bonnet Peugeot RCZ 2011 Owner's Manual
[x] Cancel search | Manufacturer: PEUGEOT, Model Year: 2011, Model line: RCZ, Model: Peugeot RCZ 2011Pages: 276, PDF Size: 51.24 MB
Page 4 of 276
CONTENTS
2
ECO-DRIVING 20-21
Direction indicators 99
Hazard warning lamps 99
Emergency or assistance call 100
Horn 100Tyre under-inflation detection 100
Braking assistance systems 102
Trajectory control systems 103
Active bonnet 105Active spoiler 106
Front seat belts 108
Airbags 111
Child seats 116 Front seats 63
Steering wheel adjustment 67
Mirrors 68
Rear seats 71
Ventilation 72Dual-zone digital air conditioning 74
Rear screen demist - defrost 76
Courtesy lamp 77
Interior mood lighting 78Interior fittings 80
Front armrest 83
Boot fittings 86
Lighting controls 88
Automatic illumination of headlamps 92Headlamp adjustment 93
Directional lighting 94Wiper controls 95
Automatic rain sensitive wipers 97
FAMILIARISATION 4-19
1/INSTRUMENTS AND CONTROLS 22-49
2/ACCESS 50-62
3/EASE OF USE AND COMFORT 63-87
4/VISIBILITY 88-98
5/SAFETY 99-123
Remote control key 50
Alarm 54Electric windows 57
Doors 59Boot 62 Instrument panels 22
Warning and indicator lamps 26
Indicators 33Instrument panel buttons 37
Clock 38
Trip computer 39
Monochrome screen C (Peugeot Connect Sound) 4216/9 high defi nition retractable colour screen
(Peugeot Connect Media) 46
Page 5 of 276
CONTENTS
Steering lock - Starting 124
Parking brake 125
Hill start assist 126Manual gearbox 127
Gear shift indicator 128
Automatic gearbox 129Speed limiter 133
Cruise control 136
Parking sensors 139
Fuel tank 143
Bonnet 145
Petrol engines 146Diesel engine 147
Running out of fuel (Diesel) 148
Checking levels 149Checks 151
Temporary puncture repair kit 153
Changing a wheel 160
Changing a wiper blade 164Energy economy mode 165
Battery 166
Changing a bulb 168
Changing a fuse 175Towing a vehicle 182
Towing a trailer 184
Cleaning and maintenance 186
Accessories 187
6/DRIVING 124-141
7/CHECKS 142-152
8/PRACTICAL INFORMATION 153-188
ALPHABETICAL INDEX 261-265
VISUAL SEARCH 266-269
Petrol engines 189
Weights (petrol) 190Diesel engine 191
Weights (Diesel) 192Dimensions 193
Identification markings 194
9/TECHNICAL DATA 189-194
Emergency or assistance 195 Peugeot Connect Media 199 Peugeot Connect Sound 243
10/AUDIO EQUIPMENT AND TELEMATICS 195-260
Page 10 of 276
509
0
13
001
/
2
1
C
HE
CK/
000
8
INSTRUMENTS AND CONTROLS
1.
Cruise control/speed limiter switches.
2.
Steering wheel adjustment control.
3.
Lighting and direction indicators control
stalk.
4.
Instrument panel.
5.
Driver's airbag.
Horn.
6.
Gear lever.
7.
Parking brake.
8.
Bonnet release.
9.
Fusebox.
10.
Manual headlamp height adjustment.
11 .
Side adjustable air vent.
12.
Speaker (tweeter).
Page 30 of 276
28
Engine
autodiagnosis
system
fl ashing. The engine management system
has a fault. Risk of destruction of the catalytic converter.
Have it checked by a PEUGEOT dealer or a qualifi ed workshop.
fi xed. The emission control system has
a fault. The warning lamp should go off when the engine is started.
If it does not go off, contact a PEUGEOT dealer or qualifi ed
workshop without delay.
Low fuel level
fi xed with the
needle in the
red zone,
accompanied by
an audible signal
and a message. When it fi rst comes on there
remains approximately 5 litres
of
fuel in the tank.
At this point, you begin to use the
fuel reserve. Refuel as soon as possible to avoid running out of fuel.
Until suffi cient fuel has been added, this warning lamp
will come on every time the ignition is switched on,
accompanied by an audible signal and a message.
The audible signal and message are repeated with
increasing frequency as the fuel level drops towards "0"
.
Fuel tank capacity : approximately 55 litres
.
Never continue to drive until you run out of fuel, as this
could damage the emission control and injection systems.
Warning lamp
is on
Cause
Action/Observations
Service
temporarily,
accompanied by
a message. Minor faults have occurred for
which there is no specifi c warning
lamp. Identify the fault by reading the message displayed in the
screen:
- doors, boot or bonnet open,
- low engine oil level,
- low screenwash/headlamp wash reservoir level,
- remote control battery fl at,
- low tyre pressures,
- saturation of the particle emission fi lter on Diesel vehicles
(see Checks - checking levels/particle emissions fi lter).
For any other faults, contact a PEUGEOT dealer or a
qualifi ed workshop.
fi xed,
accompanied by
a message and
an audible signal. Major faults have occurred for
which there is no specifi c warning
lamp. Identify the fault by reading the message shown in the
screen and you must then contact
a PEUGEOT dealer or
a qualifi ed workshop.
Page 56 of 276
54
ALARM *
System which protects and provides a deterrent against theft and break-
ins. It provides the following types of monitoring.
- Exterior perimeter
The system checks for opening of the vehicle.
The alarm is triggered if anyone tries to open a door, the boot, the
bonnet...
- Interior volumetric
The system checks for any variation in the volume in the passenger
compartment.
The alarm is triggered if anyone breaks a window, enters the passenger
compartment or moves inside the vehicle.
- Tilt
The system checks for any change in the attitude of the vehicle.
The alarm is triggered if the vehicle is lifted, moved or knocked.
For all work on the alarm system, contact a PEUGEOT dealer or a
qualifi ed workshop.
LOCKING THE VEHICLE WITH FULL ALARM
SYSTEM
Activation
)
Switch off the ignition and get out of the vehicle.
)
Press the locking button on the remote control.
The monitoring system is active: the indicator lamp in the button fl ashes
once per second.
After the locking button on the remote control is pressed, the exterior
perimeter monitoring is activated after a delay of 5 seconds and the
interior volumetric and anti-tilt monitoring after a delay of 45 seconds.
Deactivation
)
Press the unlocking button on the remote control.
The alarm system is deactivated: the indicator lamp in the button goes off.
Self-protection function
The system checks for the putting out of service of its
components.
The alarm is triggered if the battery, the central control or the siren
wiring are put out of service or damaged.
*
According to country. If an opening (door, boot...) is not closed fully, the vehicle is not
locked but the exterior perimeter monitoring will be activated after
a delay of 45 seconds at the same time as the interior volumetric
and anti-tilt monitoring.
Page 107 of 276
5/
SAFETY
ACTIVE BONNET
Operating fault
The active bonnet has been designed to maximise the safety of
pedestrians in the event of an impact with the front of the vehicle.
The triggering of the active bonnet is accompanied by a slight
emission of harmless smoke and a noise, due to the activation
of the pyrotechnic cartridge integrated in the system. The airbag
warning lamp comes on.
After triggering, close the bonnet by pressing on the hinges.
Go to the nearest PEUGEOT dealer or a qualifi ed workshop at a
maximum speed of 20 mph (30 km/h). This equipment can only be triggered once. If a second impact
occurs (during the same or a subsequent accident), the active
bonnet will not be triggered.
After an accident or theft of the vehicle, have the system checked.
Do not handle the pyrotechnic systems, located under the bonnet
near the struts: risk of explosion.
All work on this system is strictly prohibited unless carried out by
skilled personnel of a PEUGEOT dealer or a qualifi ed workshop.
If this warning lamp comes on on the instrument panel,
accompanied by an audible signal and a message in the
screen, contact a PEUGEOT dealer or a qualifi ed workshop to
have the system checked. The active bonnet may no longer
be triggered in the event of an impact.
Page 147 of 276
7/
CHECKS
BONNET
OPENING
)
Open the front left door.
)
Pull the interior release lever A
, located at the bottom of the door
aperture.
CLOSING
)
Lower the bonnet and release it at the end of its travel.
)
Pull on the bonnet to check that it is fully latched.
)
Push the exterior safety catch B
to the left and raise the bonnet.
The bonnet is held open by the two side struts.
The location of the interior release lever prevents opening of the
bonnet while the front left door is closed.
When the engine is hot, handle the safety catch with care
(risk of burns).
Page 150 of 276
148
2 LITRE HDI ENGINE
)
Fill the fuel tank with at least fi ve litres of Diesel.
)
Open the bonnet.
)
Unclip the style cover for access to the priming pump.
)
Slacken the bleed screw.
)
Squeeze and release the priming pump repeatedly until fuel
appears in the transparent pipe with the green connector.
)
Retighten the bleed screw.
)
Operate the starter until the engine starts.
)
Put the style cover back in position and clip it in place.
)
Close the bonnet.
RUNNING OUT OF FUEL (DIESEL)
If the engine does not start fi rst time, don't keep trying.
Operate the priming pump again, then the starter motor. On vehicle fi tted with HDi engines, the fuel system must be primed if
you run out of fuel; refer to the engine compartment view on the "Diesel
engine" page.
Page 151 of 276
7/
CHECKS
CHECKING LEVELS
Check all of these levels regularly and top them up if necessary, unless
otherwise indicated.
If a level drops signifi cantly, have the corresponding system checked by
a PEUGEOT dealer or a qualifi ed workshop.
OIL LEVEL
The check is carried out either when the ignition is switched
on using the oil level indicator on the instrument panel, or
using the dipstick.
This manual check will only be correct if the vehicle is on level ground
and the engine has been off for more than 30 minutes.
After topping up the oil, the check when switching on the ignition
with the oil level indicator in the instrument panel will only be valid
30 minutes after topping up.
It is normal to top up the oil level between services. PEUGEOT
recommends that you check the oil level and top up if necessary
every 3 000 miles (5 000 kilometres).
Engine oil change
Refer to the Warranty and Maintenance Record for details of the interval
for this operation.
In order to maintain the reliability of the engine and emission control
system, the use of additives in the engine oil is prohibited.
BRAKE FLUID LEVEL
The brake fl uid level should be close to the "MAX" mark. If it is
not, check the brake pad wear.
Changing the fluid
Refer to the Warranty and Maintenance Record for details of the interval
for this operation.
Fluid specification
The brake fl uid must conform to the manufacturer's recommendations
and meet the DOT4 standard.
POWER STEERING FLUID LEVEL
The power steering fl uid level should be close to the "MAX"
mark. Unscrew the cap, with the engine cold, to check the level.
When working under the bonnet, take care, as certain areas of the
engine may be extremely hot (risk of burns).
Oil specification
The oil must be the correct grade for your engine and conform to the
manufacturer's recommendations.
Page 168 of 276
166
BATTERY
The battery is located under the bonnet.
For access to it:
)
open the bonnet using the interior release lever, then the exterior
safety catch,
)
remove the plastic cover for access to the two terminals,
)
wait 2 minutes after switching off the ignition before disconnecting
the battery,
)
unclip the fusebox to remove the battery, if necessary.
STARTING USING ANOTHER BATTERY
)
Connect the red cable to the positive terminal (+) of the fl at
battery A
, then to the positive terminal (+) of the slave battery B
.
)
Connect one end of the green or black cable to the negative
terminal (-) of the slave battery B
.
)
Connect the other end of the green or black cable to the earth
point C
on the broken down vehicle.
)
Operate the starter, let the engine run.
)
Wait until the engine returns to idle and disconnect the cables.
ACCESS TO THE BATTERY
The batteries contain harmful substances such as sulphuric
acid and lead. They must be disposed of in accordance with
regulations and must not, in any circumstances, be discarded with
household waste.
Take used remote control batteries and vehicle batteries to a
special collection point.