change time PEUGEOT 807 2003 Owners Manual

12-05-2003





 
;
Select the Navigation/Guidance icon using the dial, then validate bypressing the dial to access the main
8
$
+
&8menu.
&&
'&
Switch on the RT3 audio/telephone and insert the navigation CD-Rom. Press the 8
8button to access
the $&&
'& .
During guidance, if the navigation CD-Rom is present, the screen displays
different information depending on the manoeuvres to be carried out. ,- Current manoeuvre or compass.
.- Next manoeuvre to be carried out.
0- Next road to be taken.
- Current road.
/- Estimated time of arrival at destination.
;- Distance to final destination.
- Distance to next manoeuvre.

& 7
– depending on the situation of the vehicle and on the reception of GPS information, this information may disappear from the screen temporarily,
– during guidance, it is only possible to listen to a CD if the vehicle is fitted with a CD changer.
&&
&

)&
 2%
;/;/

0
)'&
&&
*
*
&&

,,.0.

12-05-2003





 

Select the 99&%99 function to
access the file in which the address you are looking for is archived. Select a description by scrolling down the list by means of the dial,then confirm by pressing the dial.The directory file is then displayed. Select the 8<8function, then press
the dial to access the guidance acti- vation function.
>5
)&
&
$&
#%
)& % &'-
&&$

& 
&


)&
&%
Select the
8 
&&
& +
 8 function to access one of the
last ten addresses stored. Select a description by scrolling down the list by means of the dial,then confirm it by pressing the dial.The complete address is then dis-played. Select the 8<8function, then press
the dial to access the guidance acti- vation function.
>5
)&
 
$&
#%
)&
% &'-
&&
6
&
6
)&
 

&
&  Activate the function
99*)$$
)&
&99 , then input the distance
involved in the change required. Select the 8<8function then vali-
date by pressing the dial. The system calculates the change which is closest to the value inputand gives you the option of whetheror not to use this change.
&
6
)&
&
You can consult the destination address at any time by activating the
8*) &
& 8
function.
*)$$
)&

&

12-05-2003

4
= This video assembly will enable the rear passengers to pass the timepleasantly while watching theirfavourite film or playing theirfavourite game, by means, in partic-
ular, of the connection of a DVDplayer or games console. The rear video kit consists of:
– a 4/3, 6.8 inch, LCD colour monitor,
– two high frequency, wireless, stereo headphones,
– a remote control,
– a base with two wired headphone outputs, a courtesy light with its switch and a monitor release button,
– three audio/video sockets in the glove compartment . The monitor's remote control incor-porates the following controls:
,
"POWER" button to switch the
monitor on/off.
7, "SOURCE" button for selection of
the input source, AV1 or AV2.
>, "SETUP" button for selection of
the settings.
, "VOL " and "VOL " buttons to
change the settings or increase/decrease the volume atthe wired headphones.
, Housing for the two LR03 batteries.
3, "MUTE" button to cut off/restore
the volume at the wired head-phones.
:, "DOMELIGHT" button to switch
the courtesy light on/off remotely.
 

?
The monitor has left/right and up/down position adjustment. It canalso be stored in its base by folding itand pushing it to lock it. Once stored,
the supply, and that of the wireless
headphones, is cut off automaticallyafter approximately fifteen minutes. The rear video kit accepts all types of
audio/video source, PAL/NTSC com-
patible, such as: DVD player, cam-
corder, games console, ... These sources are connected to the three audio/video sockets, 4
*in
the glove compartment only as the
47
sockets are not available.