lock PEUGEOT 807 2008.5 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2008.5, Model line: 807, Model: PEUGEOT 807 2008.5Pages: 252, PDF Size: 10.67 MB
Page 66 of 252
ERGONOMICS and COMFORT
3
7 1
Seats
ROW 2 CENTRE SEAT
T h i s c a n b e p l a c e d i n r o w 3 , o n t h e l e f t .
"Low table" position
1. P l a c e t h e h e a d r e s t r a i n t i n t h e l o w position.
2. A t t h e t o p ( a t t h e b a c k o f t h e s e a t ) , l i f t t h e h a n d l e i d e n t i fi e d b y t h e s y m b o l a n d g u i d e t h e t i l t i n g o f t h e s e a t b a c k t o w a r d s i t s s e a t c u s h i o n .
3. Y o u h a v e a " l o w t a b l e " . T o r e t u r n t o t h e s e a t p o s i t i o n , l i f t t h e h a n d l e a n d g u i d e t h e r a i s i n g o f t h e s e a t b a c k .
Removing the centre seat
1. Place the seat in the "low table" position.
2. U s i n g t h e c o n t r o l w h i c h y o u p u l l , t i l t t h e s e a t b a c k f o r w a r d s s o r e l e a s i n g the rear anchorages from the s l i d e s .
3. G r a b t h e r e d s t r a p w h i c h a p p e a r s a n d p u l l i t u p w a r d s , t h e f r o n t anchorages unlock .
4. T h e s t r a p , l i k e t h e h a n d l e , e n a b l e s you to remove the seat.
Page 67 of 252
72
Seats Rear head restraints
T h e r e a r h e a d r e s t r a i n t s c a n b e r e m o v e d a n d h a v e t w o p o s i t i o n s :
h i g h , p o s i t i o n f o r u s e ,
l o w , s t o r a g e p o s i t i o n .
T o r a i s e o r l o w e r a h e a d r e s t r a i n t , p u l l i t f o r w a r d s s l i d i n g i t a t t h e s a m e t i m e .
T o r e m o v e i t , p l a c e i t i n t h e h i g h p o s i t i o n , p u s h t h e l u g a n d p u l l i t f o r w a r d s a n d u p w a r d s .
T o r e fi t i t , e n g a g e t h e h e a d r e s t r a i n t
r o d s i n t h e h o l e s t a k i n g c a r e t o r e m a i n
in the centreline of the seat back.
N e v e r d r i v e w i t h t h e h e a d r e s t r a i n t s r e m o v e d , t h e y m u s t b e i n p l a c e a n d c o r r e c t l y a d j u s t e d .
R e fi t t i n g t h e c e n t r e s e a t
Check that there is no obstacle o b s t r u c t i n g t h e s l i d e s o r preventing correct locking of the seat anchorages.
1. Place the front anchorages at the f r o n t s t o p i n t h e s l i d e s . S u p p o r t t h e s t r a p fi r m l y f o r e a s i e r p o s i t i o n i n g o f the seat.
2. T i l t t h e f o l d e d s e a t t o w a r d s t h e r e a r . The rear anchorages lock.
3. R a i s e t h e s e a t b a c k a n d s l i d e t h e seat.
Turning a rear seat round
T h e r e a r s e a t s c a n b e p l a c e d i n a " f a c e to face" position.
C a r r y o u t t h e o p e r a t i o n s d e s c r i b e d f o r removal t h e n t u r n t h e s e a t r o u n d a n d r e s u m e w i t h t h e p r o c e d u r e f o r r e fi t t i n gthe seat .
This turning operation must be c a r r i e d o u t w h e n s t a t i o n a r y .
D r i v i n g w i t h a p a s s e n g e r s e a t e d f a c i n g t h e r e a r i s p r o h i b i t e d .
W h e n t h e v e h i c l e i s b e i n g d r i v e n , p l a c i n g a r o w 2 s e a t i n t h e c l o s e d position while a passenger is sitting in r o w 3 i s p r o h i b i t e d .
Page 68 of 252
72
Seats Rear head restraints
T h e r e a r h e a d r e s t r a i n t s c a n b e r e m o v e d a n d h a v e t w o p o s i t i o n s :
h i g h , p o s i t i o n f o r u s e ,
l o w , s t o r a g e p o s i t i o n .
T o r a i s e o r l o w e r a h e a d r e s t r a i n t , p u l l i t f o r w a r d s s l i d i n g i t a t t h e s a m e t i m e .
T o r e m o v e i t , p l a c e i t i n t h e h i g h p o s i t i o n , p u s h t h e l u g a n d p u l l i t f o r w a r d s a n d u p w a r d s .
T o r e fi t i t , e n g a g e t h e h e a d r e s t r a i n t
r o d s i n t h e h o l e s t a k i n g c a r e t o r e m a i n
in the centreline of the seat back.
N e v e r d r i v e w i t h t h e h e a d r e s t r a i n t s r e m o v e d , t h e y m u s t b e i n p l a c e a n d c o r r e c t l y a d j u s t e d .
R e fi t t i n g t h e c e n t r e s e a t
Check that there is no obstacle o b s t r u c t i n g t h e s l i d e s o r preventing correct locking of the seat anchorages.
1. Place the front anchorages at the f r o n t s t o p i n t h e s l i d e s . S u p p o r t t h e s t r a p fi r m l y f o r e a s i e r p o s i t i o n i n g o f the seat.
2. T i l t t h e f o l d e d s e a t t o w a r d s t h e r e a r . The rear anchorages lock.
3. R a i s e t h e s e a t b a c k a n d s l i d e t h e seat.
Turning a rear seat round
T h e r e a r s e a t s c a n b e p l a c e d i n a " f a c e to face" position.
C a r r y o u t t h e o p e r a t i o n s d e s c r i b e d f o r removal t h e n t u r n t h e s e a t r o u n d a n d r e s u m e w i t h t h e p r o c e d u r e f o r r e fi t t i n gthe seat .
This turning operation must be c a r r i e d o u t w h e n s t a t i o n a r y .
D r i v i n g w i t h a p a s s e n g e r s e a t e d f a c i n g t h e r e a r i s p r o h i b i t e d .
W h e n t h e v e h i c l e i s b e i n g d r i v e n , p l a c i n g a r o w 2 s e a t i n t h e c l o s e d position while a passenger is sitting in r o w 3 i s p r o h i b i t e d .
Page 69 of 252
ERGONOMICS and COMFORT
3
7 3
Seats
REAR BENCH SEAT
F r o m t h e b o o t , y o u c a n p u l l on strap B a n d s l i d e t h e s e a t f o r w a r d s t o m a k e i t e a s i e r t o l o a d the vehicle.
The rear bench seat must only be fi t t e d i n r o w 3 .
Seat back folded position
1. P l a c e t h e h e a d r e s t r a i n t s i n t h e l o w position.
2. Pull the strap C u p w a r d s , f r o m t h e tailgate.
3. Tilt the seat back on the seat cushion.
Vertical position of the bench seat
1. P l a c e t h e h e a d r e s t r a i n t s i n t h e l o w position.
2. Pull the strap C u p w a r d s , f r o m t h e tailgate.
3. F o l d t h e s e a t b a c k o n t o t h e s e a t cushion .
4. Pull the lever D to unlock the rear anchorages.
5. Place the seat in the vertical " f o l d e d " p o s i t i o n .
W h e n d r i v i n g , a t t a c h t h e r e t a i n i n g s t r a p s t o t h e h a n d l e s .
Forwards/backwards
adjustment
F r o m t h e s e a t c u s h i o n , l i f t b a r
A a n d
s l i d e t h e s e a t t o w a r d s t h e f r o n t o r t h e
rear.
Page 70 of 252
74
Seats
Removing the bench seat
1. F o l d t h e s e a t t o t h e v e r t i c a l position.
2. Grasp the two bars E u n d e r n e a t h the seat .
3. The front anchorages unlock.
R e fi t t i n g t h e b e n c h s e a t
F o r r e m o v a l a n d r e fi t t i n g , p a s s t h e r e a r s e a t , i n t h e " f o l d e d " p o s i t i o n , t h r o u g h t h e s l i d i n g s i d e d o o r s .
Check that there is nothing b l o c k i n g t h e r u n n e r s w h i c h c o u l d prevent correct locking of the bench seat anchorages.
1. Position the front anchorages at the front stop of the runners.
2. T i l t t h e f o l d e d s e a t r e a r w a r d s .
3. The rear anchorages then lock.
4. U n l o c k t h e s e a t b a c k a n d l i f t i t using the strap C . Good practice
W h e n t h e v e h i c l e i s b e i n g d r i v e n , i t i s p r o h i b i t e d f o r a p a s s e n g e r t o s i t :
-
i n r o w 3 i f t h e s e a t b a c k i n f r o n t
( r o w 2 ) i s i n t h e t a b l e p o s i t i o n .
- i n r o w 3 i f t h e s e a t / b e n c h i n f r o n t
( r o w 2 ) i s i n t h e v e r t i c a l f o l d e d
position.
- i n t h e c e n t r e s e a t i f t h e r i g h t - h a n d
s i d e s e a t i s i n t h e v e r t i c a l f o l d e d
position.
Page 81 of 252
86
Mirrors and windows Manual interior mirror
The interior mirror has two positions:
- d a y ( n o r m a l ) ,
- n i g h t ( a n t i - d a z z l e ) .
T o c h a n g e f r o m o n e t o t h e o t h e r , p u s h
o r p u l l t h e l e v e r o n t h e l o w e r e d g e o f
the mirror.
Automatic day/night interior
mirror
T h i s a u t o m a t i c a l l y a n d g r a d u a l l y
c h a n g e s b e t w e e n t h e d a y a n d n i g h t
p o s i t i o n s . T o p r e v e n t d a z z l i n g ,
t h e g l a s s o f t h e m i r r o r d a r k e n s
a u t o m a t i c a l l y d e p e n d i n g o n t h e
i n t e n s i t y o f t h e l i g h t f r o m b e h i n d .
I t c l e a r s a s t h e l i g h t ( h e a d l a m p s o f
f o l l o w i n g v e h i c l e s , s u n l i g h t ) d e c r e a s e s ,
ensuring maximum visibility.
S w i t c h o n t h e i g n i t i o n a n d p r e s s s w i t c h 1 :
- I n d i c a t o r l i g h t 2 l i t ( s w i t c h p r e s s e d ) : automatic operation.
- I n d i c a t o r l i g h t 2 off: automatic system off. The mirror remains at its most clear.
MIRRORS
MIRRORS AND WINDOWS
Special feature
T o e n s u r e m a x i m u m v i s i b i l i t y d u r i n g m a n o e u v r e s , t h e m i r r o r c l e a r s automatically when reverse gear is e n g a g e d .
Electric exterior mirrors
- Move switch A to the right or to t h e l e f t t o s e l e c t t h e c o r r e s p o n d i n g mirror.
- Move knob B i n a l l f o u r d i r e c t i o n s t o a d j u s t .
- Return switch A to the centre position.
W h e n p a r k e d , t h e m i r r o r s c a n b e
f o l d e d b a c k m a n u a l l y , o r e l e c t r i c a l l y b y
pulling switch
A r e a r w a r d s .
E l e c t r i c u n f o l d i n g o f t h e m i r r o r s i s
possible with the key on unlocking the
vehicle.
Page 162 of 252
Parking assistance
IN-CAR TECHNOLOGY
4
167
FRONT AND/OR REAR
PARKING ASSISTANCE
I f fi t t e d o n y o u r v e h i c l e , t h e s y s t e m i s
audible and/or visual and consists of
four proximity sensors, located in the
front and/or rear bumper. The sensors
detect any obstacle which enters
t h e fi e l d : p e r s o n , v e h i c l e , t r e e , g a t e ,
located in front of or behind the vehicle
during the manoeuvre.
Objects the size or thickness of which
is detected at the beginning of the
manoeuvre, may no longer be detected
at the end of the manoeuvre: due to
blind spots between and below the
sensors. Examples: stake, roadworks
cone, kerbstone.
This system does not take the place of
the vigilance and responsibility of the
driver. Switching the system on
The system is activated as soon as:
- reverse gear is engaged,
- the speed falls below 6 mph
(10 km/h) in forward gear.
This is accompanied by an audible
signal and displaying of the vehicle,
depending on the display.
The proximity information is given by:
- an audible signal, which becomes more rapid as the vehicle
approaches the obstacle,
- a graphic on the display, with blocks which become progressively
closer to the vehicle.
The obstacle is located in relation to
the emission of the audible signal from
the speakers, front or rear and right or
left. Switching the system off
Press the button again to re-activate
the system. The indicator light on the
button switches off.
In bad or wintry weather, ensure
that the sensors are not covered
with mud, frost or snow.
In this case (e.g. sensors dirty), when
reverse gear is engaged, the indicator
l i g h t fl a s h e s , a c c o m p a n i e d b y a n
audible signal and a message on the
display.
Consult a PEUGEOT dealer.
Deactivation
Press the button on the fascia
to deactivate the system (to
avoid waking a child...). The
indicator light on the button
comes on.
The system returns to the inactive
status:
- when you exit reverse gear,
- when the speed increases to above
6 mph (10 km/h),
- at the end of the manoeuvre, when the vehicle becomes stationary
(front parking assistance only).
Re-activation
When the distance between the vehicle
and the obstacle is less than approximately
thirty centimetres, the audible signal
becomes continuous and the "Danger"
symbol appears depending on the display.
This function will be deactivated
automatically when the vehicle is
towing a trailer or when a bicycle
c a r r i e r i s fi t t e d ( v e h i c l e fi t t e d w i t h
towing attachment or bicycle carrier
recommended by PEUGEOT ).
Page 165 of 252
170
Driving safety
ANTI-LOCK BRAKING SYSTEM
(ABS) AND ELECTRONIC BRAKE
FORCE DISTRIBUTION (EBFD)
The ABS, in conjunction with the
electronic brake force distribution,
increases the stability and
manoeuvrability of your vehicle on
braking, in particular on poor or
slippery road surfaces.
HORN
Press one of the spokes of the steering
wheel. When changing wheels (tyres and
rims), make sure that these are
approved.
The anti-lock braking system comes
into operation automatically when there
is a risk of wheel lock.
When this warning light
comes on, accompanied by
a buzzer and a message,
it indicates that there is a
malfunction of the ABS, which
can cause a loss of control of the
vehicle when braking.
When this warning light
comes on, connected to
the STOP warning light,
accompanied by a buzzer
and a message, it indicates
that there is a malfunction of the
electronic brake force distribution,
which can cause a loss of control of
the vehicle when braking.
Stop immediately.
In both cases, consult a
PEUGEOT dealer .
Normal operation of the ABS may
make itself felt by slight vibrations of
the brake pedal.
In emergency braking, press
v e r y fi r m l y w i t h o u t r e l e a s i n g t h e
pressure.
ASSISTANCE SYSTEM (EBA)
In an emergency, this system enables
the optimum braking pressure to be
reached more quickly, press the pedal
fi r m l y w i t h o u t r e l e a s i n g i t .
It is triggered by the speed at which the
brake pedal is activated.
This alters the resistance of the brake
pedal under your foot.
To prolong the operation of the
emergency braking assistance system:
keep your foot on the brake pedal.
Page 168 of 252
SAFETY
173
Seat belts
5
FRONT AND REAR SIDE SEAT
BELTS
The front seats and the rear side seats
o f r o w 2 a r e fi t t e d w i t h p r e - t e n s i o n e r s
and force limiters. The lap strap must be positioned as
low as possible on the pelvis. The
chest strap must pass over the hollow
of the shoulder.
Check that the seat belt is fastened
correctly by pulling the strap. The force-limiting device reduces the
pressure of the seat belt against the
chest of the occupant, so increasing
his protection.
A bag placed on the front
passenger seat or a pet sitting on
this seat may trigger the lighting of
this warning light.
SEAT BELTS
Front seat belt warning light
If the driver and/or front
passenger has/have not
fastened his/their seat belt,
this warning light comes on.
Then, at a speed in excess of
approximately 15 mph (25 km/h), it
fl a s h e s a c c o m p a n i e d b y a n a u d i b l e
signal of increasing volume (for
approximately 90 seconds) and a
message on the display.
Row 2 rear side seat belts
For your comfort, if you are not using
the seat belt, slide the seat belt loop to
the upper stop to prevent the tongue
from vibrating.
To adjust the height
- To lower the attachment point,
squeeze control and slide it
downwards.
- To raise the attachment point, slide control upwards.
To fasten
- Pull the strap, then insert the buckle into the stalk.
- Check that the seat belt is secured correctly by pulling the strap. Inertia reel seat belts
T h e s e a r e fi t t e d w i t h a d e v i c e w h i c h
locks the seat belt automatically in
the event of an impact or emergency
braking.
Safety in the event of a frontal impact
has been improved by the introduction
of pre-tensioning and force-limiting
seat belts. Depending on the
seriousness of the impact, the pre-
tensioning system instantly tightens the
s e a t b e l t s fi r m l y a g a i n s t t h e b o d y o f t h e
occupant.
The pre-tensioning seat belts are
armed when the ignition is on.
Row 3 rear side seat belts
T h e r o w 3 r e a r s i d e s e a t s a r e fi t t e d
with two seat belts which are both
three-point inertia reel belts with force
limiter.
Page 169 of 252
174
Seat belts Triggering of the pretensioners is
accompanied by a slight discharge
of harmless smoke and a noise, due
to the activation of the pyrotechnic
cartridge incorporated in the system.
The force limiter reduces the pressure
of the seat belt against the body of the
o c c u p a n t s . T h e e q u i p m e n t fi t t e d t o
these seat belts is operational when
the ignition is switched on.
T h e i n e r t i a r e e l s a r e fi t t e d w i t h a d e v i c e
which automatically locks the strap in
the event of a collision or emergency
braking. You can release the seat belt
and allow the strap to roll up. Do not invert the seat belt buckles as
t h e y w i l l n o t f u l fi l t h e i r r o l e c o m p l e t e l y .
I f t h e s e a t s a r e fi t t e d w i t h a r m r e s t s , t h e
lap part of the seat belt should always
pass under the armrest.
Check that the seat belt is fastened
c o r r e c t l y b y p u l l i n g t h e s t r a p fi r m l y .
Good practice
Wherever you are seated in the
vehicle, always fasten your seat belt,
even for short journeys.
T h e s e a t b e l t s a r e fi t t e d w i t h a n i n e r t i a
reel which automatically adjusts the
length of the strap to your size. The
seat belt is rolled up automatically
when not in use.
Ensure that the seat belt is rolled up
correctly after use.
After folding or moving a rear seat or
bench seat, ensure that the seat belt is
rolled up correctly in its compartment
and that the buckle is ready to
accommodate the tongue.
Depending on the nature and
seriousness of any impact, the
pretensioning device may be triggered
b e f o r e a n d i n d e p e n d e n t l y o f i n fl a t i o n
of the air bags. It instantly tightens
the seat belts against the body of the
occupants.
To install the seat belt, move the
tongue into position to insert it into the
buckle.
Row 2 and 3 rear centre seat
belts
The row 2 rear centre seat and the
rear bench seat centre seat have an
integrated three-point inertia reel seat
belt.
The air bag warning light comes on
if the pretensioners are triggered.
Consult a PEUGEOT dealer.
In order to be effective, a seat belt
must:
- restrain one person only,
- must not be twisted, check by pulling in front of you with an even
movement,
- be tightened as close to the body as possible.
The upper part of the seat belt should
be positioned in the hollow of the
shoulder.
The lap part should be placed as low
as possible on the pelvis. Recommendations for children:
- use a suitable child seat if the
passenger is less than 12 years old
o r s h o r t e r t h a n o n e m e t r e fi f t y ,
- never allow a child to travel on your lap, even with the seat belt
fastened.
For further information regarding child
seats, refer to the "Children on board"
section of chapter 5.
In accordance with current safety
regulations, your PEUGEOT dealer
guarantees all work or any checks,
from testing to maintenance, on your
seat belt equipment.
Have the seat belts checked regularly
(even after a minor impact) by a
PEUGEOT dealer : they must not show
any signs of wear, cutting or fraying
and they must not be transformed or
m o d i fi e d .
Clean the seat belt straps with soapy
water or a textile cleaning product, sold
by PEUGEOT dealers .