sensor Peugeot 607 Dag 2009 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2009, Model line: 607 Dag, Model: Peugeot 607 Dag 2009Pages: 182, PDF Size: 10.7 MB
Page 5 of 182
9. Disarming of the passenger air bag * .
10. Passenger air bag.
11. Glove box/Video sockets.
12. Passenger footwell air outlet.
13. Passenger heated seat control.
14. Passenger seat electric controls.
15. Front ashtray/lighter (100 W max.).
16. Handbrake.
17. Gear lever.
18. Storage compartment.
19. Audio and telematics system.
20. Automatic air conditioning controls.
21. Central locking from the inside.
22. Multifunction display.
23. Hazard warning lights.
1. Steering lock and ignition.
2. Audio equipment steering wheel
control.
3. Wipers/wash-wipe and trip
computer controls.
4. Adjustable and closing central
vents.
5. Sunshine sensor.
6.
Windscreen de-icing and demisting vent.
7. Passenger side window de-icing
and demisting vent.
8. Adjustable and closing side vent.
* According to country.
Page 13 of 182
Front passenger air bag
1. Insertion of the key.
2. Selection of the "OFF" position.
3. Removal of the key keeping the
switch in this position. With the vehicle stationary, when the igni-
tion is switched on, the warning light comes
on if the driver and/or the front passenger
has not fastened his seat belt.
From approximately 12 mph (20 km/h)
and for two minutes, the warning light
fl a s h e s a c c o m p a n i e d b y a n a u d i b l e s i g n a l
which increases in volume. Once these
two minutes have elapsed, the warning
light remains on until the driver or front
passenger fastens his seat belt.
When the vehicle is moving, the warning
light comes on if the driver or one of the
front or rear passengers unfastens his
seat belt.
Seat belt not fastened/unfastened detection
82 80
Tyre under-inflation detection
Sensors check the pressure of the tyres
while driving and trigger a warning if
a malfunction occurs (speed above
15 mph (25 km/h)).
If one of the warning lights below ap-
pears, refer to the corresponding
paragraph.
79
Pressure OK
U n d e r - i n fl a t e d w h e e l
Punctured wheel
Page 39 of 182
3
39
VENTILATION
1. Windscreen de-icing or demisting
vents
2. Front window de-icing or
demisting vents
3. Side vents
4. Centre vents
5. Air outlets to the front passengers'
feet
6. Air outlets to the rear passengers'
feet
Recommendations for use and notes
If the interior temperature re-
mains very high following a prolonged
period parked in the sun, do not hesitate
to ventilate the passenger compartment
for a few minutes.
To obtain uniform air distribution, take
care not to obstruct the exterior air in-
take grille located at the bottom of the
windscreen, the vents, the air outlets
under the front seats and the air ex-
tractor in the boot.
In cold weather, in order to obtain uni-
form comfort, more rapid demisting
o r i f t h e fl o w o f a i r o n y o u r f a c e f e e l s
uncomfortable, it is advisable to close
vents 3 and 4.
When washing the vehicle using high
pressure equipment, do not direct
the jet towards the exterior air intake
grille.
To obtain optimum demisting, we
recommend that the windows are kept
clean on the inside of the vehicle.
In certain cases of particularly arduous
use (towing the maximum load on a
steep gradient when the temperature
is high), cutting off the air conditioning
permits the recovery of engine power
and, therefore, an increase in the tow-
ing capacity. For the air conditioning to be fully
effective, the windows must be closed.
Ensure that the passenger compart-
m e n t fi l t e r i s i n g o o d c o n d i t i o n . H a v e
t h e fi l t e r e l e m e n t s r e p l a c e d r e g u l a r l y .
If you drive in a dusty environment, re-
place them twice as often.
The air conditioning system does not
contain chlorine and does not present
any danger to the ozone layer.
Operate the air conditioning for 5 to
10 minutes, once or twice a month to
keep it in perfect working order.
The water resulting from the conden-
sation of the air conditioning system
is discharged via an opening provided
for this purpose. Therefore, a puddle
of water may form underneath the ve-
hicle when stationary.
If the system does not produce cold air,
do not use it and contact a PEUGEOT
dealer.
Flashing of the points separating the
setting value digits indicates a mal-
function of the air conditioning. Consult
a PEUGEOT dealer.
Use of the automatic regulation
of the air conditioning is recom-
mended. It permits optimised
automatic control of all of the
f o l l o w i n g f u n c t i o n s : a i r fl o w , p a s s e n g e r
compartment temperature and air distri-
bution, using various sensors (exterior
temperature and sunshine), so there is
no need to change your reference set-
tings other than the value displayed.
Page 64 of 182
4
59
ALARM Setting the alarm
S w i t c h o f f t h e i g n i t i o n a n d g e t o u t
o f t h e v e h i c l e .
S e t t h e a l a r m b y l o c k i n g o r d e a d -
locking using the remote control
(button A i n d i c a t o r l i g h t fl a s h e s
o n c e p e r s e c o n d ) .
When the alarm is triggered, the siren
sounds and the direction indicators
fl a s h f o r t h i r t y s e c o n d s .
T h e a l a r m r e m a i n s s e t f o l l o w i n g e a c h
t r i g g e r i n g i n c i d e n t .
U n l o c k t h e v e h i c l e w i t h t h e r e m o t e
control key (button B indicator light
g o e s o u t ) .
Note: if the alarm has been triggered
w h i l e y o u w e r e a w a y f r o m y o u r c a r , t h e
r a p i d fl a s h i n g o f t h e i n d i c a t o r l i g h t w i l l
s t o p w h e n y o u s w i t c h o n t h e i g n i t i o n .
Automatic activation *
The alarm is activated automatically
t w o m i n u t e s a f t e r t h e l a s t c l o s i n g o f a
d o o r o r t h e b o o t .
In order to avoid accidental triggering
o f t h e a l a r m w h e n a d o o r o r t h e b o o t
is opened, it is essential to press the
r e m o t e c o n t r o l o p e n i n g b u t t o n fi r s t .
* A c c o r d i n g t o c o u n t r y .
T h i s p r o v i d e s t w o t y p e s o f p r o t e c t i o n :
-
exterior protection , it sounds if
a door, the boot or the bonnet is
o p e n e d .
- interior protection , it sounds if
the sensors detect a variation in
t h e a i r m o v e m e n t i n s i d e t h e v e -
h i c l e ( b r e a k i n g o f a w i n d o w o r a
m o v e m e n t i n s i d e t h e v e h i c l e ) .
Warning: if the alarm has
been triggered ten times in
succession, on the eleventh
t i m e i t b e c o m e s i n a c t i v e .
Note: if button A fl a s h e s r a p i d l y , t h e
a l a r m h a s b e e n t r i g g e r e d w h i l e y o u
w e r e a w a y f r o m y o u r v e h i c l e .
I f y o u w i s h t o l o c k y o u r v e h i c l e w i t h o u t
s e t t i n g t h e a l a r m , u s e t h e d o o r l o c k .
Page 78 of 182
5
69
The timed duration must
also be set, via the multi-
function display "Person-
alisation-Configuration"
menu. Automatic switching on of the lights
Side lights and dipped beam head-
lamps switch on automatically if the
light is poor, or during operation of the
windscreen wipers. They switch off
as soon as the light becomes bright
enough or the windscreen wipers
stop.
In foggy weather or in snow, the bright-
n e s s s e n s o r c a n d e t e c t s u f fi c i e n t l i g h t .
Therefore, the lights will not come on
automatically. If necessary, you must
switch on the dipped headlamps man-
ually.
This function is active when the vehicle is
supplied to the customer.
To switch the function on
or off, use the multifunction
display "Personalisation-
C o n fi g u r a t i o n " menu.
Activation Deactivation.
When this function is activat-
ed, the indicator light on the
instrument panel comes on. When the function is deacti-
vated, the indicator light on the
instrument panel comes on.
Cancellation:
fl a s h t h e h e a d l a m p s ,
get out of the vehicle and lock it.
Manual "follow-me-home" lighting
In the absence of the automatic switching
on of the lights, the manual "follow-me-
home" lighting can be activated.
When you leave your vehicle, the side
lights and dipped headlamps remain
on for approximately 1 minute.
Activation:
switch off the engine,
fl a s h t h e h e a d l a m p s ,
get out of the vehicle and lock it.
Deactivation:
fl a s h t h e h e a d l a m p s a g a i n ,
get out of the vehicle and lock it.
If the brightness sensor does not func-
tion correctly , the system activates the
function and the lights come on.
Contact a PEUGEOT dealer to have
the system checked.
Daytime running lamps *
On vehicles which are equipped with day-
time running lamps, the dipped headlamps
come on when the vehicle is started.
This indicator lamp comes on on
the instrument panel screen.
The instruments and controls
(instrument panel, multifunc-
tion screen, air conditioning
control panel...) are only lit
on switching to the automatic lighting
mode or when the lights are switched
on manually.
* According to country.
The brightness of the display
and of the instrument panel
may change when the lights
are switched on automatically.
If your lights have been
switched on manually, turn the
ring back to position
0 , lights
off.
Page 79 of 182
5
69
The timed duration must
also be set, via the multi-
function display "Person-
alisation-Configuration"
menu. Automatic switching on of the lights
Side lights and dipped beam head-
lamps switch on automatically if the
light is poor, or during operation of the
windscreen wipers. They switch off
as soon as the light becomes bright
enough or the windscreen wipers
stop.
In foggy weather or in snow, the bright-
n e s s s e n s o r c a n d e t e c t s u f fi c i e n t l i g h t .
Therefore, the lights will not come on
automatically. If necessary, you must
switch on the dipped headlamps man-
ually.
This function is active when the vehicle is
supplied to the customer.
To switch the function on
or off, use the multifunction
display "Personalisation-
C o n fi g u r a t i o n " menu.
Activation Deactivation.
When this function is activat-
ed, the indicator light on the
instrument panel comes on. When the function is deacti-
vated, the indicator light on the
instrument panel comes on.
Cancellation:
fl a s h t h e h e a d l a m p s ,
get out of the vehicle and lock it.
Manual "follow-me-home" lighting
In the absence of the automatic switching
on of the lights, the manual "follow-me-
home" lighting can be activated.
When you leave your vehicle, the side
lights and dipped headlamps remain
on for approximately 1 minute.
Activation:
switch off the engine,
fl a s h t h e h e a d l a m p s ,
get out of the vehicle and lock it.
Deactivation:
fl a s h t h e h e a d l a m p s a g a i n ,
get out of the vehicle and lock it.
If the brightness sensor does not func-
tion correctly , the system activates the
function and the lights come on.
Contact a PEUGEOT dealer to have
the system checked.
Daytime running lamps *
On vehicles which are equipped with day-
time running lamps, the dipped headlamps
come on when the vehicle is started.
This indicator lamp comes on on
the instrument panel screen.
The instruments and controls
(instrument panel, multifunc-
tion screen, air conditioning
control panel...) are only lit
on switching to the automatic lighting
mode or when the lights are switched
on manually.
* According to country.
The brightness of the display
and of the instrument panel
may change when the lights
are switched on automatically.
If your lights have been
switched on manually, turn the
ring back to position
0 , lights
off.
Page 82 of 182
5
71
Automatic windscreen wiper
The automatic wiping is controlled by a
r a i n s e n s o r , fi t t e d o n t h e w i n d s c r e e n .
In AUTO mode, the wipers operate
automatically and adjust their speed
to the intensity of the rainfall .
Activation
Deactivation This warning light comes on
on the instrument panel, ac-
companied by a message
on the multifunction display,
when the driver presses the
wipers stalk down in
AUTO
mode.
This warning light comes on on
the instrument panel when the
driver moves the wipers stalk to
position I , 1 or 2 .
In the event of a malfunction , the
driver is informed of this by a message
on the multifunction display.
In AUTO mode, the wipers will then
operate in intermittent mode.
Contact a PEUGEOT dealer to have
the system checked.
Do not cover the rain sensor,
located on the windscreen be-
hind the interior mirror.
When using a car wash, switch
off the ignition.
In winter, it is advisable to wait until the
windscreen is completely clear of ice
before activating the automatic wipers.
When parking in snowy weather, position
the blades at the top of the windscreen
(maintenance position) to prevent the ac-
cumulation of snow.
Page 83 of 182
5
71
Automatic windscreen wiper
The automatic wiping is controlled by a
r a i n s e n s o r , fi t t e d o n t h e w i n d s c r e e n .
In AUTO mode, the wipers operate
automatically and adjust their speed
to the intensity of the rainfall .
Activation
Deactivation This warning light comes on
on the instrument panel, ac-
companied by a message
on the multifunction display,
when the driver presses the
wipers stalk down in
AUTO
mode.
This warning light comes on on
the instrument panel when the
driver moves the wipers stalk to
position I , 1 or 2 .
In the event of a malfunction , the
driver is informed of this by a message
on the multifunction display.
In AUTO mode, the wipers will then
operate in intermittent mode.
Contact a PEUGEOT dealer to have
the system checked.
Do not cover the rain sensor,
located on the windscreen be-
hind the interior mirror.
When using a car wash, switch
off the ignition.
In winter, it is advisable to wait until the
windscreen is completely clear of ice
before activating the automatic wipers.
When parking in snowy weather, position
the blades at the top of the windscreen
(maintenance position) to prevent the ac-
cumulation of snow.
Page 91 of 182
![Peugeot 607 Dag 2009 Owners Manual 7
79
TYRE UNDER-INFLATION
DETECTION
Sensors check the tyre pressure dur-
ing driving and trigger a warning in the
event of malfunction (speed greater
than 15 mph [25 km/h]). Sensor(](/img/29/13178/w960_13178-90.png "Peugeot 607 Dag 2009 Owners Manual 7
79
TYRE UNDER-INFLATION
DETECTION
Sensors check the tyre pressure dur-
ing driving and trigger a warning in the
event of malfunction (speed greater
than 15 mph [25 km/h]). Sensor(")
7
79
TYRE UNDER-INFLATION
DETECTION
Sensors check the tyre pressure dur-
ing driving and trigger a warning in the
event of malfunction (speed greater
than 15 mph [25 km/h]). Sensor(s) not detected
This warning light, accompa-
nied by an audible signal and a
message on the multifunction
display, indicates that under-in-
fl a t i o n d e t e c t i o n i s a b s e n t f r o m
one (or several) tyre(s).
Contact a PEUGEOT dealer to replace
the faulty sensor(s).
Pressure check
With the ignition on and after
the engine oil level, this warn-
ing light comes on to indicate
that the system is measuring
the pressure of the tyres.
Pressure OK This warning light comes on
if all of the tyre pressure val-
ues measured are correct.
If one of the warning lights
described below appears,
refer to the corresponding paragraph.
If none of the lights appear, contact a
PEUGEOT dealer to have the system
checked. U n d e r - i n fl a t e d t y r e
This warning light comes on,
accompanied by an audible
signal and a message on the
multifunction display, locat-
i n g t h e d e fl a t e d t y r e .
Have the tyre pressure checked as
soon as possible.
Puncture
This warning light, accom-
panied by an audible signal
and a message on the multi-
function display locating the
punctured tyre, is followed
by illumination of the STOP-
warning light.
Stop immediately, avoiding any sud-
den movement of the steering wheel
and the brakes.
Change the damaged (punctured or
v e r y d e fl a t e d ) t y r e , a n d h a v e t h e t y r e
pressure checked as soon as possible. All repairs and changing of
t y r e s o n a w h e e l fi t t e d w i t h t h i s
system must be carried out by
a PEUGEOT dealer.
T h e t y r e u n d e r - i n fl a t i o n d e t e c t i o n
system is an aid to driving which
does not replace the need for the
driver to be vigilant or to drive re-
sponsibly.
This system does not remove the ne-
cessity for having the tyre pressure
(including that of the spare wheel)
checked regularly, to ensure optimum
dynamic performance of the vehicle
and to prevent premature wear of the
tyres, particularly in the case of ardu-
ous driving conditions (heavy load,
high speed).
The system may temporarily be disturbed
by radio broadcasts on a frequency close
to it.
Note: if the damaged tyre is
temporarily stored in the boot,
it will again emit this message
to remind you of the necessity
of having it repaired. This will prevent
another warning of the same type be-
ing displayed.
Note: this message is also
displayed when one of the
tyres is away from the vehi-
cle (being repaired) or when a
w h e e l w i t h o u t a s e n s o r i s fi t t e d .
Page 109 of 182
8
92
VISUAL AND AUDIBLE
REAR AND FRONT PARKING
ASSISTANCE
Detection zone
Detection
The system is activated when:
- reverse gear is engaged,
- the speed is below 6 mph (10 km/h) in forward gear.
It is accompanied by an audible signal
and/or displaying of the vehicle on the
multifunction display. The proximity of the obstacle is indi-
cated by:
- an audible signal which becomes
more rapid as the vehicle approa-
ches the obstacle,
- a graphic on the multifunction display, with blocks which become increasin-
gly close to the vehicle.
The obstacle is located in relation to
the emission of the audible signal by
the speakers; that is, front or rear and
right or left.
When the distance between the vehicle
and the obstacle is less than approxima-
t e l y t w e n t y - fi v e c e n t i m e t r e s , t h e a u d i b l e
signal becomes continuous and/or the
"Danger" symbol appears on the multi-
function display.
The system becomes inactive again:
- when you exit reverse gear,
- when the speed is above 6 mph (10 km/h),
- at the end of the manoeuvre, when stationary, after a few seconds
(front parking assistance only).
The system is deactivated when
the vehicle has been stationary
for more than 3 seconds.
The parking assistance sys-
tem cannot, in any circumstances,
take the place of the vigilance and res-
ponsibility of the driver.
This system consists of four proximity
sensors, located in the rear and front
bumper.
It detects any obstacle (person, ve-
hicle, tree, gate, etc.) in front of or
behind the vehicle. However, it cannot
detect obstacles located directly under
the bumper.
An object, such as a stake, cone or
any other similar object may be detec-
ted at the beginning of the manoeuvre
but may no longer be detected when
the vehicle comes close to it.
In bad weather or in winter,
ensure that the sensors are
not covered with mud, frost or
snow.