change time Peugeot iOn 2018 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2018, Model line: iOn, Model: Peugeot iOn 2018Pages: 136, PDF Size: 5.79 MB
Page 74 of 136

72
Reinitialisation of the system is done via the
display screen of the instrument panel, with the
ignition on and the vehicle stationary.
F
P
ress button A to select the system.
F
T
o reinitialise the under-inflation detection
system press button A and hold it down for
at least 3
seconds.
The flashing of the warning lamp in the
instrument panel confirms that the system has
been reinitialised.
The warning lamp will then go off after driving
for about a hundred metres.
The under-inflation alert can only be relied
on if the reinitialisation of the system has
been done with the pressures in the four
tyres correctly adjusted.
Malfunction
The flashing and then fixed
illumination of the under-inflation
warning lamp indicates a fault with
the system.
In this case, the pressure in the tyres is no
longer monitored.
This alert is also displayed if:
-
o
ne or more wheels is not fitted with a
sensor,
-
t
here is a wireless device using the same
frequency near the vehicle,
-
t
here is snow or ice build-up in the wings or
in the rims,
-
t
he tyre pressure monitoring system battery
charge level is insufficient,
-
t
he wheel sensor identifiers have not been
logged by a PEUGEOT dealer or a qualified
workshop.
Go to a PEUGEOT dealer or a qualified
workshop
to have the system checked or,
following a puncture, to have the original
wheel, equipped with a sensor, refitted
with a tyre. Any tyre repair or replacement on a wheel
fitted with this system must be carried
out by a PEUGEOT dealer or a qualified
workshop.
If you fit the second set of tyres stored
in the system, the malfunction alert will
appear until this second set is selected in
the configuration menu.
Managing sets of tyres
If you have registered a second set of tyres with
a PEUGEOT dealer or a qualified workshop,
every time the set of tyres is changed (e.g.
"winter" tyre), select the set you have just
installed in the configuration menu.
Once the new set has been fitted, check
and adjust the pressure to the value stated
on the tyre pressure label.
For more information on the
Identification markings , refer to the
corresponding section.
The other set of tyres is selected via the
instrument panel display screen, with the
ignition on and the vehicle stationary.
Driving
Page 115 of 136

3
Select or deselect "RDS " to switch
RDS on or off.
Confirm with " OK" to save the
setting.
Receiving TA messages
The TA (Traffic Announcement) function
gives priority to TA alert messages.
To operate, this function needs good
reception of a radio station transmitting
this type of message. When a traffic
report is transmitted, the current audio
source (radio, CD, USB, etc.) is interrupted
automatically to play the TA message.
Normal playback resumes at the end of
the transmission of the message.
Press MENU .
Select "Radio ".
Select or deselect " TA" to activate
or deactivate the reception of traffic
messages.
Confirm with " OK" to save the
setting.
Displaying RADIO TEXT
Radio Text is information transmitted by
the radio station related to the current
programme or song.
With the radio displayed on the
screen, press MENU .
Select " Radio".
Select or deselect " TXT" to activate
or deactivate the display of Radio
Te x t .
Confirm with " OK" to save the
setting.
Media
USB port
This unit comprises a USB port and a jack
socket, depending on model. The system constitutes playlists (in
temporary memory), whose creation time
can be from a few seconds to several
minutes at the first connection.
Limiting the number of non-music files and
the number of folders reduces this waiting
time. The playlists are updated every
time the ignition is switched off or a USB
memory stick is connected.
The lists are memorised: if there is no
change in the lists, the next loading time
will be shorter.
Connect a USB memory stick to the USB port
or connect a USB device to the USB port using
a suitable cable (not supplied). To protect the system, do not use a USB
hub. Press SRC/TEL repeatedly to select
" USB ".
Press one of these buttons to select
the previous or next track in the list.
.
Bluetooth® audio system