wipers Peugeot 607 Dag 2009 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2009, Model line: 607 Dag, Model: Peugeot 607 Dag 2009Pages: 182, PDF Size: 10.7 MB
Page 1 of 182
Automatic switching on ofthe lights
This equipment switches on the side
lights and dipped headlamps automati-
cally when a low level of light is detected
or when the wipers are switched on.
69
Motorised boot
This equipment makes loading and
unloading of the boot easier by means
of its motorised opening and closing.
63
Tyre under-inflation detection
This equipment monitors the pressure
in each tyre and warns you of punctures
o r d e fl a t i o n .
79
Visual and audible rear and front parking assistance
When parking, this equipment warns
you of obstacles detected in front of and
behind the vehicle.
92
Page 5 of 182
9. Disarming of the passenger air bag * .
10. Passenger air bag.
11. Glove box/Video sockets.
12. Passenger footwell air outlet.
13. Passenger heated seat control.
14. Passenger seat electric controls.
15. Front ashtray/lighter (100 W max.).
16. Handbrake.
17. Gear lever.
18. Storage compartment.
19. Audio and telematics system.
20. Automatic air conditioning controls.
21. Central locking from the inside.
22. Multifunction display.
23. Hazard warning lights.
1. Steering lock and ignition.
2. Audio equipment steering wheel
control.
3. Wipers/wash-wipe and trip
computer controls.
4. Adjustable and closing central
vents.
5. Sunshine sensor.
6.
Windscreen de-icing and demisting vent.
7. Passenger side window de-icing
and demisting vent.
8. Adjustable and closing side vent.
* According to country.
Page 10 of 182
The position is indicated on the instrument
panel by the corresponding indicator light.
Ring A
Lights off
Side lights
Dipped headlamps/Main
beam headlamps
Ring B
Front fog lamps
Front fog lamps and rear
fog lamps
2. Fast wipe.
1. Normal wipe.
I. Intermittent wipe.
0. Park.
AUTO. Automatic wipe or single wipe.
A. Wash-wipe.
The automatic wiping must be reactivat-
ed if the ignition has been switched off
for more than one minute, by pressing
the stalk down.
Lights Wipers
69 70
Y o u r v e h i c l e i s fi t t e d w i t h t h e p a r k i n g l i g h t s , a u t o m a t i c f o l l o w - m e - h o m e
lighting and automatic switching on of the lights system. To activate or de-
activate these functions, refer to the corresponding sections.
If you switch the lights on manually, return the ring to p osition 0 , lights off.
68
Page 19 of 182
1
22
Manual test of the vehicle Entering CHECK mode
indicator light
This comes on following
pressing of the "CHECK"
button.
Exiting CHECK mode
indicator light
This comes on at the end of
the CHECK mode. With the engine running and the vehicle moving, the instrument panel display temporarily shows:
- warning lights, when a fault occurs,
- v e h i c l e f u n c t i o n s t a t u s i n d i c a t o r
lights, when a change occurs.
The display of certain warning lights
may be accompanied by an audible
signal and a message on the multi-
function display.
Press the "CHECK" button on the
instrument panel.
Y o u c a n s t a r t a t e s t o f t h e v e h i c l e m a n -
ually, at any time, with the ignition on,
e n g i n e r u n n i n g o r v e h i c l e m o v i n g .
This enables you to know:
- the warnings present,
- the status of the functions which can b e a c t i v a t e d o r d e a c t i v a t e d ( a u t o -
matic wipers, automatic switching
on of the lights, ESP, ...).
The associated warning lights are
displayed in succession on the instru-
ment panel display.
If a warning or a change of status oc-
curs during the CHECK mode, the
corresponding warning light(s) are
displayed during this mode and the
CHECK will cease .
Page 22 of 182
1
25
Emission control system
warning light
Display of this warning light,
accompanied by an audible
signal and a message on the
multifunction display, indicates a mal-
function of the emission control system.
Contact a PEUGEOT dealer as soon
as possible.
Low windscreen/headlamp
wash level warning light
Display of this warning light
is accompanied by an audi-
ble signal and a message on
the multifunction display.
It is indicated when the ignition is
switched on and when the wipers stalk
is pressed.
Fill the windscreen/headlamp wash
r e s e r v o i r t h e n e x t t i m e y o u s t o p .
Door/boot open warning
light
Display of this warning light
in orange, with the engine
running, is accompanied by
a diagram on the multifunction display,
showing which opening has not been
closed correctly.
Display of this warning light in red,
w h e n t h e v e h i c l e i s m o v i n g , i s a c -
companied by an audible signal and
a diagram on the multifunction display
showing which opening has not been
closed correctly.
Air bags and
pre-tensioners warning
light
Display of this warning light is
accompanied by an audible
signal and a message on the multifunc-
tion display.
It indicates an anomaly of one of the
front, side or curtain air bags or of the
front pre-tensioning seat belts.
Consult a PEUGEOT dealer.
Front brake pad wear
warning light
Display of this warning light
is accompanied by an audi-
ble signal and a message on
the multifunction display.
F o r y o u r s a f e t y , h a v e t h e p a d s r e -
placed by a PEUGEOT dealer as soon
as the warning light comes on.
Low fuel level warning
light
This is linked with the warning
light on the instrument panel.
Display of this warning light is ac-
companied by an audible signal and a
message on the multifunction display.
W h e n t h e w a r n i n g l i g h t fi r s t c o m e s o n ,
y o u h a v e approximately 5 litres of
fuel left in the tank.
I t i s e s s e n t i a l t o fi l l t h e t a n k t o a v o i d
running out of fuel.
This warning light comes on again
each time the ignition is switched on,
u n t i l t h e t a n k i s fi l l e d w i t h a s u f fi c i e n t
quantity of fuel.
N e v e r c o n t i n u e t o d r i v e u n t i l y o u r u n
out of fuel, this could damage the emis-
sion control and injection systems.
The tank capacity is approximately
8 0 l i t r e s . Fuel cap warning light
Display of this warning light
in orange, when the engine
is running, is accompanied
by a diagram on the multi-
function display.
Display of this warning light in red,
w h e n t h e v e h i c l e i s m o v i n g , i s a c c o m -
panied by an audible signal and a dia-
gram on the multifunction display.
It comes on if the fuel tank cap is not
correctly screwed on or is missing.
Page 33 of 182
1
33
TRIP COMPUTER
Each press on the button, located at the
end of the wipers stalk , displays differ-
ent trip computer data in succession:
Colour and map screen DT
- the "Current info" with:
Page 34 of 182
1
34
Distance travelled (km or miles)
T h i s i n d i c a t e s t h e d i s t a n c e t r a v e l l e d
since the computer was last set to
zero.
Distance remaining to be travelled (km or miles)
This is the distance remaining to be
t r a v e l l e d t o t h e fi n a l d e s t i n a t i o n . I t i s
e i t h e r c a l c u l a t e d b y t h e n a v i g a t i o n
s y s t e m i f g u i d a n c e i s a c t i v a t e d o r e n -
tered by the user.
If the distance is not entered, dashes
are displayed in place of the digits.
Average speed (km/h or mph)
T h i s i s t h e a v e r a g e s p e e d c a l c u l a t e d
since the computer was last set to
zero (with the ignition on). The routes
"1" and "2" are independ-
e n t b u t h a v e i d e n t i c a l a p p l i c a t i o n .
Route "1" for example allows you to
make daily calculations and route "2"
monthly calculations.
The routes
Zero reset
When the required route is displayed,
press the end of the wipers stalk for
more than two seconds.
Access via the general menu
DT screen
"TRIP" menu
Press the "MENU" or "TRIP" button
to gain access to the general menu.
Select the "Trip computer" applica-
t i o n u s i n g t h e n a v i g a t o r , t h e n c o n fi r m .
T h e " T r i p c o m p u t e r " m e n u o f f e r s v a r i o u s
options:
- Inputting of the distance to be t r a v e l l e d ,
- Warnings log,
- Status of the functions.
Page 78 of 182
5
69
The timed duration must
also be set, via the multi-
function display "Person-
alisation-Configuration"
menu. Automatic switching on of the lights
Side lights and dipped beam head-
lamps switch on automatically if the
light is poor, or during operation of the
windscreen wipers. They switch off
as soon as the light becomes bright
enough or the windscreen wipers
stop.
In foggy weather or in snow, the bright-
n e s s s e n s o r c a n d e t e c t s u f fi c i e n t l i g h t .
Therefore, the lights will not come on
automatically. If necessary, you must
switch on the dipped headlamps man-
ually.
This function is active when the vehicle is
supplied to the customer.
To switch the function on
or off, use the multifunction
display "Personalisation-
C o n fi g u r a t i o n " menu.
Activation Deactivation.
When this function is activat-
ed, the indicator light on the
instrument panel comes on. When the function is deacti-
vated, the indicator light on the
instrument panel comes on.
Cancellation:
fl a s h t h e h e a d l a m p s ,
get out of the vehicle and lock it.
Manual "follow-me-home" lighting
In the absence of the automatic switching
on of the lights, the manual "follow-me-
home" lighting can be activated.
When you leave your vehicle, the side
lights and dipped headlamps remain
on for approximately 1 minute.
Activation:
switch off the engine,
fl a s h t h e h e a d l a m p s ,
get out of the vehicle and lock it.
Deactivation:
fl a s h t h e h e a d l a m p s a g a i n ,
get out of the vehicle and lock it.
If the brightness sensor does not func-
tion correctly , the system activates the
function and the lights come on.
Contact a PEUGEOT dealer to have
the system checked.
Daytime running lamps *
On vehicles which are equipped with day-
time running lamps, the dipped headlamps
come on when the vehicle is started.
This indicator lamp comes on on
the instrument panel screen.
The instruments and controls
(instrument panel, multifunc-
tion screen, air conditioning
control panel...) are only lit
on switching to the automatic lighting
mode or when the lights are switched
on manually.
* According to country.
The brightness of the display
and of the instrument panel
may change when the lights
are switched on automatically.
If your lights have been
switched on manually, turn the
ring back to position
0 , lights
off.
Page 79 of 182
5
69
The timed duration must
also be set, via the multi-
function display "Person-
alisation-Configuration"
menu. Automatic switching on of the lights
Side lights and dipped beam head-
lamps switch on automatically if the
light is poor, or during operation of the
windscreen wipers. They switch off
as soon as the light becomes bright
enough or the windscreen wipers
stop.
In foggy weather or in snow, the bright-
n e s s s e n s o r c a n d e t e c t s u f fi c i e n t l i g h t .
Therefore, the lights will not come on
automatically. If necessary, you must
switch on the dipped headlamps man-
ually.
This function is active when the vehicle is
supplied to the customer.
To switch the function on
or off, use the multifunction
display "Personalisation-
C o n fi g u r a t i o n " menu.
Activation Deactivation.
When this function is activat-
ed, the indicator light on the
instrument panel comes on. When the function is deacti-
vated, the indicator light on the
instrument panel comes on.
Cancellation:
fl a s h t h e h e a d l a m p s ,
get out of the vehicle and lock it.
Manual "follow-me-home" lighting
In the absence of the automatic switching
on of the lights, the manual "follow-me-
home" lighting can be activated.
When you leave your vehicle, the side
lights and dipped headlamps remain
on for approximately 1 minute.
Activation:
switch off the engine,
fl a s h t h e h e a d l a m p s ,
get out of the vehicle and lock it.
Deactivation:
fl a s h t h e h e a d l a m p s a g a i n ,
get out of the vehicle and lock it.
If the brightness sensor does not func-
tion correctly , the system activates the
function and the lights come on.
Contact a PEUGEOT dealer to have
the system checked.
Daytime running lamps *
On vehicles which are equipped with day-
time running lamps, the dipped headlamps
come on when the vehicle is started.
This indicator lamp comes on on
the instrument panel screen.
The instruments and controls
(instrument panel, multifunc-
tion screen, air conditioning
control panel...) are only lit
on switching to the automatic lighting
mode or when the lights are switched
on manually.
* According to country.
The brightness of the display
and of the instrument panel
may change when the lights
are switched on automatically.
If your lights have been
switched on manually, turn the
ring back to position
0 , lights
off.
Page 80 of 182
5
70
AUTOMATIC HEADLAMP
ADJUSTMENT
In cases of malfunction , the
warning light comes on on
the instrument panel display,
accompanied by an audible
signal and a message on the
multifunction display. The system places
your headlamps to the low position.
Do not touch the xenon bulbs. Consult
a PEUGEOT dealer.
When stationary with the ignition
on , the system automatically corrects
the height of the beam, whatever the
load of the vehicle. The driver is then
assured of having optimum lighting
and not causing a nuisance to other
road users.
WINDSCREEN WIPER STALK
Windscreen wipers
2 Fast wipe (heavy rain).
1 Normal wipe (moderate rain).
I Intermittent wipe
0 Off
Automatic wipe then single sweep.
In the Intermittent position, the wiping
speed is in proportion to the speed of
the vehicle.
In the AUTO position, no further action
on your part is required.
The automatic wiping must
be reactivated if the ignition
has been switched off for more
than one minute, by pressing
the stalk down .
Maintenance position
This position enables the wiper blades
to be removed.
In the minute following switching off of
the ignition, any action on the wipers
stalk positions the wipers at the top
of the windscreen (parking in winter,
cleaning, replacement of the blades).
To reposition the wipers after this has
been done, switch on the ignition and
operate the stalk.
Windscreen and headlamp wash
Pull the windscreen wiper stalk to-
wards you. The windscreen wash then
the windscreen wipers operate for a
fi x e d p e r i o d .
The headlamp wash is also activated,
if the headlamps are on.
Screenwash/headlampwash low When the minimum level of
the reservoir is reached, this
warning light comes on, ac-
companied by an audible
signal and a message on the
multi-function display.
N e x t t i m e y o u s t o p , fi l l t h e s c r e e n -
wash/headlamp wash reservoir.
If the reservoir is empty, the warning
light comes on when the ignition is
switched on, or every time the stalk is
o p e r a t e d , u n t i l t h e r e s e r v o i r i s fi l l e d .