tow Peugeot iOn 2018 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2018, Model line: iOn, Model: Peugeot iOn 2018Pages: 136, PDF Size: 5.79 MB
Page 5 of 136
3
.
bit.ly/helpPSA
.
Access to additional videos
Driving recommendations 68
Starting-switching off the vehicle 6 8
Parking brake
6
9
Drive selector
6
9
Tyre under-inflation detection
7
0
Recharging the main battery
7
5
Snow chains
8
2
Bonnet
8
3
Front compartment
8
4
Rear compartment
8
4
Checking levels
8
5
Checks
86
Changing a wiper blade
8
7
Washing precautions
87A
ncillaries battery 8 8
Temporary puncture repair kit 9 0
Spare wheel
9
3
Changing a bulb
9
5
Changing a fuse
1
01
Towing the vehicle
1
05
Motor and main battery
1
06
Weights
10
7
Dimensions
1
08
Identification markings
1
09
Driving
Practical information In the event of a breakdown
Technical data Alphabetical index
Bluetooth® audio system
KENWOOD – KDC-X7000DAB
Audio equipment and telematics
.
Contents
Page 15 of 136
13
Warning/indicator lampStateCause Action/Observations
Left-hand direction
indicator Flashing with audible
signal. The lighting control stalk has been moved
down.
Right-hand
direction indicator Flashing with audible
signal. The lighting control stalk has been moved
up.
Hazard warning
lamps Flashing with audible
signal. The hazard warning lamps switch, located
on the dashboard, has been operated.
The left-hand and right-hand direction indicators and
their associated lamps flash simultaneously.
Sidelamps and/
or dipped beam
headlampsFixed.
The sidelamps and/or dipped beam
headlamps have been switched on.
Front foglamps Fixed. The front foglamps have been switched on
using the ring on the lighting control stalk. Turn the ring on the lighting control stalk
twice rear wards to switch off the front
foglamps.
Main beam
headlamps Fixed.
The lighting control stalk has been pulled
towards you. Pull the lighting control stalk to return to
dipped beam headlamps.
Motor braking
reduction Flashing.
The main battery is fully charged, the motor
braking is temporarily reduced. Anticipate when you need to brake: use
the brake pedal to slow down or stop the
vehicle.
Ready
(ready to drive)
Fixed, accompanied by
an audible signal when
it comes on.The vehicle is ready to drive, you can
operate the accelerator now.
The lamp stays on as long as the vehicle is
powered up.
Green warning/indicator lamps
Black warning/indicator lamps Blue warning/indicator lamps
1
Dashboard instruments
Page 21 of 136
19
Remote control key
System used to lock or unlock the vehicle's
central locking system with a key or remotely.
It also starts the vehicle and provides anti-theft
protection.
Unfolding/folding the key
F Press button A to unfold or fold the key.
Unlocking the vehicle
Unlocking using the remote
control
F Press the open padlock button to unlock the vehicle.
Unlocking is confirmed by illumination of the
interior courtesy lamp for about 15
seconds
and the direction indicators flashing twice.
Unlocking using the key
F Turn the key towards the right in the
driver's door lock to unlock the vehicle.
Unlocking is confirmed by illumination of the
interior courtesy lamp for about 15
s
econds and
the direction indicators flashing twice .
However, the door mirrors do not unfold.
The passenger door lock does not allow
the locking or unlocking of the other doors
and/or of the boot.
The vehicle will lock again automatically
after thirty seconds unless a door or the
boot is opened. This mechanism helps
avoid unlocking by mistake.
Locking the vehicle
The door mirrors unfold at the same time
(depending on version).
Normal locking using the remote
control
F Press the closed padlock button to lock the vehicle. Locking is confirmed by the direction indicators
flashing once
.
The door mirrors fold at the same time
(depending on version).
Normal locking using the key
F Turn the key towards the left in the driver's door lock to lock the vehicle.
Locking is confirmed by the direction indicators
flashing once .
However, the door mirrors do not fold.
Anti-theft protection
Electronic immobiliser
The key contains an electronic chip which has
a specific code. When the ignition is switched
on, this code must be recognised to enable the
vehicle to start.
This electronic immobiliser locks the motor
management system a few minutes after the
ignition is switched off and prevents the engine
being started by anyone who does not have
t h e key.
In the event of a fault, or if your vehicle does
not start, contact a PEUGEOT dealer as soon
as possible.
2
Access
Page 45 of 136
43
Windscreen wipers
A.Wiping speed control lever: raise
or lower the lever to the desired
position.
Single wipe.
Of f.
Intermittent (manually adjustable
speed).
Slow.
Fast.
B. Intermittent adjustment ring.
F
T
urn this ring to increase or
decrease wiping frequency in
intermittent mode.
Front screenwash
Pull the wiper control stalk towards you. The
screenwash and then the wipers operate for a
preset time.
Rear wiper
C. Rear wiper selection ring.
Of f.
Intermittent wiping.
The wiper wipes twice then switches to
intermittent mode with an inter val of a few
seconds. Wash-wipe.
Hold the ring in this position to operate the
screenwash and to carry out several wipes with
the wipers.
Courtesy lamp
Position 1 "ON"
The courtesy lamp is permanently on.
Position 2 "●"
The courtesy lamp comes on when a door or
the boot is opened; when the door or boot is
closed again, the lighting dims gradually for a
few seconds before going out.
However, the courtesy lamp goes out
immediately when the doors and boot are
closed and you lock the vehicle from the inside
or with the remote control.
4
Lighting and visibility
Page 56 of 136
54
Airbags
The airbags do not operate when the
ignition is switched off.
This equipment will only deploy once. If a
second impact occurs (during the same or
a subsequent accident), the airbag will not
be deployed again.
Impact detection zones
A.Front impact zone.
B. Side impact zone.
Airbag deployment generates slight
smoke emissions and a noise, due to the
activation of the pyrotechnic cartridge
incorporated in the system.
This smoke is not harmful, but sensitive
individuals may experience slight irritation.
The detonation noise associated with the
deployment of an air bag may result in a
slight loss of hearing for a short time.
The airbags are designed to help enhance the
safety of occupants in the event of a serious
collision. They complement the action of the
safety belts equipped with force limiters.
If a collision occurs, the electronic detectors
record and analyse the front and side impacts
sustained in the impact detection zones:
-
i
f there is a violent impact, the airbags
deploy instantly and help better protect
occupants of the vehicle; immediately after
the impact, the airbags deflate rapidly
in order not to hinder the visibility or the
possible exit of the occupants.
-
i
n the case of a minor or rear impact or in
certain roll-over conditions, the airbags
may not be deployed; the seat belt
alone contributes towards ensuring your
protection in these situations.
Front airbags
This system protects the driver and front
passenger from the risk of injury to the head
and chest in the event of a severe frontal
impact.
The driver's airbag is fitted in the centre of the
steering wheel; the front passenger's airbag is
fitted in the dashboard above the glove box.
Activation
The airbags are deployed (except the
passenger's front airbag if it is deactivated) in
the event of a severe frontal impact to all or part
of the frontal impact zone A , in the longitudinal
centreline of the vehicle on a horizontal plane
and directed from the front to the rear of the
vehicle.
The front airbag inflates between the front
occupant of the vehicle and the dashboard, to
cushion their forward movement.
Safety
Page 57 of 136
55
Malfunction
If this warning lamp comes on in the
instrument panel, contact a
PEUGEOT dealer or a qualified
workshop without delay to have the
system checked. The airbags may
no longer be deployed in the event
of a serious impact.
In this case, do not install a child
seat nor allow a passenger to sit in
the front passenger seat.
Lateral airbags
This system protects the driver and front
passenger in the event of a severe side impact
to minimise the risk of injury to the chest,
between hip and shoulder.
Each lateral airbag is fitted in the seat backrest
frame, door side.
Deployment
A lateral airbag is deployed unilaterally in the
event of a severe side impact applied to all or
part of side impact zone B, perpendicular to
the longitudinal centreline of the vehicle on a
horizontal plane and directed from the outside
towards the inside of the vehicle.
The lateral airbag inflates between the hip
and shoulder of the front occupant and the
corresponding door trim panel.
Impact detection zones
A. Front impact zone.
B. Side impact zone.
Curtain airbagsThis system protects the driver and passengers
in the event of a severe lateral impact in order
to limit the risk of injury to the head.
Each curtain airbag is built into the pillars and
the upper passenger compartment area.
Deployment
Each curtain airbag is deployed at the same
time as the corresponding lateral airbag in the
event of a serious side impact applied to all or
part of the side impact zone B , perpendicular
to the longitudinal centreline of the vehicle on a
horizontal plane and directed from the outside
towards the inside of the vehicle.
The curtain airbag inflates between the front or
rear occupant of the vehicle and the windows.
Malfunction
If this warning lamp comes on in the
instrument panel, contact a PEUGEOT
dealer or a qualified workshop to have
the system checked. The airbags may
no longer be deployed in the event of a
serious impact.
In the event of a minor impact or bump on
the side of the vehicle or if the vehicle rolls
over, the airbag may not be deployed.
In the event of a rear or front collision, the
airbag is not deployed.
5
Safety
Page 65 of 136
63
(e)When a rear ward facing child seat is
installed on the front passenger seat , it
is essential to deactivate the passenger’s
airbag. Otherwise, the child would risk
being seriously injured or killed if the
airbag were deployed . When a for ward
facing child seat is installed on the front
passenger seat , the passenger's airbag
must remain activated.
U: Seat suitable for the installation of a
child seat secured using a seat belt and
universally approved, rearward facing
and/or forward facing.
X: Seat not suitable for the installation of a
child seat of the weight group indicated.
Remove and stow the head restraint
before installing a child seat with backrest
on a passenger seat. Refit the head
restraint once the child seat has been
removed.ISOFIX mountings
Your vehicle has been approved in accordance
with the latest ISOFIX regulation.
The seats shown below are fitted with ISOFIX
compliant mountings:
There are three rings for each seat:
-
t
wo rings A , located between the vehicle's
seat backrest and cushion, indicated by a
marking, -
a r
ing B, for fixing the upper strap, called
TOP TETHER and located in the boot.
Its position is indicated by a marking.
The TOP TETHER is used to secure the upper
strap of child seats that have them. This device
limits for ward tipping of the child seat, in the
event of a front impact.
This ISOFIX mounting system provides fast,
reliable and safe fitting of the child seat in your
vehicle.
The ISOFIX child seats are fitted with two
latches which are secured to the two rings A .
Some also have an upper strap which is
attached to ring B .
5
Safety
Page 67 of 136
65
Summary table of ISOFIX child seat locations
In line with European regulations, this table indicates the options for installing ISOFIX child seats on the vehicle seats fitted with ISOFIX mountings.
In the case of universal and semi-universal ISOFIX child seats, the ISOFIX size category, determined by a letter from A to G, is indicated on the child
seat next to the ISOFIX logo.
Weight of the child/indicative age
Under 10
kg
(group
0)
Up to about 6 months old Under 10
kg (group 0)
Under 13
kg (group 0+)
Up to about 1 year old 9-18
kg (group 1)
From about 1 to 3 years old
Type of ISOFIX child seat Carr y- cot*"Rearward facing " "Rearward facing " "Forward facing "
ISOFIX size categor y F G C D E C D A B B1
ISOFIX universal and semi-
universal child seats which can be installed on the rear outer seats X
X X RÖMER
BabySafe Plus
ISOFIX X X
IUF
*
C
arry-cots and car beds cannot be installed
on the front passenger seat.
I UF:
seat suitable for the installation of an
Isofix U niversal seat, " For ward facing",
secured using the top tether.
X: seat which is not suitable for the
installation of an ISOFIX seat of the size
category indicated. Remove and stow the head restraint
before installing a child seat with backrest
on a passenger seat. Refit the head
restraint once the child seat has been
removed.
5
Safety
Page 72 of 136
70
Starting the vehicle
With the engine running, P appears on the
instrument panel display screen.
F
P
ress the brake pedal to exit position P .
F
S
elect for ward drive ( D) or reverse ( R).
F
R
elease the parking brake.
Switching off the vehicle
To switch off the engine, select position P .
You must without fail apply the parking brake to
immobilise the vehicle.
To remove the key from the ignition, the drive
selector must be in position P .
To tow your vehicle, the drive selector
must be in position N .
For more information on Towing the
vehicle , refer to the corresponding
section.
Tyre under-inflation
detection
System which automatically checks the
pressures of all four tyres from when the
ignition is switched on.
The pressure sensors are located in the valves
of each tyre.
The system triggers an alert as soon as
it detects a drop in the pressure of one or
more tyres by comparison with the reference
pressure stored in the system. This reference
pressure must be reinitialised after every tyre
pressure adjustment or wheel change.
The system operates provided that the
sensor identifiers have been first logged by a
PEUGEOT dealer or a qualified workshop.
You can log two sets of tyres (for example:
wheels with "all weather" tyres and wheels with
"winter" tyres).
The tyre under-inflation detection system
is a driving aid which does not replace the
need for vigilance on the part of the driver.
F Take your foot off the brake pedal, and the vehicle will move at a low speed to make
manoeuvring easier.
F
A
ccelerate to move for ward or backward.
F
"D " or " R" appears on the instrument panel
display screen.
Driving
Page 88 of 136
86
Rear compartment
Coolant level
The level of this fluid must be
between the "L" (MIN) and "F"
(MA X) marks.
As the cooling system is pressurised, wait at
least one hour after switching off the motor
before carrying out any work.
To avoid any risk of burns, unscrew the cap by
two turns to allow the pressure to drop. When
the pressure has dropped, remove the cap and
top up the level.
Changing the fluid
This fluid does not need to be changed.
Checks
Passenger compartment filter
Depending on the environment
(e.g. dusty atmosphere) and the
use of the vehicle (e.g. city driving),
replace it twice as often if
necessary .
A clogged passenger compartment filter may
have an adverse effect on the per formance
of the air conditioning system and generate
undesirable odours.
Brake pads
Brake wear depends on the style
of driving, particularly in the case
of vehicles used in town, over short
distances. It may be necessary to
have the condition of the brakes
checked, even between vehicle
services.
Ancillaries battery electrolyte
level
To check this level, you must remove the
battery cover.
For more information on the ancillaries
battery , refer to the corresponding section.
The level of this fluid must be between the
"LOWER LEVEL" (MIN) and "UPPER LEVEL"
(MA X) marks.
If necessary, top up with distilled water by
removing the plugs from the battery’s different
compartments.
Check the electrolyte level at least once
a month. Unless otherwise indicated, check these
components in accordance with the
manufacturer's service schedule.
Other wise, have them checked by a PEUGEOT
dealer or a qualified workshop. Unless there is a leak in the circuit, a drop in
the brake fluid level indicates that the brake
pads are worn.
Brake disc/drum wear
For information on checking
brake disc/drum wear, contact a
PEUGEOT dealer or a qualified
workshop.
Practical information