headlamp Peugeot Partner VP 2004 User Guide

22-12-2003
CHECKING THE LEVELS Oil level Check the level regularly and top
up between changes. The maxi-mum consumption is 0.5 l per600 miles (1000 km). Check the level with the vehicle level, engine cold, using the oillevel gauge on the instrumentpanel or the dipstick.
Dipstick There are two marks on the dipstick: A= maximum
Never fill past this mark. B = minimum
To maintain the reliability of engines and emissioncontrol systems, the useof additives in engine oilis prohibited.
PRACTICAL INFORMATION 97
Viscosity selection In all cases, the oil selected must meet the manufacturer's require-ments. Brake fluid level:
- The level must always be bet-
ween the DANGER and MAXI-
MUM marks in the reservoir.
- If the level drops substantially, contact a PEUGEOT dealer
immediately.
Fluid change:
- must be carried out according to the manufacturer's servicing schedule.
- use fluids recommended by the manufacturer, which fulfil DOT4standards.
Note: brake fluid is harmful to
health and very corrosive. Avoid allcontact with the skin. Cooling system Use the fluid recommended by the
manufacturer. When the engine is warm, the tem- perature of the coolant is controlled
by the engine fan. As this fan canoperate with the ignition key remo-ved and because the cooling systemis pressurised, wait for at least onehour after the engine has stoppedbefore carrying out any work. Slacken the cap to the first notch torelease the pressure to prevent anyrisk of scalding. When the pressurehas dropped, remove the cap andtop up the level. Note:
the coolant does not need to
be changed. Used oil Do not dispose of used oil, brake fluid or coolant into drains or into theground. Power steering reservoir  Open the reservoir, with the engine at ambient temperature.The level should always beabove the MIN. mark and closeto the MAX. mark.
Windscreen and headlamp*wash level For best quality cleaning and for
your safety, we would advise thatyou use products recommended by
PEUGEOT.
* According to destination.
Oil change According to the information given in
"PEUGEOT SERVICING" .
Note: avoid used oil coming into
prolonged contact with the skin.

22-12-2003
PRACTICAL INFORMATION
102
CHANGING A BULB Front lights
1 - Dipped beam headlamps / Main beam headlamps
(H4-60/55W)
- Turn and remove the protector A.
- Disconnect the connector.
- Unclip the spring.
- Remove and replace bulb. 2 - Side lights (W 5 W)
- Turn and remove the protector
A.
- Pull the bulb holder rearwards.
- Change the bulb.
3 - Direction indicators (PY 21 W amber)
- Turn the bulb holder Ba quarter turn and remove it.
- Change the bulb. Note: in certain weather conditions (low temperatures,
humidity), the presence of condensation on the inside
of the headlamp glass is normal ; it disappears a few
minutes after the lights have been switched on.

22-12-2003
Direction indicator side repeaters
(WY 5 W amber)
- Push the transparent cover forwards or rearwards and release it.
- Turn the bulb holder a quarter turn.
- Change the bulb.
Coloured bulbs (direction indicators and side repeaters) must be repla-ced by bulbs of identical
specification and colour.
Only use H4 bulbs manu-factured by: - GE/TUNGSRAM,- PHILIPS,- OSRAM,
to avoid damaging the head- lamps. These meet the anti-UV (ultra- violet) specifications necessaryfor the correct operation and reliability of the headlamps. The headlamps are fitted with a polycarbonate lens coated with
a protective varnish. You arestrongly advised to avoid cleaningthem using a dry or abrasive clothand using detergent products orsolvents. Use a soft, damp cloth.
PRACTICAL INFORMATION 103

PRACTICAL INFORMATION109
22-12-2003
Fuse N¡ Rating
Functions
1 10A Pre-heat unit (diesel) - Brake and clutch switches - Reversing light.
2 15A Fuel pump.
3 10A ABS control unit or ESP control unit.
4 10A Engine control unit.
5- Not used.
6 15A Front fog lamps.
7 20A Headlamp wash pump.
8 20A Fan assembly relay - Engine control unit.
9 15A Left-hand dipped beam.
10 15A Right-hand dipped beam.
11 10A Left-hand main beam.
12 10A Right-hand main beam.
13 15A Horns.
14 10A Front and rear windscreen wash pumps.
15 30A Oxygen sensor - Air flow sensor.
16 30A Air pump relay.
17 30A Front windscreen wiper.
18 40A Air conditioning fan.