The driver must not overload the vehicle (keep within the GVW limit and load
height limits for roof bars).
Collision Risk Alert
This function warns the driver if there is a risk
of collision with the preceding vehicle, or with a
pedestrian or cyclist.
Modifying the alert trigger threshold
The trigger threshold determines the sensitivity
with which the function warns of the risk of
collision.
► In the ADAS touch screen application,
select Functions>Automatic Braking
System .
►

Select one of the 3 preset
thresholds:

"Far", "Medium" or "Near".
The selected threshold is memorised when the
ignition is switched off.
Operation
Depending on the collision risk detected by the
system and the alert trigger threshold chosen
by the driver, different levels of alert may be
triggered and displayed on the instrument panel.
The system takes into account the vehicle
dynamics, the difference speed of the own
vehicle and the object identified for the
collision risk, and the operation of the vehicle
(e.g.
actions on the pedals, steering wheel) to
trigger the alert at the most relevant moment.
(orange)
Level 1: visual alert only, warning that the
preceding vehicle is very close.
The message "Vehicle close" is displayed.
(red)
Level 2: visual and audible alert, warning
that a collision is imminent.
The message "Brake! " is displayed.
Level 3: a micro-braking may be given,
confirming the risk of collision (optional).

132
Driving
The brake pedal may feel hard and vibrate slightly while the function is
operating.
If the vehicle comes to a complete stop,
automatic braking is maintained for 1 to
2

seconds.
Deactivation/Activation
By default, the system is automatically activated
at every engine start.
It is configured in the ADAS touch screen
application.
Deactivation of the system is signalled by
the illumination of this warning lamp,
accompanied by the display of a message.
The system cannot be deactivated above 10 km/h.
Malfunction
This warning lamp lights up on the instrument panel with the message
"Driving Assistance Sensor blind: Clean
sensor, see User Manual" if the sensor is
masked.
This is a normal behavior, which does not
request the support of a qualified workshop.
In this case, stop the vehicle and verify if the
front camera or the front radar is covered by dirt,
mud, sand, snow, ice or anything preventing the
sensing.
The system is operational again after the
detection field has been cleaned.
In the event of a malfunction, this warning
lamp lights up on the instrument panel,
accompanied by the display of a message and
an audible signal.
Have it checked by a PEUGEOT dealer or a
qualified workshop.
If these warning lamps come on
after the engine has been switched
off and then restarted, contact a PEUGEOT
dealer or a qualified workshop to have the
system checked.
These warning lamps light up on the instrument panel and/or in the
warning lamp display for seat belts and front
passenger airbag to indicate that the driver's
and/or front passenger's seat belt is not fastened
(depending on version). The automatic braking
system is deactivated until the seat belts are
fastened.
Distraction detection
For more information, refer to the
General recommendations on the use
of driving and manoeuvring aids .
The function comprises the "Driver Attention
Warning" system combined with the "Driver
Attention Warning by Camera" system.
These systems are in no way designed to keep the driver awake or to prevent
the driver from falling asleep at the wheel.
It is the driver’s responsibility to stop if feeling
tired.
Take a break if you are feeling tired or at least
every 2 hours.
Driver Attention Warning
The system triggers an alert when it detects that the driver has not taken a
break after two hours of driving at a speed above
43 mph (70
km/h).
This alert is issued via the display of a message
encouraging the driver to take a break,
accompanied by an audible signal.
If the driver does not follow this advice, the alert
is repeated hourly until the vehicle is stopped.
The system resets itself if one of the following
conditions is met:
–

With the engine running, the vehicle has been
stationary for more than 15 minutes.
–


The ignition has been switched off for a few
minutes.
–


The driver's seat belt is unfastened and their
door is opened.
As soon as the speed of the vehicle drops below 43 mph (70 km/h), the
system goes into standby.
Driving time starts being counted again once
the speed reaches above 43
mph (70 km/h).

183
In the event of a breakdown
8Accessing the battery
The battery is located under the bonnet.

For access to the (+) terminal:
► Release the bonnet by pulling the internal
release lever
, then the external safety catch.
►

Raise the bonnet.
(+)

Positive terminal with a quick-release
terminal.
(-) Negative terminal.
As the battery's negative terminal is not
accessible, a remote earth point is located near
the battery.
Starting using another battery
If the vehicle's battery is flat, the engine can be
started using a backup battery (either external or
from another vehicle) and jump leads or using a
battery booster.
Never start the engine by connecting a
battery charger.
Never use a 24
V or higher battery booster.
Check beforehand that the backup battery
has a nominal voltage of 12
V and a capacity
at least equal to that of the discharged
battery.
The two vehicles must not be in contact with
each other.
Switch off all electricity-consuming equipment
on both vehicles (audio system, wipers,
lighting, etc.).
Make sure that the jump leads are well away
from the engine’s moving parts (fan, belt,
etc.).
Do not disconnect the (+) terminal while the
engine is running.


► Lift the plastic cover on the (+) terminal, if the
vehicle has one.
►

Connect the red cable to the (+) terminal of
flat battery

A (at the metal elbow), then to the
(+) terminal of the backup battery B or of the
booster .
►

Connect one end of the green or black cable
to the (-) terminal of the backup battery

B or of
the booster (or to an earth point on the assisting
vehicle).
►

Connect the other end of the green or black
cable to the earth point


C
.
►

Start the engine on the assisting vehicle and
leave it running for a few minutes.
►


Operate the starter on the broken down
vehicle and let the engine run.
If the engine does not start immediately

, switch
off the ignition and wait a few moments before
trying again.
►

W
ait for it to return to idle.
►

Disconnect the jump leads in reverse order.
►


Refit the plastic cover to the (+) terminal, if
the vehicle has one.
►


Allow the engine to run for at least
30

minutes, with the vehicle stationary, so that
the battery reaches an adequate state of charge.
Driving immediately without having
reached a sufficient level of charge may
affect some of the vehicle's functions (e.g.
Stop & Start).
Charging the battery using a battery
charger
For optimum service life of the battery, it is
essential to maintain an adequate state of
charge.

212
Vehicle data recording and privacy
Vehicle data recording
and privacy
Electronic control units are installed in your
vehicle. These control units process data
received from the vehicle's sensors, for example,
or data they generate themselves or exchange
with each other. Some of these control units are
required for the correct operation of your vehicle,
some others assist you while driving (driving or
manoeuvring aids), while others provide comfort
or infotainment functions.
The following contains general information about
how data is processed within the vehicle.
You will find additional information about the
specific data which is downloaded, stored
and transmitted to third parties and what it is
used for in your vehicle under the keyword
"Data protection". This information is directly
associated with the references for the functions
in question contained in the corresponding
vehicle handbook, or in the general terms and
conditions of sale.
This information is also available online.
Vehicle operating data
The control units process the data used for the
operation of the vehicle.
This data includes, for example:
–
Information about the state of the vehicle
(e.g.

speed, travel time, lateral acceleration,
wheel rotation rate, fastened seat belts display). –

Environmental conditions (e.g.
temperature,
rain sensor, distance sensor).
As a general rule, this data is temporary, is
not stored for longer than one operating cycle
and is only used within the vehicle itself. The
control units often record this data (including the
vehicle's key). This function allows either the
temporary or permanent storage of information
about the state of the vehicle, stresses on
components, servicing requirements, as well as
events and technical errors.
Depending on the vehicle's equipment level, the
data stored is as follows:
–
Operating state of system components
(e.g.
filling level, tyre pressures, battery charge
status).
–
Faults and malfunctions in important system
components (e.g.
lamps, brakes).
–
System reactions in specific driving situations
(e.g.
deployment of an airbag, triggering of
stability control and braking systems).
–
Information about events which have
damaged the vehicle.
–

For electric and rechargeable hybrid vehicles,
the traction battery charge level and the
estimated driving range.
In particular circumstances (e.g.
if the vehicle
has detected a malfunction), it may be necessary
to record data which would otherwise simply not
be stored.
When taking your vehicle in for servicing
(e.g.
repairs, maintenance), the stored operating
data may be read along with the vehicle's identification number and used if necessary.
The personnel working for the servicing network
(e.g.
garages, manufacturers) or third parties
(e.g. roadside assistance agents) may read
the vehicle's data. This also applies to work
carried out under warranty and quality assurance
measures.
This data is generally read via the OBD
(On-Board Diagnostics) port fitted by law to
the vehicle. It is used to report on the technical
state of the vehicle or its components and
facilitates the diagnosis of malfunctions, in
compliance with warranty obligations and for
quality improvement. This data, in particular the
information relating to stress on components,
technical events, operator errors and other
malfunctions, is sent to the Manufacturer, if
necessary, along with the vehicle's identification
number. The Manufacturer's liability may also be
engaged. The Manufacturer may also use the
operating data taken from the vehicle for product
recalls. This data may also be used to check the
customer's warranty and any claims made under
warranty.
Any malfunctions stored in the vehicle may be
reset by an after-sales service company during
servicing or repair work, or at your request.

219
Alphabetical index
Oil change 164
Oil consumption
164
Oil, engine

164
On-board tools

65, 172–174
Opening the bonnet

162–163
Opening the boot

28, 35
Opening the doors

28, 34
P
Pads, brake 166
Paint
170, 195
Paint colour code

195
Parcel shelf, rear

61
Parking brake, electric

101–103, 166
Parking (sensors)

138
Parking sensors, audible and visual

138
Parking sensors, front

139
Parking sensors, rear

138
Parking sensors, side

139
Passenger compartment temperature pre-
conditioning (Rechargeable hybrid)

25, 55
Pedestrian horn (Rechargeable hybrid)

78
Personalisation

10
Peugeot Matrix LED Technology

67, 69
Plates, identification

195
Port, USB

56, 60
Power

21
Power indicator (Rechargeable hybrid)

9, 21
Pressures, tyres

167, 174, 176, 195
Pre-tensioning (seat belts)

84
Priming the fuel system 172
Profiles
197
Programmable cruise control

120
Protecting children

85, 88–92
Puncture

174, 176
R
Radar (warnings) 11 2
Radio
206–207
Range, AdBlue®

19, 165
Reading lamps, touch-sensitive

59–60
READY (warning lamp)

162
Rear bench seat

49
Rear screen (demisting)

55
Rechargeable hybrid engine

9, 24, 161–162, 188, 193
Rechargeable hybrid system

6, 9, 24,
99, 107, 147
Recharging the battery

182–183, 186
Recharging the traction battery

151
Recharging the traction battery (Rechargeable
hybrid)

147, 155–157
Recirculation, air

53–54
Recorder, trip distance

22
Reduction of electrical load (mode)

162
Regeneration of the particle filter

166
Regenerative braking (deceleration
by engine braking)

104
Reinitialising the remote control

32
Reinitialising the under-inflation detection
system
111
Reminder, lighting on

66
Remote control

26–30
Remote functions

157
Remotely operable functions (
Rechargeable hybrid)

25, 55
Removing a wheel

178–179
Removing the mat

59
Replacing bulbs

180–181
Replacing fuses

182
Replacing the air filter

166
Replacing the oil filter

166
Replacing the passenger compartment
filter

166
Reservoir, screenwash

165
Resetting the trip

22
Reversing camera

113, 140–141
Reversing lamps

181
Road sign recognition

11 4
Roof bars

159–160
Running out of fuel (Diesel)

172
S
Safety, children 85, 88–91
Saturation of the particle filter (Diesel)
166
Screen, cold climate

161
Screenwash

74
Screenwash, front

73
Screenwash, rear

74

220
Alphabetical index
SCR (Selective Catalytic Reduction) 20, 167
Seat angle
44
Seat belts

83–84
Seat belts, rear

83
Seats, electric

45–46
Seats, front

44–46
Seats, heated

46
Seats, rear

49–50, 88
Selector, gear

103–105, 108
Sensors (warnings)

11 3
Serial number, vehicle

195
Servicing

18, 165, 167
Settings, equipment

10, 24
Shield, snow

161
Sidelamps

67, 181
Silent vehicle warning sound (Rechargeable
hybrid)

78
Smartphone

25, 57
Snow chains

111, 161
Snow screen

161
Socket, 12 V accessory

56, 64
Socket, diagnostic

77
Speakers

58
Speed limiter

117–119
Speed limit recognition

11 4
Speedometer

10, 113
Sport mode

106–107
Spotlamps, side

68
Stability control (ESC)

81–82
Starting a Diesel engine

145
Starting/Stopping the vehicle

99
Starting the engine

99
Starting the vehicle

99, 104Starting using another battery 100, 183
State of charge, battery
24
Station, radio

206–207
Steering wheel (adjustment)

47
Stickers, customising

170
Stopping the vehicle

99, 104–105
Stop & Start

23, 51, 54, 109–110,
145, 162, 166, 185
Storage

56, 58, 60–61
Storage box

65
Storage compartments

56
Storage wells

61, 65
Storing driving positions

46
Stowing rings

61, 64
Sunroof, panoramic

41–42
Sunshine sensor

51
Sun visor

56
Suspension

167
Suspension with variable vibration
reduction

106
Switching off the engine

99
Synchronising the remote control

32
System, event data recording

80
T
Tables of engines 191–193
Tailgate
35
Tank, fuel

145–146
Technical data

191–193
Telephone

204, 208–209
Temperature, coolant

19
Ticket holder 56
Time (setting)
210
Tool box

65
Tools

172–174
Topping-up AdBlue®

168
Top Tether (fixing)

90, 95
Total distance recorder

22
Touch screen

23–24, 55
Towbar

82, 157
Towed loads

190–193
Towing

187, 189
Towing another vehicle

187, 189
Towing the vehicle

187–189
Traction battery charge

151
Traction battery (Rechargeable
hybrid)

21, 147–148, 155
Traction control (ASR)

81
Trailer

82, 157
Trailer stability assist (TSA)

82
Trajectory control systems

81
Triangle, warning

172
Trip computer

22–23
Tyres

167, 195
Tyre under-inflation detection

110, 176
U
Under-inflation (detection) 11 0
Unlocking
26, 28
Unlocking from the inside

30
Unlocking the boot

26, 28
Unlocking the doors

30

221
Alphabetical index
Unlocking the tailgate 26, 28
Updating the time
210
V
Vehicle data recording and privacy 212
Ventilation
50–51
Visibility

54
Visiopark 1

140
Visiopark 1 - Visiopark 2

141
W
Wallbox (Rechargeable hybrid) 149–150, 156
Warning and indicator lamps
11
Warning lamp, driver's seat belt
not fastened

84
Warning lamp, READY



162
Warning lamps

11
Warning lamp, seat belts

84
Warnings and indicators

11
Washing

11 3
Washing (advice)

148, 169–170
Weights

190–193
Welcome lighting

68
Wheel, spare

167, 172–174, 176–177
Windscreen, heated

54–55
Wiper blades (changing)

74–75
Wiper, rear

74
Wipers

73, 75
Wipers, automatic rain sensitive

75
Wipers, windscreen 73, 75