lock Peugeot 607 Dag 2002 User Guide

Changing the colours
Select the desired colour, then confirm.
If required, select 'automatic
day/night' , then confirm and record
the changes.
Note: this function allows the system
to change automatically to 'Night'
colour when the vehicle lights are on.
Changing the brightness
Select the 'Brightness' function,
then confirm:
– turn the dial clockwise to increase,
– turn the dial anticlockwise to decrease.
Record the modifications.
Note: this function allows only limit
ed adjustment of the brightness,
since the screen lighting is depen
dent on the sunshine/brightness sen
sor in the vehicle.
YOUR 607 IN DETAIL 45
Insert the software CDRom into the
drive in place of the map CDRom.
After a few moments, the mesage
"Warning Reprogramming Sequence"
then the message "Navigation applica
tion Processing" apears, together with
a progress bar.
When the message "Software Loading
End Eject CD" appears, eject the
software CDRom and insert the map
CDRom into the drive.
Check that the CDRom has loaded
correctly (see paragraph "Voice syn
thesis adjustment" in the chapter enti
tled "The satellite navigation system
with colour screen").

46Setting the time and date
Select the 'Hours' function, then
confirm:
– turn the dial clockwise to scroll upwards through the hours, or turn
it anticlockwise to scroll down
wards through the hours,
– confirm, to finish setting the time.
Proceed in the same way for the
'Minutes' function.
Select the '12h' or '24h' function by
pressing the dial. Select the
'Day' function, then con
firm:
– turn the dial clockwise to scroll for wards through the days, or turn it
anticlockwise to scroll backwards
through the days,
– confirm, to finish setting the day.
Proceed in the same way for the
'Month' and'Year' functions.
Record the changes.
Changing the units
Select the units required, then con
firm and record the changes.
YOUR 607 IN DETAIL
Setting the image frame
This function allows the image to be
centralised on the screen.
Select the 'Vertical frame' function,
then confirm:
– turn the dial clockwise to go up the screen,
– turn the dial anticlockwise to go down the screen,
– confirm, to finish setting the verti cal frame.
Select the 'Horizontal frame' func
tion, then confirm:
– turn the dial clockwise to go to the right,
– turn the dial anticlockwise to go to the left,
– confirm, to finish setting the hori zontal frame.
Record the changes.

YOUR 607 IN DETAIL
48
Stalk movement Function
1
Upwards Increase volume
2 Downwards Decrease volume
3 Forwards Automatic search of higher frequencies (radio)
Press for more than 2 seconds, repeat until button is released: ma nual search of
higher frequencies (radio) Selection of next track (cassette and CD )
Press for more than 2 seconds until button is released: fast forwa rd (cassette and CD)
4 Backwards Automatic search of higher frequencies (radio)
– Selection of previous track (cassette and CD)
Press for more than 2 seconds until button is released: rewind (casse tte and CD)
5 Press the end Change of source (Radio/cassette/CD)
6 Rotation Selection of next station stored in memory (radio) Sele ction of next CD (CD)
(clockwise) Reversal of direction of play (cassette)
7 Rotation Selection of previous station stored in memory (radio) Se lection of previous CD (CD)
(anticlockwise) Reversal of direction of play (cassette)
AUDIO RM2

50
Stalk movementFunction
1 Upwards Increase volume
2 Downwards Decrease volume
3 Forwards Automatic search of higher frequencies (radio)
Press for more than 2 seconds, repeat until button is released: ma nual search of
higher frequencies (radio) Selection of next track (CD)
Press for more than 2 seconds until button is released: fast forwa rd (CD), Selection of following page (Tel.)
– Press for more than 2 seconds: selection of last page (Tel.)
4 Backwards Automatic search of lower frequencies (radio)
Press for more than 2 seconds, repeat until button is released: ma nual search of
lower frequencies (radio) Selection of previous track (CD)
Press for more than 2 seconds until button is released: rewind (CD), selection of previous number (Tel.)
– Press for more than 2 seconds: selection of first page (Tel.)
5 Press the end Change of source (Radio/CD)
Press for more than 2 seconds: switch between radio/tel. mode.
Selection of directory (Tel./off) Lift/replace handset (Tel./o n).
6 Rotation Selection of next station stored in memory (radio) Sele ction of next CD (CD)
(clockwise) Selection of following menu item (Tel.)
7 Rotation Selection of previous station stored in memory (radio) Se lection of previous CD (CD)
(anticlockwise) Selection of previous menu item (Tel.)
YOUR 607 IN DETAIL
AUDIO/TELEPHONE RT2

Guidance options
The submenu 'Guidance options' offers various possibil
ities for improving guidance:
– calculation criteria,
– voice synthesis adjustment,
– managing the directories,
– clearing the directories.
Calculation criteria
Select the criteria which interest you from the proposed list,
then confirm.
When the criteria of your choice have been selected,
choose the ''OK''function, then confirm. Voice synthesis adjustment
Activate using the
'Switch off/Activate' button, then
confirm:
– once to cancel the function,
– a second time to reactivate it.
Select "Female speaker" or "Male speaker" , then
confirm.
Select the volume adjustment zone, then confirm:
– turn the dial clockwise to increase the volume,
– turn the dial anticlockwise to decrease the volume,
– confirm the setting.
Select the ' OK' function when the setting is satisfactory,
then confirm.
Note: the voice synthesis volume can also be adjusted
during a message using the audio system button or the
steering wheel stalk.
YOUR 607 IN DETAIL
86

YOUR 607 IN DETAIL95
Memorising using the buttons
To memorise:
 Place the ignition key in the 'run
ning' position (2nd notch),
 Adjust your seat and mirrors,
 Press button M,then button 1
(first driving position) or button 2
(second driving position) within
four seconds.
An audible signal confirms that a
position has been memorised.
Memorising a new position cancels
the previous one.
Recalling a memorised position
Engine off  Briefly press button 1 or 2to recall
the corresponding memorised
position. The end of the setting is
indicated by a bleep.
Note: after recalling a memorised
position five times in succession, the
function will be cancelled until the
engine is started.
Engine running
 Keep button 1 or 2pressed down
until the bleep indicates the end of
setting of the corresponding
memorised position.
Memorising seat
and mirror positions
Four driving positions can be memo
rised:
– two, using two remote control
keys (two users),
– two, using buttons M/1 and M/2.
Driving positions memorised by
the remote control key
When locking the doors, the remote
control key memorises the position
of the driver's seat and the exterior
mirrors.
When unlocking the doors, the dri
ver's seat and the exterior mirrors
resume the position memorised by
the remote control key if this has
changed in the meantime.
Each remote control key can
memorise a specific setting. Front and rear heated seats
controls
 Press the switch. The tempera
ture is regulated automatically.
 Press it again to stop operation.
Note: the command to activate heat
ing of the seat(s) remains in the
memory for two minutes after the
ignition is switched off.

YOUR 607 IN DETAIL95
Memorising using the buttons
To memorise:
 Place the ignition key in the 'run
ning' position (2nd notch),
 Adjust your seat and mirrors,
 Press button M,then button 1
(first driving position) or button 2
(second driving position) within
four seconds.
An audible signal confirms that a
position has been memorised.
Memorising a new position cancels
the previous one.
Recalling a memorised position
Engine off  Briefly press button 1 or 2to recall
the corresponding memorised
position. The end of the setting is
indicated by a bleep.
Note: after recalling a memorised
position five times in succession, the
function will be cancelled until the
engine is started.
Engine running
 Keep button 1 or 2pressed down
until the bleep indicates the end of
setting of the corresponding
memorised position.
Memorising seat
and mirror positions
Four driving positions can be memo
rised:
– two, using two remote control
keys (two users),
– two, using buttons M/1 and M/2.
Driving positions memorised by
the remote control key
When locking the doors, the remote
control key memorises the position
of the driver's seat and the exterior
mirrors.
When unlocking the doors, the dri
ver's seat and the exterior mirrors
resume the position memorised by
the remote control key if this has
changed in the meantime.
Each remote control key can
memorise a specific setting. Front and rear heated seats
controls
 Press the switch. The tempera
ture is regulated automatically.
 Press it again to stop operation.
Note: the command to activate heat
ing of the seat(s) remains in the
memory for two minutes after the
ignition is switched off.

YOUR 607 IN DETAIL
96
REAR SEATS
Rear seat
The seat back in the rear is folded
down in two parts.
Before folding down the seat back:
 lock the side seat belts.
Note: Before folding down the
2/3 part of the seat back, release the
lap belt strap by pressing the black
button of the lock.
Front armrest
To obtain a resting or driving posi
tion:
 Lift the centre handle 1and pull
the armrest forwards. To return to
the initial position, push the arm
rest backwards.
To open the lower compartment:  Raise the left handle 2. CDs and
coins can be stored here.
To open the top compartment:  Raise the right handle 3.To fold down the seat back
The unlocking controls are located in
the boot.
 pull the control corresponding to
the part of the seat back that you
wish to fold down.
It is also possible to unlock from inside the vehicle:
 lower the armrest and open the
ski flap,
 pull the button located on the
unlocking housing corresponding
to.
When putting the seat back to its original position, for your safety
make sure that it is correctly
locked.

YOUR 607 IN DETAIL97
''Isofix'' mountings*
Available on the one third side of the
rear seat, the Isofix mountings allow
fitting of a
special child seat ,
approved for PEUGEOT vehicles
and sold within its network.
The locks incorporated in the child
seat fit onto the Isofix mountings and
ensure safe, reliable and fast assem
bly.
The seat is fitted in the rearwards or
forwards facing position. In this case,
for optimium safety, it is imperative
to adjust the corresponding front
seat to the intermediate longitudinal
position, with the seat back upright. Ski flap
 Lower the armrest to access the
ski flap. Open by pulling the han
dle. The special child seat approved by
PEUGEOT is the KIDDY Isofix seat.
It can be used in the rearwards fac
ing position from birth to 13 kg and in
the forwards facing position from 9 to
18 kg.
This seat may also be used where
there are no Isofix mountings: in this
case it is compulsory to wear a
threepoint seat belt.
 Follow the instructions in the
brochure for fitting the child
seat.
* According to current legislation

YOUR 607 IN DETAIL99
Never leave a child or an
animal in a vehicle which
is exposed to the sun and
has the windows closed.
Never leave the keys within reach
of children inside the car.
Disarm the passenger air bag
when installing a rearwards or for
wards* facing child seat in the
front.
Observe strictly the recommenda
tions for assembling or attaching
the child seat as shown in the
child seat instructions.From 3 to 10 years (15 to 36 kg)
''Recaro start'': installed in the rear with a three–point seat belt.
The height and width of the seat back must be adjusted acco rding to the
age and the build of your child.
"Klippan Optima": installed in the rear with a three–point seat belt. From
the age of 6 years (approximately 22 kg), the booster is used on its own.
Remember, even for short journeys, to fasten the threepoint sea t belts or the
child seat straps, keeping the slack in relation to the child' s body to a mini
mum.
To prevent the doors from opening accidentally, use the child lock.
Also, do not open the rear windows more than a third.
* According to current legislation in the country of destinatio n.
4
5