display Peugeot Traveller 2016 Owner's Manual - RHD (UK, Australia)

.
.
Driving recommendations 192
Starting-switching off the engine, manual key, remote control

1
95
Starting-switching off the engine
"Keyless
e
n
try and Starting"
1
98
Parking brake

2
01
Hill start assist

2
02
5-speed manual gearbox
2

03
6-speed manual gearbox
2

03
Gear ef ficiency indicator

2
04
Automatic gearbox
20

5
ele

ctronic gearbox
2
10
Stop & Start

2
14
Head-up display

2
18
Memorising speeds
2

20
Speed limit recognition
2

21
Speed limiter
2

25
Cruise control

2
28
Dynamic cruise control

2
32
Collision Risk Alert and Active Safety Brake
23

9
Lane departure warning system

2
45
Fatigue detection system

2
47
Blind spot monitoring system

2
49
Parking sensors
2

52
Reversing camera, interior mirror

2
54
180° rear vision

2
55
Under-inflation detection
2

58Fuel tank
2 61
Diesel misfuel prevention 26
2
Snow chains

2
64
to

wing a trailer
2
65
en

ergy economy mode
26
6
Accessories
2

67
Roof bars / Roof rack

2
68
Changing a wiper blade
2

69
B o nnet


271
Diesel engine
2

72
Checking levels

2
73
Checks


276
AdBlue
® and SCR system
(BlueHDi Diesel) 2 78
Warning triangle (stowing)
2

82
to

ol box
2
82
te

mporary puncture repair kit
2
85
Changing a wheel
2

91
Changing a bulb
2

98
Changing a fuse
3

11
12 V battery

3
16
to

w i n g

3 2 0
Running out of fuel (Diesel)

3
22Dimensions


323
en

gines

324
Weights

324
Identification markings
3
27
Driving
Practical information
In the event of a breakdownte chnical data
emergency or assistance 328
Pe ugeot Connect Nav 3 31
P
e

ugeot Connect Radio
4
19
Bluetooth
® audio system 4 73
Audio equipment and telematics
Alphabetical index
Contents

7
Locking - unlocking from inside 64el
ectric sliding
d o o r (s)
6

8 -71
el

ectric child lock
1
90
Hazard warning lamps
1

58
Reinitialising the under-inflation detection
2

58-260
Deactivating Stop & Start

2
16
Deactivating the DSC/ASR system
161Adjusting the steering wheel

87
H

or n

159
Head-up display
21

8 -219
Instruments and controls (cont.)
Wiper c ontrol 15
4 -15 6tr
ip computer 3 8 - 40
Memorising speeds
2

20
Speed limiter
2

25-227
Cruise control

2

28 -231
Dynamic cruise control

2

32-238 Instrument panel

1
3 -14
Warning lamps
1
5-28
Coolant temperature
2
9
Service indicator
2
9-31
oi

l level indicator
3
2
AdBlue
® range indicators 33 -35
Distance recorder 3 6
ge

ar shift indicator
2
04
Lighting dimmer

3
7
tr

ip computer
3
8 - 40
Setting the time and date

4
4
Fatigue detection system

2
47-248
el

ectric windows
8
6
Adjusting the electric m i r r o r s


141
gr

ip control
16
1, 162-163
Programmable heating - ventilation
1

37-139
Alarm


83-85
Adjusting the headlamp beam height
1

53
Lane Departure Warning System

2
45 -246
Blind Spot Monitoring System
2

49-251
Automatic headlamp dipping


151-152
Setting the time and date (touch screen) 44Setting the time and date (audio system) 44
Rear vision
2
55 -257
Memorising speeds
2

20
Speed limit recognition

2

21-224, 227, 230, 234
Collision Risk Alert

2

39 -242
Active Safety Brake

2

42-244
Deactivating Stop & Start

2
16
Lighting control
1

44-147
Direction indicators
1

46
.
over view

11
eco-driving is a range of everyday practices
that allow the motorist to optimise their fuel
consumption and Co
2 emissions.
eco-driving
Optimise the use of your
gearbox
With a manual gearbox, move off gently and
change up without waiting. During acceleration
change up early.
With an automatic or electronic gearbox,
give preference to automatic mode and avoid
pressing the accelerator pedal heavily or
suddenly.
th

e gear shift indicator invites you to engage
the most suitable gear: as soon as the
indication is displayed in the instrument panel,
follow it straight away.
For vehicles fitted with an electronic or
automatic gearbox, this indicator appears only
in manual mode.
Drive smoothly
Maintain a safe distance between vehicles, use
engine braking rather than the brake pedal,
and press the accelerator progressively.
t
h
ese
practices contribute towards a reduction in fuel
consumption and C
o
2 emissions and also help
to reduce the background traffic noise.
If your vehicle has cruise control, make use of
the system at speeds above 25 mph (40 km/h)
when the traffic is flowing well.
Control the use of your
electrical equipment
Switch off the demisting and defrosting controls,
if not automatic.
Switch off the heated seat as soon as possible.
Switch off the headlamps and front foglamps
when the level of light does not require their
use.
Avoid running the engine before moving off,
particularly in winter; your vehicle will warm up
much faster while driving.
As a passenger, if you avoid connecting
your multimedia devices (film, music, video
game...), you will contribute towards limiting the
consumption of electrical energy, and so of fuel.
Disconnect your portable devices before
leaving the vehicle.
Before moving off, if the passenger compartment
is too warm, ventilate it by opening the windows
and air vents before using the air conditioning.
Above 30 mph (50 km/h), close the windows and
leave the air vents open.
Remember to make use of equipment that can
help keep the temperature in the passenger
compartment down (sunroof and window blinds...).
Switch off the air conditioning, unless it has
automatic regulation, as soon as the desired
temperature is attained.
.
eco-driving

13
1. Analogue speedometer (mph or km/h).
2. Fuel gauge.
3.


e
ng
ine coolant temperature gauge.
4.
C

ruise control or speed limiter settings.
5.
D

igital speedometer (mph or km/h). A. S
ervice indicator reset. R
ecall of instantaneous information on:
-


servicing,
-
r

emaining driving range with the
emissions fluid (AdBlue
®).
B. M
ain lighting dimmer.
C.


t
r

ip recorder reset.
6.


g
e

ar shift indicator.


g
e

ar with an automatic or electronic
gearbox.
7.
S

ervice indicator, then total distance
recorder (miles or km), trip recorder (miles
or km), display of messages, ...
8.
R

ev counter (x 1 000 rpm or tr/min).
Dials and screens Control buttons
LCD text instrument panel
1
Instruments

14
Matrix instrument panel
1. Analogue speedometer (mph or km/h).
2. Fuel gauge.
3.


e
ng
ine coolant temperature gauge.
4.
C

ruise control or speed limiter settings.
5.


g
e
ar shift indicator.


g
e
ar with an automatic or electronic
gearbox. A. S
ervice indicator reset. A
lert log display.
R

ecall of information on:
-


servicing,
-
r

emaining driving range with the
emissions fluid (AdBlue
®).
B. M
ain lighting dimmer.
C.


t
r

ip recorder reset.
6.
D

isplay area: alert or state of function
messages, trip computer, digital
speedometer (mph or km/h), ...
7.
S

ervice indicator, then total distance
recorder (miles or km).
th
ese functions are displayed in turn when
the ignition is switched on.
8.


t
r

ip recorder (miles or km).
9.
R

ev counter (x 1 000 rpm or tr/min).
Dials and screens Control buttons
Instruments

15
Indicator and warning lamps
Visual indicators informing the driver that
a system is in operation or is switched off
(indicator lamp), or has a fault (warning lamp).
When the ignition is switched on
Certain warning lamps come on for a few
seconds when the vehicle's ignition is
switched

on.
When the engine is started, these same
warning lamps should go off.
If they remain on, before moving off, refer to the
information on the warning lamp concerned.
Associated warnings
Certain warning lamps may come on in one of
two modes: fixed (continuous) or flashing.
on

ly by relating the type of illumination to the
operation of the vehicle can it be determined
whether the situation is normal or a fault has
occurred. In the event of a fault, the illumination
of the warning lamp may be accompanied by
an audible signal and/or a message.
Warning lamps
When the engine is running or the vehicle is
being driven, illumination of one of the following
warning lamps indicates a fault which requires
action on the part of the driver.
Any fault resulting in the illumination of a
warning lamp must be investigated further
using the associated message.
If you encounter any problems, contact a
P
e

ugeot dealer or a qualified workshop.
Operation indicator lamps
If one of the following indicator lamps comes on
in the instrument panel and/or instrument panel
screen, this confirms that the corresponding
system has come into operation.
Deactivation indicator lamps
If one of the following indicator lamps comes
on, this confirms that the corresponding system
has been switched off intentionally.
th
is is may be accompanied by an audible
signal and the display of a message.
1
Instruments

22
Warning / indicator lampStateCause Action / Observations
Passenger's
front airbag fixed in the seat belt
and front passenger's
airbag warning lamps
display.
th

e control switch, located at the
passenger's end of the dashboard, is
set to the "OFF" position.
the

passenger's front airbag is
deactivated.
You can install a rear ward facing
child seat, unless there is a fault with
the airbags (airbag warning lamp on).
tu

rn the control switch to the "ON" position to activate
the passenger's front airbag; in this case, you must
not install a child seat in the rear ward facing position
on this seat.
Airbags
on temporarily.
th

is warning lamp comes on for a
few seconds when you turn on the
ignition, then goes off.
th

is warning lamp should go off when the engine is
started.
If it does not go off, contact a P
e

ugeot dealer or a
qualified workshop.
fixed.
on

e of the airbag or seat belt
pretensioner systems has a fault. Have them checked by a P
e

ugeot dealer or a
qualified workshop.
Passenger's
airbag system fixed.
th

e control switch, located at the
passenger's end of the dashboard, is
at the " ON" position.
the

passenger's front airbag is
activated.
In this case, do not install a rear ward
facing child seat on the front
passenger seat.
tu

rn the control switch to the "OFF" position to
deactivate the passenger's front airbag.
You can install a rear ward facing child seat, unless
there is a fault with the airbags (airbag warning
lamp


on).
Instruments

26
Warning / indicator lampStateCause Action / Observations
Rear foglamps fixed.
th

e rear foglamps are on.
tu
rn the ring on the stalk rear ward to switch off the
rear foglamps.
Service
on temporarily. A minor fault has occurred for which
there is no specific warning lamp. Identify the fault by means of the associated message,
for example:
-

l
ow engine oil level,
-

l
ow screenwash/headlamp wash fluid level,
-

d
ischarged remote control battery,
-

l
ow tyre pressures,
-

s
aturation of the particle filter (FAP) on Diesel
vehicles.
-


...
For more information on Checks and in particular the
particle filter, refer to the corresponding section.
For any other faults, contact a P
e

ugeot dealer or a
qualified workshop.
fixed. A major fault has occurred for which
there is no specific warning lamp. Identify the fault by reading the message and contact
a P
e

ugeot dealer or a qualified workshop.
+ fixed, associated with
flashing and then fixed
display of the service
spanner.
the

servicing interval has been
exceeded.
on

ly on BlueHDi Diesel versions.
Your vehicle must be serviced as soon as possible.
Instruments

30
Between 600 miles (1 000 km)
and 1 800 miles (3 000 km) remain
before the next service is due
For 5 seconds after the ignition is switched on, the
spanner symbolising the service operations comes
on. t
h
e distance recorder display line indicates the
distance remaining before the next service is due.
Example: 1 700 miles (2 800 km) remain before
the next service is due.
For 5 seconds after the ignition is switched on, the
screen indicates:
5 seconds after the ignition is switched on,
the spanner goes off ; the distance recorder
resumes its normal operation.
t
h
e screen then
indicates the total distance.
Service overdue
5 seconds after the ignition is switched on,
the distance recorder resumes its normal
operation. The spanner remains on. For 5 seconds after the ignition is switched on,
the spanner flashes to indicate that the service
must be carried out as soon as possible.
Example: the service is overdue by 180 miles
(3 0 0 k m).
For 5 seconds after the ignition is switched on,
the screen indicates:
Less than 600 miles (1 000 km)
remain before the next service is due
5 seconds after the ignition is switched on,
the distance recorder resumes its normal
operation. The spanner remains on to
indicate that a service must be carried out
soon.
For BlueHDi Diesel versions, this alert may
also be accompanied by the fixed illumination
of the service warning lamp when the ignition
is on.
More than 1 800 miles (3 000 km)
remain before the next service is due
When the ignition is switched on, no service
information appears in the screen. Example:
560 miles (900 km) remain before
the next service is due.
For 5 seconds after the ignition is switched on,
the screen indicates:
Instruments

31
the distance remaining may be
weighted by the time factor, depending
on the driving conditions.
th
erefore, the spanner may also come
on if you have exceeded the period
since the last service, indicated in the
manufacturer's service schedule.
For BlueHDi Diesel versions, the
spanner may also be brought on earlier
than expected, depending on the
degree of deterioration of the engine oil
(depending on the country of sale).
th

e rate of deterioration of the engine
oil depends on the driving conditions in
which the vehicle is used.Resetting the service indicatorIf you have to disconnect the battery
following this operation, lock the vehicle
and wait at least five minutes for the
reset to be registered.
You can access the service information at any
time.
After each service, the service indicator must
be reset to zero.
If you have carried out the service on your
vehicle yourself, switch off the ignition:
Retrieving the service
information
F Press and hold this button,
F

S

witch on the ignition; the distance
recorder display begins a countdown,
F

W

hen the display indicates "=0" , release
the button; the spanner disappears. F

P
ress this button.th
e service information is displayed for a
few


seconds, then disappears.
1
Instruments