heating Peugeot Boxer 2010 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2010, Model line: Boxer, Model: Peugeot Boxer 2010Pages: 167, PDF Size: 4.33 MB
Page 4 of 167
8
Familiarisation
INTERIOR
Instruments and controls
1. Fusebox.
2. Programmable heating.
3. Cruise control switch.
4. MODE, configuration and
personalisation/lighting rheostat/
headlamp beam height adjustment/
anti-tilt protection.
5. Lighting and direction indicator control
stalk.
6. Instrument panel with screen.
7. Wiper/screenwash/trip computer control
stalk.
8. Ignition switch.
9. Driver ’s airbag/horn.
Page 6 of 167
2
10
Familiarisation
SITTING COMFORTABLY
58
Driver's seat adjustments
Forwards-backwards Seat height Seat back angle
Lumbar support Seat heating Variable damping sea t
Page 10 of 167
14
Familiarisation
VENTILATION
Digital
air conditioning : use of the fully automatic operation by pressing the "AUTO" button is recommended.
Recommended interior settings
Manual Air Conditioning
If I require... Air distribution Temperatur e Air flow Air recirculation AC
Heating -
Cooling
Demisting
Defrosting
Page 28 of 167
3 1
2
READY TO SET OFF
Instruments and controls
Warning
lamp is indicates Solution - action
Water in Diesel
f i l t e r o n , a c c o m p a n i e d
by a message on
the screen. t h a t t h e r e i s w a t e r i n t h e D i e s e l
f u e l f i l t e r .
H a v e t h e f i l t e r b l e d b y a P E U G E O T d e a l e r .
R e f e r t o t h e " C h e c k s " s e c t i o n o f c h a p t e r 7 .
L o w f u e l l e v e l o n w i t h t h e
g a u g e n e e d l e i n
zone E.
t h a t t h e f u e l r e s e r v e d i s b e i n g
u s e d . F i l l u p w i t h f u e l w i t h o u t d e l a y . T h e c a l c u l a t i o n o
f t h e
r e m a i n i n g f u e l d e p e n d s o n t h e s t y l e o f d r i v i n g , t h e p r o f i l e
o f t h e r o a d , t h e t i m e e l a p s e d a n d t h e d i s t a n c e t r a v e l l e d
s i n c e t h e w a r n i n g l a m p f i r s t c a m e o n .
f l a s h i n g . a m a l f u n c t i o n . C o n s u l t a P E U G E O T d e a l e r .
Diesel
pre-heating on. t h a t t h e w e a t h e r c o n d i t i o n s
impose pre-heating. W a i t f o r t h e w a r n i n g l a m p t o s w i t c h o f f b e f o r e o p e
r a t i n g
the starter.
S i d e l a m p s o n , a c c o m p a n i e d
by a message on
the screen. manual selection.
T u r n t h e r i n g o n t h e l i g h t i n g s t a l k t o t h e f i r s t p o s i t i o n .
a u t o m a t i c i l l u m i n a t i o n o f
h e a d l a m p s , r i n g i n p o s i t i o n A . A d j u s t t h e s e n s i t i v i t y o f t h e s u n s h i n e s e n s o r v i a
t h e
M O D E m e n u . R e f e r t o t h e " M o d e " s e c t i o n o f c h a p t e r 4 .
D i p p e d b e a m
h e a d l a m p s
on. manual selection.
T u r n t h e r i n g o n t h e l i g h t i n g s t a l k t o t h e s e c o n d p o s i t i o n .
Main beam
h e a d l a m p s p u l l i n g o f t h e s t a l k t o w a r d s y o u . P u l l t h e s t a l k
t o r e t u r n t o d i p p e d b e a m h e a d l a m p s .
Page 34 of 167
3 7
2
READY TO SET OFF
Starting and stopping
STARTING AND STOPPING
MAR p o s i t i o n : r u n n i n g .
C e r t a i n a c c e s s o r i e s c a n b e u s e d .
AVV p o s i t i o n : s t a r t e r .
T h e s t a r t e r i s o p e r a t e d .
STOP p o s i t i o n : s t e e r i n g l o c k .
T h e i g n i t i o n i s o f f .
Good practice when starting
Engine immobiliser warning
lamp
I f t h i s c o m e s o n , u s e a n o t h e r k e y
a n d h a v e t h e f a u l t y k e y c h e c k e d
b y a P E U G E O T d e a l e r .
Diesel pre-heating warning
lamp
Turn the key to the MAR position.
I n c o l d w e a t h e r , w a i t f o r t h i s
w a r n i n g l a m p t o s w i t c h o f f t h e n o p e r a t e t h e
s t a r t e r ( AVV p o s i t i o n ) u n t i l t h e e n g i n e s t a r t s .
I f t h e t e m p e r a t u r e i s h i g h e n o u g h , t h e
w a r n i n g l a m p c o m e s o n f o r l e s s t h a n o n e
s e c o n d , y o u c a n s t a r t w i t h o u t w a i t i n g . Door or bonnet open warning
lamp
I f t h i s c o m e s o n , a d o o r o r t h e b o n n e t
i s n o t c l o s e d c o r r e c t l y , c h e c k !
Good practice when stopping
Minimise engine and gearbox wear
W h e n s w i t c h i n g o f f t h e i g n i t i o n , l e t t h e
e n g i n e t o i d l e f o r a f e w s e c o n d s t o a l l o w t h e
t u r b o c h a r g e r t o s l o w d o w n .
D o n o t p r e s s t h e a c c e l e r a t o r w h e n s w i t c h i n g
o f f t h e i g n i t i o n .
T h e r e i s n o n e e d t o e n g a g e a g e a r a f t e r
parking the vehicle.
In low temperatures
I n m o u n t a i n o u s a n d / o r c o l d a r e a s , i t i s
a d v i s a b l e t o u s e a " w i n t e r " t y p e f u e l s u i t e d
t o l o w o r m i n u s t e m p e r a t u r e s .
Page 47 of 167
49
3
EASE OF USE AND COMFORT
Ventilation
WITH MANUAL ADJUSTMENT
If your vehicle is fitted with these controls,
they are located on the dashboard on the
centre console control panel.
Temperature adjustment
Control positioned:
- in the blue zone provides cool air,
Air flow
The force of the blown air, from
the vents, varies from 1 to the
strongest 4. Remember to adjust
this control in order to reach the
ambient air comfort level. To switch off the
blower, place the control in position 0.
Air conditioning
The air conditioning mode can only operate
with the engine running.
The air blower must be set to at
least 1.
Pressing the button triggers the
operation of the air conditioning,
the LED is on. Pressing the button again
switches the function off and the LED is
switched off.
Air distribution
The air supply distribution is directed by the
control turned towards:
the side vents and the central
vents,
the side vents, the central vents
and the footwells,
the footwells,
the windscreen, the footwells and
the side windows,
the windscreen and the side
windows.
- in the red zone provides
heating of the interior ambient
air.
Page 48 of 167
50
Ventilation
Intake of exterior air
Recommended settings for the Air Conditioning Recommended settings for the Air Conditioning
For optimum operation of the system, the settings below are recommended:
Recirculation of interior air
This position should only be
temporary.
Used with the air conditioning
switched on and setting of the
force of blown air (from 1 to 4), recirculation
enables you to obtain the required ambient
air comfort level with both hot or cold
settings.
Recirculation temporarily prevents exterior
odours and smoke from entering the
passenger compartment. If I require...
Air
distribution Temperature Air flow Air
recirculation AC
Heating
-
Cooling
Demisting
Defrosting
When your ambient air comfort level has
been reached, return to the intake of exterior
air position to permit renewal of the air in the
passenger compartment and demisting. This
operating mode is preferable. This is the preferred operating
position.
Page 50 of 167
52
Ventilation
Comfort value adjustment ring
The settings range between:
- increasing the interior ambient air temperature HI (High) which goes up to
to a maximum setting of 32,
- cooling the interior ambient air temperature LO (Low) which goes down
to a setting of 16.
Air distribution
Pressing illuminates the LED on the buttons
which distribute the air flow towards:
the windscreen and front side
window vents (demisting/
defrosting the windows),
the central and side vents (chest
and face),
the vents in the front and rear
areas (feet).
The combination of buttons permits
improvement of air distribution.
Air flow
Successive presses of this button
increase (+) or reduce (-) the
force of the air flow to the interior.
Intake of exterior air/recirculation of interior air
When the LED is on, the air
recirculates inside the passenger
compartment to prevent the entry of exterior
odours and smoke. This position should be
temporary.
When the ambient air comfort level has been
reached, pressing the button switches the
LED off and reopens the exterior air intake.
Pressing the AUTO button also restores
the intake of exterior air. Returning to this
position permits renewal of the air in the
passenger compartment and demisting.
Pressing the AUTO button again restores
the FULL AUTO function.
Rapid demisting/defrosting
Pressing this control permits
rapid clearing of the windows.
The LED is on.
The system manages the air conditioning,
the flow and intake of air, the defrosting
of the rear screen and provides optimum
distribution of the air to the windscreen and
front side windows.
If your vehicle is fitted with additional
heating, switch it off to ensure rapid and
effective demisting/defrosting.
Page 51 of 167
53
3
EASE OF USE AND COMFORT
Ventilation
ADDITIONAL HEATING SYSTEMS
Supplementary heating
On the 2-3 seats version, this is located
under the seat on the driver's side with air
diffusion directed forwards.
REAR HEATING AND/OR AIR CONDITIONING
If your vehicle is fitted with an
additional air conditioning unit,
located in the rear of the vehicle:
the distribution duct located in
the roof and the individual diffusion vents
provide a perfect diffusion of cold air.
The warm air diffused at the floor, from the
front air conditioning unit, is distributed at
the feet of the rear passengers of rows 2
and 3.
A warm air diffusion vent, located on the rear
left wheelarch, may complete the assembly
for the feet of the rear passengers of row 3.
Additional heating
This is an additional passenger compartment
heating system which supplements the
standard equipment.
It can operate independently of the engine.
Depending on the level of finish of the
equipment, its start-up can be programmed.
Additional heater or programmable heating
This is an additional and separate system
which heats the Diesel engine hot coolant
loop to make starting easier.
It improves the demisting and defrosting
performance and that of the heated seats, if
fitted to the vehicle.
The passenger compartment heating is
brought up to temperature more rapidly.
This system must be programmed to start up
before you enter the vehicle. On the 5-9 seats version, it is
located at the rear. Depending
on the model version, the air
diffusion is either direct from the
rear or comes from the rail located under
each of the two rows of seats.
Press this control to activate/
deactivate the heating. The LED
is on if the heating is activated.
When rapid demisting and
defrosting is required, switch off
the control.
Page 52 of 167
54
Ventilation
Activation/Deactivation
This control, located on the
control panel at the right-hand
end of the dashboard, enables
you to activate/deactivate the
operation of the rear controls from the
driver's seat.
The first press activates (LED on).
A second press deactivates (LED off). To deactivate the blower, place the control in
position 0.
However, a safety device will ventilate the
rear circuit automatically, even if the control
is in position 0, to prevent the formation of
condensation.
Air flow
The force of the blown air, via
the vents, varies from 1 to the
strongest 4.
To obtain a comfortable level of
ambient air, remember to adjust this control.
Comfort value adjustment
- on the blue, produces cool air,
- on the red, produces heating of the ambient air.
The OFF control on the "Mono-zone" central
control panel switches the function off.
Control positioned: