Peugeot iOn 2017 Owner's Manual

129
Ion_en_Chap08_en-cas-de-panne_ed01-2016
Changing sidelamp bulbs
F Turn the bulb holder to the left and pull it out.
F

P
ull the bulb out and and change it.
To reassemble, carry out these operations in
reverse order.
Changing main beam headlamp
bulbs
F Turn the bulb holder to the left and pull it out.
F R emove the bulb by pressing on the
tongue.
F

C
hange the bulb.
For reassembly, carry out these operations in
reverse order.
Changing direction indicator
bulbs
F Turn the bulb holder to the left and pull it out.
F

P
ull the bulb out and change it.
To refit, carry out these operations in reverse
o r d e r.
Amber coloured bulbs must be replaced
with bulbs of identical specifications
and colour.
8
In the event of a breakdown

130
Ion_en_Chap08_en-cas-de-panne_ed01-2016
Changing dipped beam headlamp
bulbs
F Turn the bulb holder to the left and pull it out.
F R emove the bulb by pressing on the
tongue.
F

C
hange the bulb.
To refit, carry out these operations in reverse
o r d e r.
Changing front foglamp bulbs /
daytime running lamp bulbs
F Put the front wheels onto full lock, to facilitate access.
F

R
emove the clips securing the protective
covers on the bulb holders.
F

M
ove the cover aside. F
T urn the bulb holder (A for the front fog
lamp, B for the daytime running lamp) to
the left and pull it out.
F

P
ull the bulb out and change it.
To reassemble, carry out these operations in
reverse order.
In the event of a breakdown

131
Ion_en_Chap08_en-cas-de-panne_ed01-2016
1. Brake lamps / Sidelamps (21 W / 15 W or LEDs).
2.
D

irection indicators (WY21W - 21 W).
3.
R

eversing lamps (W21W - 21 W).
Rear lamps
Amber coloured bulbs, such as the
direction indicators, must be replaced
with bulbs of identical specification and
c o l o u r.
In some weather conditions (e.g. low
temperature or humidity), the presence
of misting on the internal sur face of the
glass of the headlamps and rear lamps
is normal; it disappears after the lamps
have been on for a few minutes.
Changing integrated direction
indicator side repeater bulbs
(WY5W - 5 W)
F Push the repeater towards the rear and
disengage it.
F

T
urn the bulb holder to the left and pull
it
out.
F

P
ull the bulb out and change it.
To reassemble, carry out these operations in
reverse order.
Access to bulbs
F Remove the two screws.
F D isengage the lamp unit by pulling it
towards you.
8
In the event of a breakdown

132
Ion_en_Chap08_en-cas-de-panne_ed01-2016
Changing a direction indicator
bulb
Changing brake lamp / sidelamp
LEDs
All work on the LED lamps must be carried out
by a PEUGEOT dealer or qualified workshop.
Changing a reversing lamp bulb
Changing brake lamp / sidelamp
bulbs (21 W / 15 W)
F Turn the bulb holder to the left and pull it out.
F
P ull out the bulb and change it.
To refit, carry out these operations in reverse
o r d e r. F
T urn the bulb holder to the left and pull it out.
F P ull the bulb out and replace it.
To refit, carry out these operations in reverse
o r d e r. F
T urn the bulb holder to the left and pull it out.
F P ull the bulb out and replace it.
To refit, carry out these operations in reverse
o r d e r.
In the event of a breakdown

133
Ion_en_Chap08_en-cas-de-panne_ed01-2016
Changing a foglamp bulb
( W21W - 21W )
F Remove the cover.
F T urn the bulb holder to the left and pull it
out.
F

P
ull the bulb out and change it.
To refit, carry out these operations in reverse
o r d e r.
Third brake lamp (W5W - 5W)
F Remove the two screws.
F P ull out the bulb-holder.
F

P
ull out the bulb and change it.
To refit, carry out these operations in reverse
o r d e r.
Changing number plate lamp
bulbs (W5W - 5W)
F Push the cover inwards.
F T urn the bulb holder and pull it out.
F

R
emove the bulb and change it.
To refit, carry out these operations in reverse
o r d e r.
8
In the event of a breakdown

134
Ion_en_Chap08_en-cas-de-panne_ed01-2016
Changing a fuse
The extraction tweezer is fitted to the back of
the fusebox cover in the dashboard (left-hand
side).
To gain access to it:
F
U
nclip the cover and remove it completely
by pulling it towards you.
F

R
emove the tweezer.
Access to tools
Before changing a fuse, the cause of the failure
must be identified and rectified.
F
C
heck that the ignition switch is in the
" LOCK " position.
F

I
dentify the faulty fuse by checking the
condition of its filament.
Changing a fuse
Good Failed
F

U

se the special tweezer to extract the fuse
from its location.
F

A

lways replace the faulty fuse with a fuse
of the same rating.
F

C

heck that the number etched on the box,
the rating etched on the top and the tables
below all agree. PEUGEOT will not accept responsibility
for the cost incurred in repairing your
vehicle or for rectifying the malfunctions
resulting from the installation of
accessories not supplied and not
recommended by PEUGEOT and
not installed in accordance with its
instructions, in particular when the
consumption of all of the additional
equipment connected exceeds
10


milliamperes.
Your vehicle's electrical system is
designed to operate with standard or
optional equipment.
Before installing other electrical
equipment or accessories in your
vehicle, contact a PEUGEOT dealer or
a qualified workshop.
In the event of a breakdown

135
Ion_en_Chap08_en-cas-de-panne_ed01-2016
Dashboard fuses
The fusebox is placed in the lower dashboard
(left-hand side).Fuse N°
Rating Functions
1 7. 5 ALeft-hand front and rear sidelamps.
2 15 AAccessory socket.
3 -Not used.
4 7. 5 AS t a r t e r.
5 20 AAudio system.
6 -Not used.
7 7. 5 AVehicle equipment, right-hand front and rear sidelamps.
8 7. 5 AElectric door mirrors.
9 7. 5 ASupervisory controller.
10 7. 5 AAir conditioning.
11 10 ARear foglamp.
12 15 ADoor locking.
13 10 ACourtesy lamp.
8
In the event of a breakdown

136
Ion_en_Chap08_en-cas-de-panne_ed01-2016
Fuse N°Rating Functions
14 15 ARear wiper.
15 7. 5 AInstrument panel.
16 7. 5 AHeating.
17 20 AHeated seat.
18 10 AOption.
19 7. 5 ADoor mirror de-icing.
20 20 AWindscreen wiper.
21 7. 5 AAirbags.
22 30 ARear de-icing.
23 30 AHeating.
24 -Non used.
25 10 ARadio.
26 15 APassenger compartment fuse.
To gain access to it:
F

U

nclip the cover and remove it completely
by pulling towards you.
In the event of a breakdown

137
Ion_en_Chap08_en-cas-de-panne_ed01-2016
Fuse N°Rating Functions
1 -Not used.
2 30 AInternal fuse.
3 40 AElectric motor.
4 40 ARadiator fan.
5 40 AElectric windows.
6 30 AVacuum pump.
7 15 AMain battery ECU.
8 15 AThird brake lamp.
9 15 AFront foglamps.
10 15 AWater pump.
Front compartment
fuses
The fusebox is placed in the front compartment
under the heating system fluid reservoir. Only
these fuses can be replaced.
The replacement of fuses for other
units (vacuum pump and 12 V
battery) requires the involvement of
a PEUGEOT dealer or a qualified
workshop.
8
In the event of a breakdown

138
Ion_en_Chap08_en-cas-de-panne_ed01-2016
Access to the fuses
F Open the bonnet.
F U nclip the cover and remove it completely
by pulling towards you.
F

C
hange the fuse.
F

W
hen you have finished, close the cover
carefully to ensure sealing of the fusebox. Fuse N°
Rating Functions
11 10 AOn-board charger.
12 10 ADirection indicators.
13 10 AHorn.
14 10 ADaytime running lamps.
15 15 ABattery fan.
16 10 AAir conditioning compressor.
17 20 ARight-hand dipped beam.
18 20 ALeft-hand dipped beam, headlamp adjusters.
19 10 ARight-hand main beam.
20 10 ALeft-hand main beam.
In the event of a breakdown