mirror Peugeot Expert Tepee 2011 User Guide

[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2011, Model line: Expert Tepee, Model: Peugeot Expert Tepee 2011
Pages: 268, PDF Size: 9.78 MB

Load previous 10 pages

Page 91 of 268

Peugeot Expert Tepee 2011 User Guide 89
Mirrors and windows

EASE OF USE and COMFOR
T
3

ELECTRIC WINDOWS

1.
Driver’s electric window control

2.
Passenger electric window control The electrical functions of th

89
Mirrors and windows

EASE OF USE and COMFOR
T
3

ELECTRIC WINDOWS

1.
Driver’s electric window control

2.
Passenger electric window control The electrical functions of the electric
windows are deactivated:

- approximately 45 seconds after the
ignition is switched off,

- after one of the front doors is opened,
if the ignition is off.

Reinitialisation

Following reconnection of the battery,
the safety auto-reverse function must be
reinitialised.
Lower the window fully, then raise it, it will
rise in steps of a few centimetres each time
the control is pressed. Repeat the operation
until the window is fully closed.
Continue to press the control for at least
one second after the window closed position
has been reached.
The safety auto-reverse does not operate
during these operations.
There are two operating modes:

Manual mode

Press or pull the control, without passing
the point of resistance. The window stops
when you release the control.

Automatic mode

Press or pull the control, beyond the point
of resistance. The window opens or closes
fully when the control is released. Pressing
the control again stops the movement of the
window.
Safety auto-reverse
If your vehicle is fitted with the safety
auto-reverse function, when the window
rises and meets an obstacle, it stops and
partially lowers.
In the event of unwanted opening of the
window on closing, press the control until
the window is fully open. Within the next
4 seconds, pull the control until the window
is fully closed.
The safety auto-reverse does not operate
during these operations.

Good practice

If the electric windows meet an obstacle
during operation, you must reverse the
movement of the window. To do this, press
the control concerned.
When the driver operates the passenger
electric window controls, he must ensure
that no one is preventing correct closing
of the windows.
The driver must ensure that the passengers
use the electric windows correctly.
Be aware of children when operating the
windows.