display Peugeot Boxer Dag 2003.5 Service Manual

17-11-2003
YOUR BOXER IN DETAIL
96
PROGRAMMED OPERATION Note:
before setting the program-
mable heating, ensure that the clock
is set correctly. Operation of the heating can be pro- grammed between one minute and24 hours in advance. Note: you can store three different
start-up time settings and program- me one deferred start-up. Note: if you wish to switch on the
heating at a set time every day, you must reprogramme the stored time
each day.
Press button 6. The screen comes
on. The segments "A"or the previous
stored time and the preselection number "B"are displayed for ten
seconds. Note: to display the other preselec-
ted times, press button 6several
times within ten seconds until the required preselection number "B"
appears.
To set the start-up time, press one of the buttons 5within ten seconds. The programming is stored when:
Ð the start-up time and the preselec-
tion number "B" disappear,
Ð the screen lighting switches off.

17-11-2003
W:snow programme.
P ark :to immobilise the vehicle or start the engine ,
with the handbrake on or off. R everse :to reverse (select this function with the vehi-
cle stationary, engine at idle).
N eutral :to start the engine and to park, with the
handbrake on. Note: if function N is engaged inadvertently while
driving, allow the engine to return to idle before engaging function Dto accelerate.
D rive :for driving in automatic mode.
M anual :for driving in manual mode.
YOUR BOXER IN DETAIL
122
Moving off
With the engine running, to move off from position P:
 it is essential to press the
brake pedal to exit position P,
 select function R, D or M, then
gradually release the pressureon the brake pedal; the vehicle
moves off immediately.
You can also move off from position N:
 release the handbrake, with yourfoot on the brake
 select function R, D or M, then
gradually release the pressureon the brake pedal; the vehicle
moves off immediately.
WARNING When the engine is at idle, brakes not applied, if function R, D or Mis
selected the vehicle moves evenwithout the accelerator beingpressed. For this reason, do not leave chil- dren unsupervised inside thevehicle, with the engine running. When maintenance operations need to be carried out with the engine run-ning, apply the handbrake and selectposition P.
"PORSCHE TIPTRONIC SYSTEM" AUTOMATIC GEARBOX The four speed automaticgearbox offers a choice between the comfort of inte-
gral automatic operation , enhanced by a snowprogramme, or the pleasure of
manual gear changing .
Gear selection gate  Move the lever in the gate to select a function. Once the function is selected, the corresponding indicator light appears on
the instrument panel display.

17-11-2003
Automatic operation Automatic changing of the four
gears :
 select function Din the gate.
The gearbox always selects the most suitable gear according to the follow-ing parameters:
Ð the style of driving,
Ð the road profile,
Ð the vehicle load. The gearbox is then operating in auto-adaptive mode, without anyaction on your part.
WARNING Never select function Nwhen the
vehicle is moving. Never select functions Por Runless
the vehicle is stationary.Never change between functions to optimise braking on a slippery surface. Notes For immediate maximum accelera-
tion without touching the gear lever,press the accelerator pedal down as
far as it will go (kick down). The gear-box will automatically change downor maintain the gear selected untilmaximum engine speed is reached. When braking, the gearbox will auto- matically change down in order to
provide efficient engine braking. If you take your foot off the accelera-
tor suddenly, the gearbox will notchange to a higher gear for reasons
of safety.
Snow programme In addition to the auto-adaptive pro- gramme, there is a special programme. The programme is displayed on the instrument panel screen. This programme improves starting
and drive when traction is poor.  Press button Wonce the vehicle
has been started and function D
selected.
The gearbox adapts to driving on slippery roads. Note: you can return to the auto-
adaptive programme at any time.  Press button Wagain to switch
off the programme you are in. Manual operation Manual changing of the
four gears:
 select function Min the gate,
 push the lever to the +sign to
change to a higher gear,
 pull the lever to the Ðsign to
change to a lower gear.
You can change from position D
(driving in automatic mode) to posi- tion M(driving in manual mode) at
any time. Note It is only possible to change from one gear to another if the vehicle speedand engine speed permit. If they donot, the vehicle will operate tem-porarily in automatic mode. When the vehicle is stationary or
moving very slowly, the gearboxautomatically selects gear M1.
Programme W(snow) does not oper-
ate in manual mode.
YOUR BOXER IN DETAIL 123

17-11-2003
Operation The twin fuel system allows petrol or liquid petroleum gas (LPG version) orcompressed natural gas (CNG
version) to be used indifferently. Press switch 1on the left-hand side of
the instrument panel:
Ð green indicator light 2on; operating
using LPG/CNG,
Ð red indicator light 3on; operating
using petrol. Starting Irrespective of the position of switch
1,
the engine always starts using petrol. The switch to operation using LPG/CNG will take place if switch 1
is in the LPG/CNG position. The indi-
cator light 2flashes until the engine
reaches an adequate temperature. The switch from one fuel to the other is displayed by the switching on/swit-
ching off of the corresponding indica-tor light 2or 3.
When the minimum LPG/CNG levelis reached, while driving, this is indi-cated by lighting of the red indicatorlight of the group of indicator lights 4;
the system then switches to operation
using petrol automatically. It is advisable to drive in petrol mode from time to time to keep thepetrol injection system in goodcondition.
PETROL/LPG OR CNG DUAL-FUEL VERSION 171