battery Peugeot iOn 2018 User Guide
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2018, Model line: iOn, Model: Peugeot iOn 2018Pages: 136, PDF Size: 5.79 MB
Page 22 of 136
20
In the event of a fault with the remote control,
you can no longer unlock or lock your vehicle.
F
F
irst of all, use the key in the driver's door
lock to unlock or lock your vehicle.
F
S
econdly, ask a PEUGEOT dealer to check
the operation of the remote control and to
replace the battery if necessary. Lost keys
See a PEUGEOT dealer with the vehicle
registration certificate and your ID.
A PEUGEOT dealer can retrieve the key
code and the transponder code to order the
replacement key.
Remote control problemAnti-theft protection
Do not make any modifications to the
electronic vehicle immobiliser system; this
could cause malfunctions.
Remote control
The high frequency remote control is a
sensitive system; do not operate it while
it is in your pocket as there is a possibility
that it may unlock the vehicle without you
being aware of it.
Do not repeatedly press the buttons of
your remote control when out of range and
out of sight of your vehicle, as it may stop
working.
The remote control does not operate when
the key is in the ignition, even when the
ignition is switched off.
Locking the vehicle
Driving with the doors locked may make
access to the passenger compartment by
the emergency ser vices more difficult in an
emergency.
As a safety precaution (with children on
board), remove the key from the ignition
when leaving the vehicle, even for a short
time. When purchasing a second-hand vehicle
Have the key codes memorised by a
PEUGEOT dealer, to ensure that the keys in
your possession are the only ones which can
start the vehicle.
Access
Page 25 of 136
23
Always remove the key from the ignition
when leaving the vehicle, even for a short
time.
In the event of contact during operation of
the electric windows, you must reverse the
movement of the window. To do this, press
the corresponding control.
When operating the passenger electric
window switches, the driver must ensure
that no-one is preventing correct closing
of the windows.
The driver must ensure that the
passengers use the electric windows
c o r r e c t l y.
Be aware of children when operating the
windows.
Charging flaps
Normal charging
F Pull control A in the lower part of the dashboard, driver's side, to unlock the
access flap.
F
O
pen the access flap on the right-hand
side of the vehicle.
F
P
ress on latch B to open the socket cover.
Fast charging
(Depending on equipment.) F
P
ull control C under the driver's seat, near
the door, to unlock the access flap.
F
O
pen the access flap on the left-hand side
of the vehicle.
F
P
ress on latch D to open the socket cover.
For more information on Recharging the
main battery , refer to the corresponding
section.
2
Access
Page 32 of 136
30
Recommendations for ventilation and air conditioning
In order for these systems to be fully effective,
follow the operation and maintenance
guidelines below:
F
I
f after an extended stop in sunshine,
the interior temperature is very high, first
ventilate the passenger compartment for a
few moments by opening the windows.
Put the air flow control at a setting high
enough to quickly change the air in the
passenger compartment.
F
T
he condensation created by the air
conditioning results in a discharge of
water under the vehicle which is per fectly
normal.
F
T
o ensure that the air is distributed evenly,
keep the external air intake grilles at the
base of the windscreen, the nozzles, the
vents, the air outlets and the air extractor
in the boot free from obstructions.
F
I
n normal conditions, use the intake
of exterior air as prolonged use of air
recirculation may cause misting of the
windscreen and side windows.
F
O
perate the air conditioning system for 5
to 10
minutes, once or twice a month to
keep it in good working order. The heating and air conditioning operate
using the energy supplied by the main
battery. Their use increases the vehicle's
consumption of electrical energy and
reduces its range.
Remember to switch off the heating or
air conditioning as soon as you judge it
to no longer be necessary.
Ventilation, heating, and air conditioning
can be activated during normal charging
of the vehicle when the ignition is set to
the ACC position.
During fast charging of the vehicle,
ventilation, heating, and air conditioning
cannot be activated.
F
E nsure that the passenger compartment
filter is in good condition and have the
filter elements replaced regularly.
F
T
o ensure correct operation of the air
conditioning system, you are also advised
to have it checked regularly.
F
I
f the system does not produce cold air,
do not use it and contact a PEUGEOT
dealer or a qualified workshop.
Ease of use and comfort
Page 37 of 136
35
Buttons
1.On/off, data transmission.
2. MODE: allows you to scroll through the
different available functions (charge start,
charge duration, thermal comfort).
3. Immediate vehicle charging (reset
programmings to zero).
4. Settings.
Display screen
1.Data transmission status indicator.
2. Recharge indicator.
3. Fault indicator.
4. Battery charge status indicator.
5. Recharge programming function status
i n d i c a t o r.
6. Charge time remaining indicator.
7. Thermal comfort function status indicator.
On/Off
Extend the aerial.
Press and hold this button to switch
the remote control on or off.
The remote control will switch off
automatically if no action takes place
within thirty seconds.
Charge start programming
This function is used to set the remaining time
before starting to charge your vehicle.
(Example: it is 7 p.m. when the system is
programmed and the programmed charge time
is two hours: charging will start at 9 p.m.).
Switch on the remote control.
This symbol is displayed on the
screen.
Use the arrows to adjust the charge start time:
each press adjusts the time in half-hourly
intervals.
Press the on/off button briefly to send the data
to the vehicle.
3
Ease of use and comfort
Page 38 of 136
36
If the charge start is programmed without
programming the charge duration, the
battery will be charged fully.
Charge duration
programming
This function is used to set the charging time
for your vehicle.
Switch on the remote control.
Press the MODE button to select the charge
duration programming.This symbol is displayed on the
screen.
Use the arrows to adjust the charging time:
each press adjusts the time in half-hourly
intervals.
Press the on/off button briefly to send the data
to the vehicle.
The charge duration can be programmed
for between 0.5 and 19.5
hours. However,
you can also select the duration "-h": in
this case, charging will stop when the
battery is fully charged. This duration is
the value entered by default. If the charge duration is programmed
without programming the start time, the
battery will be charged immediately for
a duration corresponding to the one
programmed.
Cancelling programmings
With the remote control
Press the charge immediately
button, then press the on/off button
briefly to send the data to the
vehicle.
With the switch
Turn the vehicle's ignition switch to the ON
position then turn it to LOCK .
Any programming carried out with remote
control is cancelled automatically every
time the vehicle is started.
Thermal comfort
programming
This function is used to programme the running
of the:
-
heating,
-
a
ir conditioning,
-
demisting.To programme the heating, air
conditioning or demisting functions, the
following conditions must be met.
-
T
he drive selector is in position P .
-
T
he ignition switch is on LOCK .
-
T
he vehicle is connected with the
normal recharging cable.
-
A
ll the doors are closed properly.
-
T
he battery is sufficiently charged (one
bar minimum).
For maximum efficiency in programming
the thermal comfort, make sure that all the
vehicle's windows are closed.
Ease of use and comfort
Page 39 of 136
37
One of these symbols is displayed on the
screen. It tells you the current status of the
thermal comfort.
Use the arrows to select the desired function.
Press the on/off button briefly to send the data
to the vehicle.
Available functions Function activation
Switch on the remote control.
Press the MODE button to select the thermal
comfort programming.Cooling: running the air
conditioning and ventilation in the
passenger compartment using
the central air vents.
Heating: running the heating in
the passenger compartment and
the ventilation via the inside air
vents. The driver's seat heating
will also be activated if the
function was activated. Demisting: running the
demisting/defrosting of the rear
screen and the door mirrors
(depending on version), the
ventilation and heating in the
passenger compartment, via the
side air vents, and the driver's
seat heating, if the function was
activated.
Deactivating the thermal comfort
programming function and
cancelling the programming.
Battery charge indicator
You can use the remote control to check the
main battery charge status.
Battery full.
Battery half-charged.
Battery low.
Battery empty.
Changing batteries
Batter y type: CR2032
Unclip the case and change the two batteries.
Do not throw away used batteries, take
them to an approved collection point.
3
Ease of use and comfort
Page 41 of 136
39
Charge programming
Warning/
indicator lampStateCauseAction/Observations
Flash for a few seconds. The charging cable is not connected
properly.Check the cable.
There is a problem with your electrical
installation. Have it checked by a qualified electrician.
Flashes for a few seconds. The drive selector is not in position P. Place the drive selector in position P .
Thermal comfort programming
Warning/
indicator lampState CauseAction/Observations
Flash for a few seconds. The charging cable is not connected
properly.Check the cable.
There is a problem with your electrical
installation. Have it checked by a qualified electrician.
Flash for a few seconds. The main battery is not sufficiently
charged.Charge the battery and start the
programming again.
Flashes for a few seconds. A vehicle door is still open.Close all the doors and start the
programming again.
The drive selector is not in position P . Place the drive selector in position P .
3
Ease of use and comfort
Page 46 of 136
44
Before leaving the vehicle, check that the
courtesy lamp is not still on.
If it remains permanently on, it will
discharge the ancillaries battery even if
the main battery is charged or charging.
It will then no longer be possible to start
the vehicle.
Position 3 "OFF"
The courtesy lamp is permanently off.
Lighting and visibility
Page 49 of 136
47
Emergency or assistance
call
Peugeot Connect SOS
* In accordance with the general conditions of use for the ser vice available from dealers
and subject to technological and technical
limitations.
**
A
s per the geographic coverage of
"Peugeot Connect SOS", "Peugeot Connect
Assistance" and the official national
language chosen by the owner of the vehicle.
The list of countries covered and PEUGEOT
CONNECT services is available from dealers
or on the website for your country.
In an emergency, press this
button for more than 2
seconds.
The flashing green indicator lamp and the voice
message confirm that the call has been made
to the "Peugeot Connect SOS" call centre*. Pressing this button again
immediately cancels the request.
The green indicator lamp goes
of f.
The green indicator lamp remains on (without
flashing) when communication is established.
It goes off at the end of the call. expressly declined, the call is sent directly
to the emergency services (112) without the
vehicle location.
"Peugeot Connect SOS" immediately locates
your vehicle, contacts you in your own
language** and – if necessary – requests that
relevant emergency services be dispatched**.
In countries where the ser vice is not available,
or when the locating ser vice has been If an impact is detected by the airbag
control unit, and independently of the
deployment of any airbags, an emergency
call is made automatically.
If you benefit from the Peugeot Connect
Packs offer with the SOS and assistance
pack included, there are additional
ser vices available to you in your personal
space, via the website for your country.
Operation of the system
When the ignition is switched on,
the green indicator lamp comes
on for 3
seconds indicating that
the system is operating correctly.
If the orange indicator lamp
flashes then goes off: the system
has a fault.
If the orange indicator lamp is permanently on:
the back-up battery should be replaced.
In both cases, the emergency and assistance
calls ser vice may not work.
Contact a qualified repairer as soon as
possible.
The fault with the system does not prevent
the vehicle being driven.
Peugeot Connect
Assistance
Press this button for more than
2 seconds to request assistance
if the vehicle breaks down.
A voice message confirms that the call has
been made**. Pressing this button again
immediately cancels the request.
5
Safety
Page 52 of 136
50
Excessive wheel slippage may damage
the differential of your vehicle.
Reactivation
These systems are not reactivated
automatically.
F
P
ress the button again to reactivate them
manually.
The symbol going off in the instrument panel
indicates reactivation of the ASR and DSC
systems.
Operating fault
Illumination of these warning lamps
in the instrument panel indicates
malfunction of these systems.
Contact a PEUGEOT dealer or a qualified
workshop to have the ASR /DSC systems
checked. Although the ASR /DSC systems help
improve safety in normal driving, they
should not encourage the driver to take
extra risks or drive at high speed.
The risk of loss of traction increases in
conditions of reduced grip (rain, snow,
ice). For your safety, you should therefore
keep these systems activated at all times,
particularly in poor conditions.
The correct operation of these systems
depends on observing the manufacturer's
recommendations regarding wheels (tyres
and rims), braking system components
and electronic components, as well as
assembly and repair procedures used by
the PEUGEOT dealer network.
After an impact, have these systems
checked by a PEUGEOT dealer or a
qualified workshop.
Engine brake reduction
indicator lamp
Your vehicle is equipped with a system for the
recovery of energy during deceleration which
uses the engine brake.
It recovers into the traction battery some of the
energy generated when the vehicle slows down
(e.g. on a long descent) to improve the range
of the battery and so the distance that can be
travelled between charges.
When the traction battery has been charged
fully and for the first few miles (or kilometres) of
use of the vehicle, the engine brake is reduced
temporarily.
This indicator lamp flashes on the
instrument panel, inviting you to
adapt your driving accordingly.
We therefore recommend that you anticipate
your braking as much as possible: use the
brake pedal to slow down or stop the vehicle.
Safety