audio PEUGEOT BOXER 2015 Repair Manual

233Steering mounted controls
Pause / restore the CD, uSB/iPod,
Bluetooth® sources.
Mute / restore sound from the radio.
Switch the microphone off / on during
a telephone call.
Switch voice recognition on.
Interrupt a voice message to start a
new voice command.
Interrupt voice recognition. Push up or down: increase or
decrease the volume for voice
announcements and music sources,
hands-free and speaking texts. Accept an incoming call.
Accept a second incoming call and
put the current call on hold.
Switch on voice recognition for the
telephone function.
Interrupt a voice message to issue
another voice command.
Interrupt voice recognition.
Radio, push up or down: select the
next / previous station.
Radio, hold up or down: sweep
frequencies up / down until the button
is released.
Media, push up or down: select the
next / previous track.
Media, hold up or down: fast for ward
/
b

ack until the button is released.
Reject the incoming call.
end t

he call in progress.
Audio System
AuDIO and teLeMAtICS
10

234
Briefly press one of the buttons to
carry out an automatic search down/
up for radio stations. Press the "
rAdIo" bu
tton to select
the FM or AM waveband.
tur

n the dial to carry out a manual
search down/up for radio stations.
Press the dial to display the list of
stations received locally.
tur

n the dial to choose a radio station
then press to select it. Press the "
rAdIo" bu

tton to select
the FM or AM waveband.
Press the ME
nu bu
tton.
Press the "
A-B-
c" bu
tton to select
one of the three sets of preset
stations.
Select "reg ional" then press to
switch RDS on or off.
Make a long press one of the buttons
to preset the current radio station.
the n

ame of the station is displayed
and an audible signal confirms the
preset.
Press " InFo" to d isplay information
on the current radio station.
Presetting a station
Selecting a station
the surroundings (hills, buildings,
t unnel, parking, under ground...) may
prevent reception, including RDS
alternative frequencies.
thi

s phenomenon is normal in the
propagation of radio waves and does
not in any way imply a fault with the
audio system.RDS, if displayed, makes it possible
to continue listening to the same radio
station using the alternative frequencies
function. However, in certain conditions
it may not be possible to stay with the
same station as not all radio stations
cover the entire country. When reception
is poor the system switches to a regional
frequency.
Radio
rdS
Audio System

235
Select "Alternative frequencies
(AF)" then press to activate or
deactivate the frequency.
Press the "ME
nu" bu

tton.
Select "
tra

ffic information
(
tA

)" then press to switch traffic
announcements on or off.
When the "
reg

ional" function is on,
the system can then search for a
stronger frequency at any time.the tA (tra ffic Announcement)
function gives priority to playing
tA
al

ert messages.
to be a
ctive, this
function requires good reception of
a radio station that broadcasts this
type of message. As soon as traffic
information is broadcast, the media
playing is interrupted automatically
to transmit the
tA me

ssage. Normal
play of the media is restored after
transmission of the message.
Alternative frequencies (AF)rec eiving tA m essages
Audio System
AuDIO and teLeMAtICS
10

236
uSB playerA uxiliary socket (Aux)uSB port
Media
the system builds playlists (in temporary
m emory), an operation which can take from
a few seconds to several minutes at the first
connection.
Reduce the number of non-music files and the
number of folders to reduce the waiting time.
the p

laylists are updated every time the
ignition is switched off or connection of a
uSB
m

emory stick. However, the audio system
memorises these lists and if they are not
modified, the loading time will be shorter. Insert a
uSB m
emory stick or connect a
peripheral device to the
uSB p
ort in the central
storage space, provided for transferring data
to the system, using a suitable cable (not
supplied). Located on the centre console, this port is used
only for powering and recharging the portable
device connected.
Connect the portable device (MP3 player…) to
the auxiliary Jack socket using an audio cable
(not supplied).
First adjust the volume on your portable device
(to a high level).
the

n adjust the volume of your
audio system.
Control is via the portable device.
the f

unctions of the device connected to the
"A
uX" s

ocket are controlled directly from the
device itself: changing track / folder / playlist or
starting/ending/pausing play using the audio
system control panel or steering mounted
controls is therefore not possible.
Do not leave the cable of your portable device
connected to the A
uX so

cket when not in use,
to avoid possible noises from the speakers.
Audio System

237
It is recommended that official Apple® uSB c
ables are used to ensure correct
operation.
the s

ystem does not support
two
i

dentical devices connected at
the same time (two memory sticks,
two Apple
® players) but it is possible
to c
onnect one memory stick and one
Apple
® player at the same time.
the s

ystem supports
uSB m
ass storage
devices, BlackBerry
® devices or Apple®
players via uSB p
orts. the a
daptor cable is not
supplied.
Other peripherals, not recognised on
connection, must be connected to the auxiliary
socket using a Jack cable (not supplied).
use o

nly
uSB m

emory sticks formatted FA
t 3
2
(File Allocation
table

).
It is advisable to restrict file names to
20
c

haracters, without using of special
characters (e.g.: "
" ? ; ù

) to avoid any playing
and displaying problems.
Information and advice
the version of software in the audio
s ystem may not be compatible with the
generation of your Apple
® p l aye r.
connecting Apple® players
Connect the Apple® player to the uSB p ort
using a suitable cable (not supplied).
Play starts automatically.
Control is via the audio system.
the c
lassifications available are those
of the portable device connected
(artists / albums / genres / tracks /
playlists / audio books / podcasts).
the d
efault classification used is by
artist.
to mo
dify the classification used,
return to the first level of the menu
then select the desired classification
(playlists for example) and confirm
to go down through the menu to the
desired track.
Audio System
AuDIO and teLeMAtICS
10

238telephone
Pairing a Bluetooth®
telephone
As a safety measure and because they
require prolonged attention on the part
of the driver, the operations for pairing
the Bluetooth mobile telephone to the
hands-free system of the audio system
must be carried out with the vehicle
stationary.
Switch on the Bluetooth function of your
telephone and ensure that it is "visible to all"
(telephone configuration).
Select "
con

nect tel" to start the
pairing procedure, and search for the
name of the system in the telephone. When the pairing procedure has
finished successfully, a screen page
with "
con

nection successful"
appears:
Confirm to display the menus.
the t

elephone menu gives access to
the following functions in particular:
"
call

log", "
co

ntacts" *, "Keypad ".
When pairing, a screen page is displayed
showing progress in the operation.
usi

ng the telephone's keypad, enter the PIN
displayed in the screen of the system or
confirm in the telephone the PIN displayed. Press "
Phone".
If no telephone has yet been paired
in the system, a special page is
displayed in the screen. If the operation fails, we recommend
switching the function Bluetooth of
your telephone off and then on again.
* If your telephone is fully compatible.
receiving a call
An incoming call is announced by a ring and a
superimposed display in the screen. Press this button to accept the
incoming call.
Or press this button to reject the call.
Ending a call
to reject a call, press this button at
t he steering mounted controls.
Making a call
Select "call log" for access to the
recent calls made.
Select "
co

ntacts" to display your
contacts and use the dial to scroll
through the list.
to di

al a number, use the system's
" Keypad ".
Audio System

239Settings
System settingsAudio
Press the "MEnu" bu tton. Press the "MEnu" bu tton.
Select " System settings " then
press to display the list of settings for
activating or deactivating options:
-
"rese

t default value "
-
" 2

0 min. delay for switching
off "
-
" L

imit initial volume "
-
" A

utomatic " Select "
Audio" then press to display
the list of settings for activating or
deactivating options:
-
"tr e

b l e"
-
" Mi

d-range"
-
" Ba

ss"
-
" (

Activate/
de
activate)"
-
" V

olume linked to vehicle
speed "
-
" L

oudness"
the a

udio settings are different and
independent for each audio source.
Audio System
AuDIO and teLeMAtICS
10

240Voice commands
Steering mounted controls
Information - using the system
Instead of touching the screen, you can
use your voice to issue commands to
the system. Voice interaction can be quickly used
if these buttons are pressed during
a voice message from the system; It
allows a voice command to be issued
di r e c t l y.
For example, if the system is speaking
a voice help message and if you want
to know the command to give the
system, by pressing these buttons, the
voice message is interrupted and the
desired voice command can be spoken
directly (so avoiding the need to listed
to the complete voice help message).
When the system is waiting for a voice
command from the user, pressing these
buttons closes the voice session.
to en

sure that your voice commands
are always recognised by the system,
we recommend that you follow the
advice below:
-
sp

eak with a normal tone of voice,
-
be

fore speaking, always wait for
the "beep" (audible signal),
-
th

e system is able to recognise
the voice commands delivered,
independent off gender, tone and
inflexion of the voice of the person
speaking,
-
ke

ep the noise level inside the
vehicle as low as possible,
-
be

fore speaking a voice command,
ask other passengers not to speak.
As the system recognizes voice
commands whatever is said, when
more than one person speaks
at the same time, it is possible
that the system will recognise
commands different or additional to
the one intended,
eve

ry time a button is pressed, a
"beep" (audible signal) is produced
and the screen displays a page of
suggestions asking the user to speak a
command.
- fo
r best operation, it is
recommended that the windows
and opening roof (for versions/
markets where it is available) be
closed to avoid inter ference from
extraneous noises.
thi

s button switches on the
"
tele

phone" voice recognition mode,
which makes it possible to start calls,
view the log of recent /received/made,
display contacts, etc.
thi

s button switches on the "Radio/
Media" voice recognition mode,
which makes it possible to tune to a
specific radio station radio or specific
AM/FM radio frequency, play a track
or an album on a
uSB m

emory stick /
iPod/MP3 CD.
Audio System

241
Global voice commands
these commands can be made from any screen page after pressing the voice recognition or telephone button located on the steering wheel,
a s long as there is no telephone call in progress.
Level 1 Level 2Level 3
com

ment
Help Provides generic help to the user by suggesting
certain available commands.
canc

el Closes the current voice session.
repe

at Repeats to the user the last voice message spoken.
Voice tutorial Provides the user with detailed description of how
to use the voice system.
Audio System
AuDIO and teLeMAtICS
10

242
Level 1Level 2Level 3com ment
ca

ll * Henri
dup

ont Dials the telephone number associated with contact
Henri Dupont.
ca

ll* Henri
dup

ontMobile phone Dials the telephone number labelled mobile phone
associated with contact Henri Dupont.
cal

l number 0123456789 Calls the telephone number 0123456789.
call

again Calls the number or contact of the last call made.
cal

l back Calls the number or contact of the last call received.
rec

ent calls* Displays the list of recent calls: outgoing, missed
and incoming.
cal

ls made* Displays the list of outgoing calls.
Missed calls* Displays the list of missed calls.
*


t
hi

s function is available only if the telephone connected to the system supports downloading of contacts and recent calls and if the
download has been done.
"telephone" voice commands
If a telephone is connected to the system, these voice commands can be issued from any main screen page after pressing the telephone
button on the steering wheel, as long as there is no telephone call in progress.
If there is no telephone connected, a voice message announces: "No telephone connected. Connect a telephone and try again" and the voice
session will be closed.
Audio System