bluetooth Peugeot RCZ 2015 Owner's Manual

31
RCZ_en_Chap01_controle-de-marche_ed01-2015
MAIN MENU
F Press the "MENU" button to gain access to the main menu:
-
audio functions,
-


vehicle diagnostics,
-

personalisation-configuration,
-

telephone (Bluetooth system).
F


Press the "
5" or "6" buttons to select the menu required, then
confirm

by pressing the
"OK"
button.
"AUdIO FUNCTIONS" MENU
With the PEUGEOT Connect Sound (RD5) switched on, once this menu
has been selected you can activate or deactivate the functions linked
with use of the radio (RDS, REG, RadioText) or the CD (introscan,
shuffle, CD repeat).
For more information on the "Audio functions" application, refer to the \
"PEUGEOT


Connect Sound (RD5)" part of the "Audio equipment and
telematics" section.
"dIAGNOSIS VEHICLE" MENU
Once this menu has been selected, you can consult information
concerning the status of the vehicle.
Alert log
This summarises the active warning messages, displaying them in
succession on the multifunction screen.
F

On the "
d iagnosis vehicle" menu, select the following application:
F

Press the
"MENU" button to gain access to the main menu.
F

Press the arrows, then the
"OK" button to select the " d iagnosis
vehicle" menu.
1/
MONITORING

33
RCZ_en_Chap01_controle-de-marche_ed01-2015
With the PEUGEOT Connect Sound (RD5) switched on, once this menu
has been selected you can configure your Bluetooth hands-free system
(pairing), consult the various telephone directories (calls log, serv\
ices...)
and manage your communications (pick up, hang up, call waiting,
secret mode...).
For more information on the "T

elephone" application, refer to the
"PEUGEOT


Connect Sound (RD5)" part of the "Audio equipment and
telematics" section.
"TELEPHONE" MENUdisplay configuration
Once this menu has been selected, you have access to the following
settings:
-
brightness-video setting,
-


date and time setting,
-


choice of units.
Choice of language
Once this menu has been selected, you can change the language
used by the display (Deutsch, English, Espanol, Français, Italiano, \
Nederlands, Portugues, Portugues-Brasil, Türkçe**). As
a safety measure, configuration of the multifunction screen by
the driver must only be done when stationary

.
Setting the date and time
F
Press the "
7" or "8" button to display the "Display configuration"
menu, then the

"OK" button.
F
Press the "
5" or "6" button to select the "Adjust date and time"
line, then the "OK" button.
F
Press the "
7" or "8" button to select the setting to modify. Confirm
by pressing the
"OK"
button then modify the setting and confirm
again

to save the modification.
F Adjust the settings one by one, confirming with the
"OK"
button.
F
Press the "
5" or "6" button, then the "OK" button to select the
"OK" box and confirm, or the "Back"
button to cancel.
** According to country of sale.
1/
MONITORING

180
RCZ_en_Chap08_info-pratiques_ed01-2015
Fuse N° RatingFunctions
F13 5 AEngine fusebox, active bonnet.
F14 15 AMultifunction screen, seat belt and
passenger's front airbag warning lamps
display, instrument panel screen,
amplifier,
Bluetooth system, parking
sensors control unit, USB Box.
F15 30 ALocking and deadlocking.
F17 40 ARear screen and door mirrors demist/
defrost.
Fuse N° Rating Functions
G36 30 AHi-Fi

amplifier.
G37 30 APassenger's seat memory unit.
G38 30 ADriver's seat memory unit.
G39 5 ALighting memory unit.
G40 30 ADriver and passenger heated seats.
Box 2

203
RCZ_en_Chap10b_RT6-2-8_ed01-2015
The system is protected in such a way that it will only
operate in your vehicle.
PEUGEOT Connect Navigation (RT6)
01 First steps - Control panel
For safety reasons, the driver must only carry out
operations
which require prolonged attention while the
vehicle is stationary

.
When the engine is switched off and to prevent
discharging of the battery, the system switches off
following the activation of the energy economy mode.
CONTENTS
02

Steering mounted
controls
03

General operation
04


Navigation
- Guidance
05

T
raffic information
06

Using
the telephone
07
Radio
08

Music media players
09


Audio
settings
10
Configuration
11

Screen menu
map p.
p.
p.
p.
p.
p.
p.
p.
p.
p.
p. 204
206
207
209
222
225
235
240
246
247
248
GPS navigation system
Multimedia audio system
Bluetooth
® telephone
Frequently asked questions p. 252

06
225
RCZ_en_Chap10b_RT6-2-8_ed01-2015
Access to the "TELEPHONE" menu
"Telephone"" d ial"
"
d irectory of contacts"
"Contacts management "
"Phone functions "
"Bluetooth functions "
"Hang up "
Go from the list to the menu (left/right). or
List of recent calls sent and
received with the telephone
connected to the system.
Press this button.
To

make

a

call,

select

a

number

in

the

list

and

confirm

" OK"
to start the call.
Connecting a different telephone deletes the list of
recent calls. No telephone connected.
Telephone connected.
Incoming call.
Outgoing call.
Synchronisation of
contacts in progress.
Telephone call in
progress.
In the top bar of the permanent
display
USING THE TELEPHONE

06
226
RCZ_en_Chap10b_RT6-2-8_ed01-2015
USING THE TELEPHONE
Pairing a Bluetooth® telephone
First connectionFor reasons of safety and because they require prolonged attention on the part of the driver , the operations for pairing the Bluetooth
mobile telephone to the hands-free system of the audio unit must be
carried out with the vehicle stationary.
In the Bluetooth menu of your telephone, select the
name "PEUGEOT" from the list of devices detected. Press this button.
Select "Bluetooth functions" and
confirm.
Select "Peripherals search " and
confirm.
The list of peripheral devices detected
is displayed. Wait until the "Connect"
button is available.
You can check the compatibility of your telephone at
www.peugeot.co.uk (services).
Activate the telephone's Bluetooth function
and ensure that it is "visible to all" (telephone
configuration).
Quick procedure from the telephone
Enter

a

minimum

4

figure

code

in

the

telephone

and

confirm. Enter the same code in the system,
select "

OK"

and

confirm. Procedure from the system

06
227
RCZ_en_Chap10b_RT6-2-8_ed01-2015
USING THE TELEPHONE
Select "Connect" and confirm.
The system of fers to connect the
telephone:
-

in "
Hands-free mode" (telephone
only),
-

in "
Audio" mode (streaming: playing
music
files on the telephone),
-

or "
All" (for selection of both
modes).
Select "OK"
and confirm. Then accept automatic connection on the telephone to allow the
telephone to reconnect automatically every time the vehicle is
started.
The ability of the system to connect in only one mode depends on
the telephone. The two modes may both connect by default. The "Hands-free mode" should be used in preference if
"Streaming" is not desired.
The services available depend on the network, the SIM card and the compa\
tibility of the Bluetooth telephone used. Check the telephone
manual and with your network provider for details of the services availa\
ble to you.
Depending on the type of telephone, the system will ask you to
accept or not the transfer of your contacts.
On return to the vehicle, the last telephone connected
automatically reconnects, within around 30 seconds after
switching on the ignition (Bluetooth activated and visible).
To modify the automatic connection mode, remove the pairing
and pair the telephone again with the desired mode.
Enter
a minimum 4 figure code in the telephone
and

confirm.
Enter the same code in the system,
select "OK" and confirm.
Select the name of the desired
peripheral from the list of devices
detected
then confirm.

06
229
RCZ_en_Chap10b_RT6-2-8_ed01-2015
Editing, importing or deleting a contact
Press PHONE then select "directory of
contacts " and confirm.
Select "Search", then turn the knob to
choose in numerical or alphabetical order
a group of contacts from the entries made
previously,
then confirm.
Go to the list of contacts, select the
desired
contact then confirm.
Select "Open" to view a contact on the
telephone or modify a contact saved in
the system.
Select "Import" to copy a contact from
the telephone to the system.
Select "
d elete" to delete a contact
recorded in the system.
USING THE TELEPHONE
Select OK or press the back button to exit
this menu.
Once the contact has been imported, the Bluetooth symbol
disappears, replaced by the telephone symbol which shows that the
contact has been saved in the system. It is not possible to modify or delete contacts in the telephone or the \
SIM card via the Bluetooth connection.
In the "
d
irectory of contacts" menu, the import and deletion of
contacts is done one by one.

06
234
RCZ_en_Chap10b_RT6-2-8_ed01-2015
Press PHONE twice.
Select "List of the paired peripherals"
and
confirm.
It is possible to:
-
"Connect" or " d isconnect" the
selected telephone,
-

delete the pairing of the selected
telephone.
It is also possible to select all pairings.
Managing paired telephones Changing the ringtone
Press PHONE twice.
Select "Phone functions"
and confirm.
Select "Ring options "
and confirm.
You can adjust the volume and the type
of ringtone.
Select "Bluetooth functions
".
Select "OK"
and confirm to save
the

changes.
USING THE TELEPHONE

08
244
RCZ_en_Chap10b_RT6-2-8_ed01-2015
Audio streaming
Streaming allows audio files on your telephone to be played via the vehicle's speakers.
Connect the telephone: refer to the "USING THE TELEPHONE"
section.
Select "
Audio" or "All" profile.
If play does not start automatically, it may be necessary to start the
audio playback from the telephone.
Control is from the peripheral device or by using the audio system
buttons.
Once connected in streaming mode, the telephone is considered to be
a media source.
It is recommended that you activate "Repeat" on the Bluetooth
peripheral.
MUSIC MEdIA PLAYERS
Connecting APPLE® players
Connect the Apple® player to the USB port using a suitable cable
(not

supplied).
Play starts automatically.
Control is via the audio system.
The

classifications

available are those of the portable device
connected (artists / albums / genres / playlists / audiobooks /
podcasts).
The


default

classification used is by artist.
T
o modify the classification
used,


return

to

the

first level of the menu then select the desired
classification


(playlists for example) and confirm to go down through
the menu to the desired track.
The


"Shuffle

tracks" mode on an iPod
® corresponds to the "Random"
mode on the audio system.
The

"Shuffle

albums"

mode

on

an

iPod
® corresponds to the "Random
all" on the audio system.
"Shuffle

tracks"

is

restored

by

default

on each connection.
The version of software in the audio system may not be compatible
with the generation of your Apple
® player.