Peugeot RCZ 2015 Owner's Manual

179
RCZ_en_Chap08_info-pratiques_ed01-2015
dASHBOARd FUSES
The fusebox is placed in the lower section of the dashboard (left-hand \
side). It consists of two boxes.
Access to the fuses
F Refer to the paragraph "Access to the tools".
Fuse tables
Fuse N° RatingFunctions
F2 30 ALocking and deadlocking earth.
F3 5 AAirbags, active bonnet and pretensioners
control unit.
F4 10 AClutch pedal switch, electrochromatic
rear view mirror, automatic gearbox,
switching and protection unit.
F5 30 AOne-touch electric windows, folding door
mirrors supply.
F7 5 AFront and rear courtesy lamps, map
reading lamps, sun visor lighting, glove
box lighting.
F8 20 AAudio
equipment, audio/telephone,
multifunction

screen, tyre under-inflation
detection, clock.
F9 30 A12 V socket.
F10 15 ASteering mounted controls.
F

11 15 ALow current ignition switch.
F12 15 AInstrument panel, air conditioning,
driver's seat memory unit, rain /
sunshine sensor, airbags.
Box 1
8/
PRACTICAL INFORMATION

180
RCZ_en_Chap08_info-pratiques_ed01-2015
Fuse N° RatingFunctions
F13 5 AEngine fusebox, active bonnet.
F14 15 AMultifunction screen, seat belt and
passenger's front airbag warning lamps
display, instrument panel screen,
amplifier,
Bluetooth system, parking
sensors control unit, USB Box.
F15 30 ALocking and deadlocking.
F17 40 ARear screen and door mirrors demist/
defrost.
Fuse N° Rating Functions
G36 30 AHi-Fi

amplifier.
G37 30 APassenger's seat memory unit.
G38 30 ADriver's seat memory unit.
G39 5 ALighting memory unit.
G40 30 ADriver and passenger heated seats.
Box 2

181
RCZ_en_Chap08_info-pratiques_ed01-2015
ENGINE COMPARTMENT FUSES
The fusebox is placed in the engine compartment near the battery
(left-hand side).
Access to the fuses
F Unclip the cover.
F
Change the fuse (see corresponding paragraph).
F

When you have finished, close the cover carefully to assure the
sealing of the fusebox.
Fuse table
Fuse N° RatingFunctions
F2 15 AHorn.
F3 10 AFront wash-wipe.
F4 20 ADaytime running lamps.
F5 15 AAir
flow sensor, coolant pump, oil pump,
thermostat, blow-by heater (petrol),
by-pass and EGR electrovalves (Diesel),
diesel heater (Diesel).
F6 10 ASteering wheel angle sensor

, ABS/DSC
control unit, DSC sensor.
F7 10 APower steering control unit, automatic
gearbox, dual function brake switch.
F8 25 AStarter motor control.
F9 10 ADiagnostic socket, directional
headlamps,
particle emission filter pump
(Diesel).
F

11 40 AAir conditioning blower.
8/
PRACTICAL INFORMATION

182
RCZ_en_Chap08_info-pratiques_ed01-2015
Fuse N° RatingFunctions
F12 40 AWindscreen wipers slow / fast speed.
F15 10 ARight-hand main beam headlamp.
F16 10 ALeft-hand main beam headlamp.
F17 15 ALeft-hand dipped headlamp.
F18 15 ARight-hand dipped headlamp.

183
RCZ_en_Chap08_info-pratiques_ed01-2015
Table of fuses over the battery
Fuse N° RatingFunctions
F2 5 ADual function brake switch.
F3 5 ABattery charge unit.
F4 25 AABS/ESC electrovalves.
F6 15 AAutomatic gearbox. All work on the other types of fuses (midi-fuses and maxi-fuses)
must
be carried out only by a PEUGEOT dealer or a qualified
workshop.
8/
PRACTICAL INFORMATION

184
RCZ_en_Chap08_info-pratiques_ed01-2015
TOWING A VEHICLE
TOWING EYE
This is stored in the boot under the floor.
For access to it:
F

open the boot,
F

raise the floor using the strap,
F

secure it in the vertical position beyond the stops, located on the
sides of the boot,
F


remove the towing eye from the storage box.
GENERAL RECOMMEN d ATIONS
Observe the legislation in force in your country.
Ensure that the weight of the towing vehicle is higher than that of
the towed vehicle.
The driver must remain at the wheel of the towed vehicle and
must have a valid driving licence.
When towing a vehicle with all four wheels on the ground, always
use an approved towing arm; rope and straps are prohibited.
The towing vehicle must move off gently.
When towing a vehicle with the engine off, there is no longer any
power assistance for braking or steering.
In the following cases, you must always call on a professional
recovery service:
-

vehicle broken down on a motorway or fast road,
-


four-wheel drive vehicle,
-


when it is not possible to put the gearbox into neutral, unlock
the steering, or release the parking brake,
-


towing with only two wheels on the ground,
-


where there is no approved towing arm available...

185
RCZ_en_Chap08_info-pratiques_ed01-2015
TOWING YOUR VEHICLE
Towing from the front
F On the front bumper , unclip the cover by pressing on the left.
F
Screw the towing eye in fully
.
F

Install the towing arm.
F


Place the gear lever in neutral (position N

for an automatic
gearbox).
Failure to follow this advice could result in damage to certain
components (braking, transmission...) and the absence of
braking assistance the next time the engine is started.
F


Unlock the steering by turning the ignition key one notch and
release the parking brake.
F


Switch on the hazard warning lamps on both vehicles.
F


Move of
f gently and drive slowly and for a short distance only.
Towing from the rear
It is also possible to pull your vehicle from the rear, but only in
exceptional circumstances (vehicle in a parking space, off the road...).
F
On the rear bumper
, unclip the cover by pressing on the left.
F

Screw the towing eye in fully
.
F

Install the towing bar
.
F

Place the gear lever in neutral (position N

for an automatic
gearbox).
F

Switch on the hazard warning lamps on both vehicles.
F


Move of
f very gently to pull the vehicle out.
* Except version with symmetrical twin exhaust tailpipes.
TOWING ANOTHER VEHICLE *
F On the rear bumper, unclip the cover by pressing on the left.
F
Screw the towing eye in fully
.
F

Install the towing bar
.
F

Switch on the hazard warning lamps on both vehicles.
F


Move of
f gently and drive slowly and for a short distance only.
8/
PRACTICAL INFORMATION

186
RCZ_en_Chap08_info-pratiques_ed01-2015
TOWING A TRAILER
Towbar suitable for the attachment of a trailer with additional lighting \
and signalling.
We recommend use of the PEUGEOT genuine towbar with ball
which can be removed without tools and its harness that have
been tested and approved from the design stage of your vehicle,
and
that the fitting of the towbar is entrusted to a PEUGEOT
dealer

or a qualified workshop.
If
the trailer is fitted outside the PEUGEOT

dealer network, it must
be

fitted in accordance with the manufacturer's instructions.
dRIVING Ad VICE
Driving with a trailer subjects the towing vehicle to more significant stress and its driver must be particularly careful.
distribution of loads
F Distribute the load in the trailer so that the heaviest items are as
close as possible to the axle and the nose weight approaches the
maximum permitted without exceeding it.
Air density decreases with altitude, thus reducing engine performance.
Above 1
000 metres, the maximum towing load must be reduced by
10
% and so on for every 1 000 metres of altitude.
Refer to the "Technical data" section for details of the weights and
towing loads which apply to your vehicle version.
Side wind
F Take into account the increased sensitivity to side wind.
Your vehicle is primarily designed for transporting people and luggage,
but it may also be used for towing a trailer. Versions that have asymmetrical twin exhaust tailpipes cannot be
fitted

with

a

towbar.

187
RCZ_en_Chap08_info-pratiques_ed01-2015
Cooling
Towing a trailer on a slope increases the temperature of the coolant.
As the fan is electrically controlled, its cooling capacity is not depen\
dent
on the engine speed.
F
T
o lower the engine speed, reduce your speed.
The maximum towing load on a long slope depends on the gradient and
the ambient temperature.
In all cases, pay attention to the coolant temperature.
Braking
Towing a trailer increases the braking distance.
Tyres
F Check the tyre pressures of the towing vehicle and of the trailer ,
observing the recommended pressures.
Lighting
F Check the electrical signalling on the trailer .
F
If the warning l
amp and the STOP warning lamp come
on, stop the vehicle and switch off the engine as soon as
possible. The rear parking sensors will be deactivated automatically if a
genuine PEUGEOT towbar is used.
When not towing a trailer, remove the quickly-detachable tow ball
before driving, so as to avoid masking the central rear lamp.
8/
PRACTICAL INFORMATION

188
RCZ_en_Chap08_info-pratiques_ed01-2015
CLEANING AND MAINTENANCE
The general recommendations on cleaning and maintaining your vehicle
are given in the servicing and warranty booklet.
ALUMINIUM ARCHES
To clean these arches, do not use a dry cloth with an abrasive product.
Use a sponge and soapy water.
PEUGEOT TECHNO TEP
To clean this trim, do not use solvents or detergents with a dry cloth.
First remove dust, then use a soft cloth and soapy water. Dry with
another soft cloth.
HEAdLAMPS ANd LAMPS
The headlamps have polycarbonate lenses, finished with a protective lacquer.
Do not clean them with a dry or abrasive cloth, nor with detergent or
solvent products.
Use a sponge and soapy water.
CUSTOMISING STICKERS
These customising parts are self-adhesive stickers, treated to give good\

resistance to ageing and tearing.
They are intended for customising the body.
Available
also as accessories, we recommend that you have them fitted
by

a PEUGEOT

dealer or a qualified workshop.
The use of a high pressure jet wash for cleaning the headlamps,
lamps
and their surrounds may damage the lacquer and seals.
Observe the recommendations on pressure and distance for jet
washing.
First clean persistent stains with a sponge and warm soapy water.
When washing your vehicle, keep the end of a high-pressure
lance at least 30 centimetres from the stickers.