Peugeot iOn 2012 Owner's Manual

8
Practical information
99








Changing a bulb
1.Direction indicators(W21W - 21 W).2.Sidelamps (W5W - 5 W).3.Main beam headlamps (HB3 - 60 W).4.Dipped beam headlamps (H11 - 55 W).

The headlamps are fitted with polycarbonate glass with a protectivecoating:)do not clean them using a dry or abrasive cloth, nor with a detergent or solvent product,)
use a sponge and soapy water, )
when using a high pressure washer on persistent marks, do not keep the lance directed towards thelamps or their edges for too long, so as not to damage their protectivecoating and seals,)
do not touch the bulb directly withyour fingers, use lint-free cloths.

Changing a bulb should only be done after the headlamp has been switchedoff for a few minutes (risk of serious burns).
It is imperative to use only anti-ultraviolet (UV) type bulbs in order not
to damage the headlamp. Always replace a failed bulb with anew bulb with the same type andspecification.
Front lamps
5. Front foglamps
(H8 - 35 W).6.Daytime running lamps (P13W - 13 W).

Practical information
100
) Lift the cover B
, using a screwdriver
protected by a cloth.) Slacken fixing screw C
until the head of the screw touches the trim.
)Remove the bumper retaining clips, using ascrewdriver. )Carefully lift the bumper. To replace a failed bulb,
you must first remove
the lamp. To remove the lamp:)Open the bonnet. )Press tab A to release the connector.
Access to bulbs

8
Practical information
101
Slacken fixing screw D , while holding the
bumper away.)Slacken fixing screw E.
) Pull the lamp towards you, and disengage
the tab Fto remove it completely.

Practical information
102
Changing sidelamp bulbs
) Turn the bulb holder to the left and pull it out. )
Pull the bulb out and and change it.
To reassemble, carry out these operations in reverse order.
Changing main beam headlampbulbs
)Turn the bulb holder to the left and pull it out.)Remove the bulb by pressing on the
tongue.)Change the bulb.
For reassembly, carry out these operations in
reverse order.

Changing direction indicator
bulbs
)Turn the bulb holder to the left and pull itout.)Pull the bulb out and change it.
To r e f i t , c a r ry out these operations in reverse order.
Amber coloured bulbs must be replaced with bulbs of identical specifications and colour.

8
Practical information
103
Changing dipped beam headlamp bulbs
)Turn the bulb holder to the left and pull it out. )Remove the bulb by pressing on the
tongue.)Change the bulb.
To r efit, carry out these operations in reverse order.








Changing front foglamp bulbs / daytime running lamp bulbs
)
Put the front wheels onto full lock, to facilitate access.)
Remove the clips securing the protective covers on the bulb holders.)
Move the cover aside.
)
Turn the bulb holder ( Afor the front fog
lamp, B for the daytime running lamp) to
the left and pull it out.
) Pull the bulb out and change it.
To reassemble, carry out these operations in
reverse order.

Practical information
104
1.Brake lamps / Sidelamps (21 W / 15 W or LEDs).2. Direction indicators (W Y21W - 21 W).3.Reversing lamps (W21W - 21 W).
Rear lamps
Amber coloured bulbs, such as the direction indicators, must be replaced with bulbs of identical specification and colour.
In some weather conditions (e.g. lowtemperature or humidity), the presenceof misting on the internal sur face of the glass of the headlamps and rear lamps is normal; it disappears after the lampshave been on for a few minutes.
Changing integrated directionindicator side repeater bulbs (WY5W - 5 W)
)Push the repeater towards the rear anddisengage it.)Turn the bulb holder to the left and pull itout.)Pull the bulb out and change it.
To reassemble, carry out these operations inreverse order.

Access to bulbs
)Remove the two screws. )Disengage the lamp unit by pulling it
towards you.

8
Practical information
105
Changing a direction indicator bulb


Changing brake lamp / sidelampLEDs
All work on the LED lamps must be carried out
by a PEUGEOT dealer or qualified workshop.

Changing a reversing lamp bulb
Changing brake lamp / sidelamp
bulbs (21 W / 15 W)
)Turn the bulb holder to the left and pull it out.)Pull out the bulb and change it.
To r e f i t , c a r ry out these operations in reverseorder.
)
Turn the bulb holder to the left and pull it out. )
Pull the bulb out and replace it.
To r e f i t , c a r ry out these operations in reverse order.
) Turn the bulb holder to the left and pull it out.)
Pull the bulb out and replace it.
To r e f i t , c a r ry out these operations in reverseorder.

Practical information
106
Changing a foglamp bulb (W21W - 21W)
)Remove the cover.)Turn the bulb holder to the left and pull itout.)Pull the bulb out and change it.
To r e f i t , c a r r
y out these operations in reverse order.






Third brake lamp (W5W - 5W)
)
Remove the two screws. )
Pull out the bulb-holder. )
Pull out the bulb and change it.
To r efit, carry out these operations in reverseorder.








Changing number plate lamp
bulbs (W5W - 5W)
)Push the cover inwards.)Turn the bulb holder and pull it out.)Remove the bulb and change it.
To r efit, carry out these operations in reverse order.

8
Practical information
107











Changing a fuse
the fusebox cover in the dashboard (left handside).
For access: )Unclip the cover and remove it completely by pulling it towards you.)Remove the tweezer.



Access to tools
Before changing a fuse, the cause of the failure
must be identified and rectified. ) Check that the ignition switch is in the "LOCK" position. )
Identify the faulty fuse by checking thecondition of its filament.
Changing a fuse
Good Failed
)
Use the special tweezer to extract the fuse from its location.)
Always replace the faulty fuse with a fuse
of the same rating. ) Check that the number etched on the box,
the rating etched on the top and the tablesbelow all agree.
PEUGEOT will not accept responsibilityfor the cost incurred in repairing your vehicle or for rectifying the malfunctionsresulting from the installation of accessories not supplied and not recommended by PEUGEOT andnot installed in accordance with itsinstructions, in par ticular when the consumption of all of the additional equipment connected exceeds 10 milliamperes.

Your vehicle's electrical system isdesigned to operate with standard or optional equipment.
Before installing other electrical equipment or accessories in your vehicle, contact a PEUGEOT dealer or a qualified workshop.

Practical information
108
Dashboard fuses
The fusebox is placed in the lower dashboard (left-hand side).
Fuse N°RatingFunctions
17. 5 A
Left hand front and rear sidelamps.
215 A
Accessory socket
3- Not used
47. 5 A Starter motor.
520
A Audio system
6
- Not used.
77.5 A
Vehicle equipment, right hand
front and rear sidelamps.
87. 5 A Electric door mirrors
97.5 A
Supervisory controller.
107.5 A
Air conditioning.
1110 A
Rear foglamp
1215 A Door locking.
13 10 A
Courtes
y lamp.