display Peugeot 607 Dag 2009 Owner's Guide
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2009, Model line: 607 Dag, Model: Peugeot 607 Dag 2009Pages: 182, PDF Size: 10.7 MB
Page 59 of 182
4
56
Unlocking, opening and stopping of the boot Deadlocking
T h i s r e n d e r s t h e e x t e r n a l a n d internal
d o o r c o n t r o l s i n o p e r a t i v e .
It also deactivates the internal central
l o c k i n g b u t t o n .
Pressing button B p e r m i t s c o m -
plete locking of the vehicle or
pressing button B for more than
2 seconds p e r m i t s a u t o m a t i c c l o s -
i n g o f t h e w i n d o w s a n d s u n r o o f i n
a d d i t i o n t o l o c k i n g .
W i t h i n fi v e s e c o n d s , a second
press permits deadlocking of the
v e h i c l e .
T h i s f u n c t i o n c a n b e c o n -
fi g u r e d b y m e a n s o f a p a r a -
meter, via the multifunction
display "Personalisation-
C o n fi g u r a t i o n " m e n u . E a c h a c t i o n i s c o n fi r m e d b y
fi x e d l i g h t i n g o f t h e d i r e c t i o n
i n d i c a t o r s f o r a p p r o x i m a t e l y
t w o s e c o n d s .
Key in ignition
A b u z z e r s o u n d s o n o p e n i n g t h e d r i v -
er's door, if the key has been left in the
i g n i t i o n .
Locating your vehicle
To locate your vehicle, if you have
locked it, in a car park:
press button B , the courtesy lights
c o m e o n a n d t h e d i r e c t i o n i n d i c a -
t o r s fl a s h f o r a f e w s e c o n d s .
If the permanent locking of the
boot is activated, unlocking is
only possible via button D on
t h e r e m o t e c o n t r o l .
Press button D to unlock and open
t h e b o o t .
T h i s a c t i o n a l s o u n l o c k s t h e d o o r s .
Press button D again to stop the
m o v e m e n t o f t h e b o o t i n a n i n t e r -
m e d i a t e p o s i t i o n .
Page 72 of 182
4
6 4
Permanent locking of the boot T h i s f u n c t i o n c a n b e a c -
tivated or deactivated
v i a t h e m u l t i f u n c t i o n d i s -
play "Personalisation-
C o n fi g u r a t i o n " m e n u .
Vehicle unlocked
Closing the boot lid
Press the push button
C to start electric
c l o s i n g o f t h e b o o t l i d .
Note: do not hinder closing of the boot
lid: any obstacle to closing causes the
b o o t l i d t o s t o p a n d r i s e a f e w c e n t i m e -
t r e s a u t o m a t i c a l l y . "Boot open" warning
W i t h t h e e n g i n e r u n n i n g o r w h e n t h e v e -
h i c l e i s m o v i n g , t h e d o o r o p e n w a r n i n g
l i g h t c o m e s o n , a c c o m p a n i e d b y a n a u -
d i b l e s i g n a l a n d / o r a d i a g r a m i n d i c a t i n g
the boot on the multifunction display, if
t h e b o o t i s n o t p r o p e r l y c l o s e d .
the boot lid
While electric opening or closing of the
boot lid is in progress, you can stop its
movement at any time:
p r e s s t h e p u s h - b u t t o n B or C on
t h e b o o t l i d .
or
press button A o n t h e r e m o t e c o n -
t r o l k e y .
When it is stopped, the boot lid is held
in an intermediate position electrically
f o r a p p r o x i m a t e l y 1 0 m i n u t e s .
A f t e r t h i s t i m e , t h e s y s t e m s w i t c h e s t o
s t a n d b y a n d r e l e a s e s t h e b o o t l i d .
To leave the intermediate position, start
an electric opening or closing operation
o r m o v e t h e b o o t l i d m a n u a l l y .
When the function is active, the boot
c a n o n l y b e o p e n e d b y p r e s s i n g b u t -
ton A o n t h e r e m o t e c o n t r o l k e y .
T h i s a c t i o n w i l l o n l y u n l o c k t h e b o o t .
Press button A o n t h e r e m o t e c o n -
trol key or press the push button B
o n t h e b o o t l i d .
When opening or closing the
boot, ensure that no-one is
close to the rear of the vehicle
to avoid the risk of injury.
To close the boot lid manually, use one
o f t h e t w o h a n d l e s i n s i d e t h e b o o t l i d .
If the automatic central locking
i s a c t i v a t e d , w h e n t h e v e h i c l e
reaches a speed of 6 mph
( 1 0 k m / h ) , t h e b o o t i s l o c k e d
and the push button B i s d e a c t i v a t e d .
I t i s r e a c t i v a t e d w h e n s t a t i o n a r y b y t h e
o p e n i n g o f o n e o f t h e d o o r s .
Page 75 of 182
4
66
F u e l fi l l e r c a p o p e n When this light comes on,
accompanied by an audible
s i g n a l a n d / o r a m e s s a g e
on the multifunction display,
s c r e w t h e c a p o n a g a i n a n d
c l o s e t h e f u e l fi l l e r fl a p . Quality of the fuel used for petrol
engines
T h e p e t r o l e n g i n e s a r e p e r f e c t l y c o m -
p a t i b l e w i t h E 1 0 t y p e p e t r o l b i o f u e l s
( c o n t a i n i n g 1 0 % e t h a n o l ) , c o n f o r m i n g
t o E u r o p e a n s t a n d a r d s E N 2 2 8 a n d
E N 1 5 3 7 6 .
E 8 5 t y p e f u e l s ( c o n t a i n i n g u p t o 8 5 %
e t h a n o l ) a r e r e s e r v e d e x c l u s i v e l y f o r
vehicles marketed for the use of this
t y p e o f f u e l ( B i o F l e x v e h i c l e s ) . T h e
q u a l i t y o f t h e e t h a n o l m u s t c o m p l y w i t h
E u r o p e a n s t a n d a r d E N 1 5 3 7 6 .
For Brazil only, special vehicles are
marketed to run on fuels containing up
t o 1 0 0 % e t h a n o l ( t y p e E 1 0 0 ) .
Quality of the fuel used for Diesel
engines
T h e D i e s e l e n g i n e s a r e p e r f e c t l y c o m -
p a t i b l e w i t h b i o f u e l s w h i c h c o n f o r m t o
current and future European standards
( d i e s e l f u e l w h i c h c o m p l i e s w i t h s t a n d -
a r d E N 5 9 0 m i x e d w i t h a b i o f u e l w h i c h
c o m p l i e s w i t h s t a n d a r d E N 1 4 2 1 4 )
available at the pumps (containing up
t o 7 % F a t t y A c i d M e t h y l E s t e r ) .
T h e B 3 0 b i o f u e l c a n b e u s e d i n c e r -
t a i n D i e s e l e n g i n e s ; h o w e v e r , t h i s u s e
is subject to strict application of the
s p e c i a l s e r v i c i n g c o n d i t i o n s . C o n s u l t a
P E U G E O T d e a l e r .
T h e u s e o f a n y o t h e r t y p e o f ( b i o ) f u e l
( v e g e t a b l e o r a n i m a l o i l s , p u r e o r d i -
l u t e d , d o m e s t i c f u e l . . . ) i s s t r i c t l y p r o -
hibited (risk of damage to the engine
a n d f u e l c i r c u i t ) .
The engine and the ignition must
b e s w i t c h e d o f f w h e n fi l l i n g w i t h
fuel:
O p e n t h e f u e l fi l l e r fl a p b y p r e s s i n g
the front,
U n s c r e w t h e c a p a n d h o o k i t o v e r
the tab located on the inside of the
fl a p .
W h e n fi l l i n g u p y o u r t a n k , d o n o t c o n -
t i n u e a f t e r t h e 3 r d c u t - o f f o f t h e p u m p ;
t h i s c o u l d c a u s e y o u r v e h i c l e t o m a l -
f u n c t i o n .
The capacity of the tank is approxi-
mately 80 litres.
A f t e r fi l l i n g t h e t a n k , s c r e w t h e c a p
o n f u l l y a n d c l o s e t h e f u e l fi l l e r fl a p .
Page 77 of 182
5
68
LIGHTS STALK
Lights off.
Side lights. Dipped/main beam head-
lamps. Dipped/main beam change
Pull the stalk fully towards you.
Lights on
With the ignition and the automatic
lights function switched off, on open-
ing the driver's door a buzzer sounds
to warn you that you have left your
lights on.
Front and rear fog lamps (ring B)
Turn ring B forwards to switch on
and backwards to switch off. The
p o s i t i o n i s c o n fi r m e d b y t h e l i g h t
on the instrument panel.
Front fog lamps (one press)
These operate with the side lights, dipped
headlamps or main beam headlamps.
Rear fog lamps (two presses)
These operate with the side lights and
the front fog lamps, or with the dipped
headlamps.
Left: downwards.
Right: upwards.
D i r e c t i o n i n d i c a t o r s ( fl a s h e r s )
Note: if you forget to return
the direction indicator to its
normal position, the volume
of the audible signal will in-
crease, if you are driving at a speed
greater than 50 mph (80 km/h).
Parking lights
The side lights are lit on the side the
t r a f fi c i s o n .
With the ignition off and within the next
minute, place the direction indicators
s t a l k o n t h e t r a f fi c s i d e ( f o r e x a m p l e :
for parking on the right; switching on
of the lights on the left).
This is indicated by an audible sig-
nal and lighting of the corresponding
direction indicator on the instrument
panel.
Automatic "follow-me-home"
lighting
When you leave your vehicle with the
automatic switching on of the lights
activated , the side lights and dipped
headlamps remain on for the duration
selected when the ignition is switched
off.
To deactivate or activate this func-
tion, pass via the multifunction display
" P e r s o n a l i s a t i o n - C o n f i g u r a t i o n "
menu.
Front and rear lights (ring A)
Turn ring A to the position required.
Page 78 of 182
5
69
The timed duration must
also be set, via the multi-
function display "Person-
alisation-Configuration"
menu. Automatic switching on of the lights
Side lights and dipped beam head-
lamps switch on automatically if the
light is poor, or during operation of the
windscreen wipers. They switch off
as soon as the light becomes bright
enough or the windscreen wipers
stop.
In foggy weather or in snow, the bright-
n e s s s e n s o r c a n d e t e c t s u f fi c i e n t l i g h t .
Therefore, the lights will not come on
automatically. If necessary, you must
switch on the dipped headlamps man-
ually.
This function is active when the vehicle is
supplied to the customer.
To switch the function on
or off, use the multifunction
display "Personalisation-
C o n fi g u r a t i o n " menu.
Activation Deactivation.
When this function is activat-
ed, the indicator light on the
instrument panel comes on. When the function is deacti-
vated, the indicator light on the
instrument panel comes on.
Cancellation:
fl a s h t h e h e a d l a m p s ,
get out of the vehicle and lock it.
Manual "follow-me-home" lighting
In the absence of the automatic switching
on of the lights, the manual "follow-me-
home" lighting can be activated.
When you leave your vehicle, the side
lights and dipped headlamps remain
on for approximately 1 minute.
Activation:
switch off the engine,
fl a s h t h e h e a d l a m p s ,
get out of the vehicle and lock it.
Deactivation:
fl a s h t h e h e a d l a m p s a g a i n ,
get out of the vehicle and lock it.
If the brightness sensor does not func-
tion correctly , the system activates the
function and the lights come on.
Contact a PEUGEOT dealer to have
the system checked.
Daytime running lamps *
On vehicles which are equipped with day-
time running lamps, the dipped headlamps
come on when the vehicle is started.
This indicator lamp comes on on
the instrument panel screen.
The instruments and controls
(instrument panel, multifunc-
tion screen, air conditioning
control panel...) are only lit
on switching to the automatic lighting
mode or when the lights are switched
on manually.
* According to country.
The brightness of the display
and of the instrument panel
may change when the lights
are switched on automatically.
If your lights have been
switched on manually, turn the
ring back to position
0 , lights
off.
Page 79 of 182
5
69
The timed duration must
also be set, via the multi-
function display "Person-
alisation-Configuration"
menu. Automatic switching on of the lights
Side lights and dipped beam head-
lamps switch on automatically if the
light is poor, or during operation of the
windscreen wipers. They switch off
as soon as the light becomes bright
enough or the windscreen wipers
stop.
In foggy weather or in snow, the bright-
n e s s s e n s o r c a n d e t e c t s u f fi c i e n t l i g h t .
Therefore, the lights will not come on
automatically. If necessary, you must
switch on the dipped headlamps man-
ually.
This function is active when the vehicle is
supplied to the customer.
To switch the function on
or off, use the multifunction
display "Personalisation-
C o n fi g u r a t i o n " menu.
Activation Deactivation.
When this function is activat-
ed, the indicator light on the
instrument panel comes on. When the function is deacti-
vated, the indicator light on the
instrument panel comes on.
Cancellation:
fl a s h t h e h e a d l a m p s ,
get out of the vehicle and lock it.
Manual "follow-me-home" lighting
In the absence of the automatic switching
on of the lights, the manual "follow-me-
home" lighting can be activated.
When you leave your vehicle, the side
lights and dipped headlamps remain
on for approximately 1 minute.
Activation:
switch off the engine,
fl a s h t h e h e a d l a m p s ,
get out of the vehicle and lock it.
Deactivation:
fl a s h t h e h e a d l a m p s a g a i n ,
get out of the vehicle and lock it.
If the brightness sensor does not func-
tion correctly , the system activates the
function and the lights come on.
Contact a PEUGEOT dealer to have
the system checked.
Daytime running lamps *
On vehicles which are equipped with day-
time running lamps, the dipped headlamps
come on when the vehicle is started.
This indicator lamp comes on on
the instrument panel screen.
The instruments and controls
(instrument panel, multifunc-
tion screen, air conditioning
control panel...) are only lit
on switching to the automatic lighting
mode or when the lights are switched
on manually.
* According to country.
The brightness of the display
and of the instrument panel
may change when the lights
are switched on automatically.
If your lights have been
switched on manually, turn the
ring back to position
0 , lights
off.
Page 80 of 182
5
70
AUTOMATIC HEADLAMP
ADJUSTMENT
In cases of malfunction , the
warning light comes on on
the instrument panel display,
accompanied by an audible
signal and a message on the
multifunction display. The system places
your headlamps to the low position.
Do not touch the xenon bulbs. Consult
a PEUGEOT dealer.
When stationary with the ignition
on , the system automatically corrects
the height of the beam, whatever the
load of the vehicle. The driver is then
assured of having optimum lighting
and not causing a nuisance to other
road users.
WINDSCREEN WIPER STALK
Windscreen wipers
2 Fast wipe (heavy rain).
1 Normal wipe (moderate rain).
I Intermittent wipe
0 Off
Automatic wipe then single sweep.
In the Intermittent position, the wiping
speed is in proportion to the speed of
the vehicle.
In the AUTO position, no further action
on your part is required.
The automatic wiping must
be reactivated if the ignition
has been switched off for more
than one minute, by pressing
the stalk down .
Maintenance position
This position enables the wiper blades
to be removed.
In the minute following switching off of
the ignition, any action on the wipers
stalk positions the wipers at the top
of the windscreen (parking in winter,
cleaning, replacement of the blades).
To reposition the wipers after this has
been done, switch on the ignition and
operate the stalk.
Windscreen and headlamp wash
Pull the windscreen wiper stalk to-
wards you. The windscreen wash then
the windscreen wipers operate for a
fi x e d p e r i o d .
The headlamp wash is also activated,
if the headlamps are on.
Screenwash/headlampwash low When the minimum level of
the reservoir is reached, this
warning light comes on, ac-
companied by an audible
signal and a message on the
multi-function display.
N e x t t i m e y o u s t o p , fi l l t h e s c r e e n -
wash/headlamp wash reservoir.
If the reservoir is empty, the warning
light comes on when the ignition is
switched on, or every time the stalk is
o p e r a t e d , u n t i l t h e r e s e r v o i r i s fi l l e d .
Page 81 of 182
5
70
AUTOMATIC HEADLAMP
ADJUSTMENT
In cases of malfunction , the
warning light comes on on
the instrument panel display,
accompanied by an audible
signal and a message on the
multifunction display. The system places
your headlamps to the low position.
Do not touch the xenon bulbs. Consult
a PEUGEOT dealer.
When stationary with the ignition
on , the system automatically corrects
the height of the beam, whatever the
load of the vehicle. The driver is then
assured of having optimum lighting
and not causing a nuisance to other
road users.
WINDSCREEN WIPER STALK
Windscreen wipers
2 Fast wipe (heavy rain).
1 Normal wipe (moderate rain).
I Intermittent wipe
0 Off
Automatic wipe then single sweep.
In the Intermittent position, the wiping
speed is in proportion to the speed of
the vehicle.
In the AUTO position, no further action
on your part is required.
The automatic wiping must
be reactivated if the ignition
has been switched off for more
than one minute, by pressing
the stalk down .
Maintenance position
This position enables the wiper blades
to be removed.
In the minute following switching off of
the ignition, any action on the wipers
stalk positions the wipers at the top
of the windscreen (parking in winter,
cleaning, replacement of the blades).
To reposition the wipers after this has
been done, switch on the ignition and
operate the stalk.
Windscreen and headlamp wash
Pull the windscreen wiper stalk to-
wards you. The windscreen wash then
the windscreen wipers operate for a
fi x e d p e r i o d .
The headlamp wash is also activated,
if the headlamps are on.
Screenwash/headlampwash low When the minimum level of
the reservoir is reached, this
warning light comes on, ac-
companied by an audible
signal and a message on the
multi-function display.
N e x t t i m e y o u s t o p , fi l l t h e s c r e e n -
wash/headlamp wash reservoir.
If the reservoir is empty, the warning
light comes on when the ignition is
switched on, or every time the stalk is
o p e r a t e d , u n t i l t h e r e s e r v o i r i s fi l l e d .
Page 82 of 182
5
71
Automatic windscreen wiper
The automatic wiping is controlled by a
r a i n s e n s o r , fi t t e d o n t h e w i n d s c r e e n .
In AUTO mode, the wipers operate
automatically and adjust their speed
to the intensity of the rainfall .
Activation
Deactivation This warning light comes on
on the instrument panel, ac-
companied by a message
on the multifunction display,
when the driver presses the
wipers stalk down in
AUTO
mode.
This warning light comes on on
the instrument panel when the
driver moves the wipers stalk to
position I , 1 or 2 .
In the event of a malfunction , the
driver is informed of this by a message
on the multifunction display.
In AUTO mode, the wipers will then
operate in intermittent mode.
Contact a PEUGEOT dealer to have
the system checked.
Do not cover the rain sensor,
located on the windscreen be-
hind the interior mirror.
When using a car wash, switch
off the ignition.
In winter, it is advisable to wait until the
windscreen is completely clear of ice
before activating the automatic wipers.
When parking in snowy weather, position
the blades at the top of the windscreen
(maintenance position) to prevent the ac-
cumulation of snow.
Page 83 of 182
5
71
Automatic windscreen wiper
The automatic wiping is controlled by a
r a i n s e n s o r , fi t t e d o n t h e w i n d s c r e e n .
In AUTO mode, the wipers operate
automatically and adjust their speed
to the intensity of the rainfall .
Activation
Deactivation This warning light comes on
on the instrument panel, ac-
companied by a message
on the multifunction display,
when the driver presses the
wipers stalk down in
AUTO
mode.
This warning light comes on on
the instrument panel when the
driver moves the wipers stalk to
position I , 1 or 2 .
In the event of a malfunction , the
driver is informed of this by a message
on the multifunction display.
In AUTO mode, the wipers will then
operate in intermittent mode.
Contact a PEUGEOT dealer to have
the system checked.
Do not cover the rain sensor,
located on the windscreen be-
hind the interior mirror.
When using a car wash, switch
off the ignition.
In winter, it is advisable to wait until the
windscreen is completely clear of ice
before activating the automatic wipers.
When parking in snowy weather, position
the blades at the top of the windscreen
(maintenance position) to prevent the ac-
cumulation of snow.