reset Peugeot iOn 2018 User Guide

10
QUESTIONRESPONSESOLUTION
There is a difference in sound quality between
the different audio sources (radio, CD, etc.). For optimum sound quality, the audio settings
(volume, bass, treble, ambience, loudness)
can be adapted to the different sound sources,
which may result in audible differences when
changing source (radio, CD, etc.).Check that the audio settings (volume, bass,
treble, ambience, loudness) are adapted to
the sources being listened to. It is advisable to
set the AUDIO functions (bass, treble, front-
rear balance, left-right balance) to the middle
position, select the musical ambience and set
the loudness correction to the "Active" position
in CD mode or to the "Inactive" position in radio
mode.
When changing the settings for treble and bass,
the ambience setting is deselected.
When changing the ambience setting, treble
and bass are reset to zero. Choosing an ambience imposes settings for
treble and bass. Modifying one without the other
is only possible with a personalised ambience.
Modify the treble and bass settings or the
ambience setting to obtain the desired sound
quality.
When changing the balance setting, distribution
is deselected. Choosing the "driver" distribution setting
imposes a balance setting.Modify the balance or distribution settings to
obtain the desired sound quality.
The reception quality of the tuned radio station
gradually deteriorates or the stored stations are
not working (no sound, 87.5
MHz is displayed...).The vehicle is too far from the transmitter of
the station or no transmitter is present in the
geographical area. Activate the RDS function and search for the
station again to enable the system to check
whether there is a more power ful transmitter in
the geographical area.
The surroundings (hills, buildings, tunnels,
underground car park, etc.) are blocking
reception, including in RDS tracking mode. This phenomenon is normal and does not
indicate a failure of the audio equipment.
The aerial is missing or has been damaged (for
example when going through a car wash or into
an underground car park). Have the aerial checked by a PEUGEOT dealer.
Bluetooth® audio system

1
1
2
1
2
KENWOOD – KDC-X7000DAB
As a safety measure, the vehicle must
be stationary when the driver carries
out operations that require sustained
attention.Short press: on.
Long press: off.
Rotate: set the audio volume,
navigate in a list.
Press: confirm.
Change the audio source.
Short press: accept an incoming
call, switch between two calls, enter
Bluetooth mode.
Long press: smartphone voice
commands via the system.
Short press: find a ser vice.
Long press: update list of stations
received.
Abandon the current operation.
Go up one level in the menu.
Reject or end a call.Select an analogue band FM1/FM2/
FM 3 / M W/ LW.
Select a digital band DB1/DB2/DB3.
Navigate in a list.
Change the search method
(automatic or manual).
Fit the control panel.
Remove the control panel. Short press: find a radio station,
frequency or service, find the
previous/next track or file, navigate
in a list.
Long press: fast for ward or rewind.
Short press: select a preset radio
station.
Long press: add a radio station to
presets.
For more information, refer to the KENWOOD
user guide provided with the system.
.
KENWOOD - KDC-X7000DAB