audio PONTIAC FIREBIRD 1994 User Guide

Reverse
Press “REV” to rapidly rewind the tape.
Press “PROG’ or “REV” again to stop it.
The radio will play during this operation.
To Play the Next Selection
Press “NEXT” or “SEEK A’’ to hear the
next selection (instead of waiting until the
current selection is finished.)
For “NEXT” to work properly, your tape
must have at least three seconds of silence
between each selection.
The radio will not play during this
operation.
To Replay the Current Selection
Press “PREV” or “SEEK V” to play a
selection again.
For “PREV” to work properly, your tape
must have at least three seconds of silence
between each selection.
The radio will not play during this
operation.
Program
Press “PROG’ to switch from one side of
the tape to the other or to stop the tape
from searching.
Noise Reduction
Press 00 to reduce tape noise. This
symbol will appear in the display.
To Stop the Tape Player
Turn the power off or turn the ignition
key off. The cassette stays in
the
player and will resume playing at the
point where it stopped.
cassette and switch to the radio. Press
“TAPE-PLAY’’ to restart
the cassette
at
the point where it stopped.
e Press “EJECT” to remove the cassette
or stop the cassette and switch to
radio. “EJECT” will work with the
ignition or radio off. Press “EJECT”
to load a cassette when the radio is
off.
0 Press “AMEM” to stop playing the
NOTE: This radio has a “broken tape”
feature that will eject broken or misfed
tapes. Because of this feature, CD:
changers that plug into
the tape deck
will not work in this system.
Theft-Deterrent System
Your audio system is equipped with the
“THEFTLOCK’ theft-deterrent system.
See “Theft-Deterrent System” at the end
of this section.
111 . . .
ProCarManuals.com

Comfort Controls and Audio Systems
AM/FM Stereo with Cassette
Tape Player and Graphic
Equalizer
To Play the Radio
Push “POWER” to turn the system on or
off.
Volume
Turn the “VOLUME’ knob to adjust the
sound.
AM-FM
Press “AMEM’ to get AM, FM1 or FM2.
The lighted display shows your selection.
Tune
Press “TUNE’ to release the knob. Turn
the knob to choose radio stations. Push
“TUNE” back in to store it when not
tuning.
Recall
Press “RECALL” to recall the station
being played
of- the clock display. You can
also press “RECALL,” to display the time
when the ignition is
off.
Seek
Press “SEEK A ” or “SEEK ” to go
to the next lower or higher station and
stay there.
Pushbuttons
The six pushbuttons let you return to
your favorite stations.
To set the
pushbuttons for up to
18 stations
(6 AM, 6 FMl and 6 FM2).
1. Press “AMEM’ to choose AM,
2. Tune in the station.
3. Press and hold one of the six
FM1
or FM2.
pushbuttons until the display
shows
“SET.” Whenever you press that
button, the preset station will return.
. . .112
ProCarManuals.com

Steering Wheel Controls
Your vehicle may be equipped with
steering wheel controls for this audio
system. With steering wheel controls, you
can use the buttons
on your steering
wheel to:
0 Turn the audio system on or off.
Adjust the volume.
Choose AM, FM1 or FM2.
Use the seek and recall functions.
Choose one of the preset stations on
your pushbuttons.
Setting the Tone
Use the levers to set the bass, midrange
and treble until you get the sound you
want. The
“40,” “100,” “250” and
“625” levers adjust the bass.
“1.6K’ is
midrange, and “4K’ and
“l2K’ control
the treble. We suggest setting the “1.6K’
lever in the middle position and then
moving the other levers up or down until
you get the amount of bass and treble you
like.
Adjusting the Speakers
Balance:
Press “BAL” to release the
knob. Turn the knob to move the sound
between the right and left speakers. Push
“BAL” back in to store it when not
adjusting.
Fade: Press “FADE” to release the knob.
Turn the knob to move the sound between
the front and rear speakers. Push “FADE”
back in to store it
when not adjusting.
To Play a Cassette Tape
Your tape player is built to work best with
tapes that are
30 to 45 minutes long on
each side. Tapes longer than that are
so
thin they may not work well in this player.
A cassette symbol will appear in the
upper left corner of the display whenever
a tape is inserted.
The longer side with the tape visible goes
in first. If you hear nothing or hear just a
garbled sound, it may not be in squarely.
Press “EJECT.” to remove the tape and
start over.
Once the tape is playing, use
“VOLUME,” “BAL” and “FADE” just as
you do for the radio. The arrows show
which side
of the tape is playing.
Forward
Press “FWD” to rapidly advance to
another part of the tape. Press “PROG’ or
“FWD’ again to stop it. The radio will
play during this operation.
Reverse
Press “REV” to rapidly rewind the tape.
Press “PROG’ or
“REV” again to stop it.
The radio will play during this operation.
To Play the Next Selection
Press “NEXT” or “SEEK A” to hear the
next selection (instead
of waiting until the
current selection is finished.)
For
“NEXT” to work properly, your tape
must have at least three seconds
of silence
between each selection.
The radio will not play during this
operation.
To Replay the Current Selection
Press “PREV” or “SEEK v” to play a
selection again.
113 ...
ProCarManuals.com

Comfort Controls and Audio Systems
For “PREV” to work properly, your tape
must have at least three seconds of silence
between each selection.
The radio will not play during this
operation.
Program
Press “PROG” to switch from one side of
the tape to the other or to stop the tape
from searching.
Noise Reduction
Press 00 to reduce tape noise. This
symbol will appear in the display.
To Stop the Tape Player
0 Turn the power off or turn the ignition
key
off. The cassette stays in the
player and will resume playing at the
point where it stopped.
Press “AM/FM’ to stop playing the
cassette and switch to the radio. Press
“TAPE-PLAY” to restart the cassette
at
the point where it stopped.
Press “EJECT” to remove the cassette
or stop the cassette and switch to
radio. “EJECT” will work with the
ignition or radio
off. Press “EJECT”
to load a cassette when the radio
is
Off.
NOTE: This radio has a “broken tape”
feature that will eject broken or misfed
tapes. Because of this feature, CD
changers that plug into
the tape deck
will not work
in this system.
Theft-Deterrent System
Your audio system is equipped with the
“THEFTLOCK” theft-deterrent system.
See “Theft-Deterrent System” at the end
of this section.
. . .I14
ProCarManuals.com

Comfort Controls and Audio Systems
Steering Wheel Controls
Your vehicle may be equipped with
steering wheel controls for this audio
system. With steering wheel controls, you
can use the buttons on your steering
wheel to:
Turn the audio system on or off.
Adjust the volume.
0 Choose AM, FM1 or FM2.
Use the seek and recall functions.
Choose one of the preset stations on
your pushbuttons.
Setting the Tone
Bass:
Slide the “BASS” lever to the right
to hear more bass.
Treble: Slide the “TREBLE” lever to the
right to hear more treble.
If a station is weak and noisy, slide
“TREBLE’ to
the left to reduce the noise.
Adjusting the Speakers
Balance:
Press “BAL” to release the
knob.
Turn the knob to move the sound
between the right and left speakers. Push
“BAL” back
in to store it when not
adjusting.
Fade: Press “FADE” to release the knob.
Turn
the knob to move the sound between
the front and rear speakers. Push “FADE’
back in to store it when not adjusting.
To Play a Compact Disc
Before you begin, please note: don’t use
the mini-discs that are called “singles.”
They won’t eject. Use full-size compact
discs.
With
the audio system on, insert a disc
into the slot with the label side up. “CD’
will appear on the display and track 1 will
begin to play.
If the disc comes back out and “ERR’
appears on the display, it could be that:
* The disc is upside down.
It is dirty, scratched, or wet.
0 There’s too much moisture in the air.
You are driving on a very rough road.
The temperature is too hot or too cold.
Recall
Press “RECALL” to see what track is
playing. Press it again within five seconds
to see how long it has been playing.
The track number also appears when the
disc is inserted.
To Play the Next Selection
Press “NEXT” or “SEEK A” to hear the
next track now (instead of waiting until
the present track is finished).
If you press and hold this button or press
it more than once, the disc
will advance
further.
To Replay the Current Selection
Press “PREV” or “SEEK v” to hear a
track again.
If you press and hold this button, or press
it more than once,
the disc will return to
previous tracks.
. . .I16
ProCarManuals.com

Reverse
Press and hold “REV” to rapidly return to
a favorite passage. Release
it to play the
passage. The radio will play during this
operation.
Forward
Press and hold “FWD’ to quickly
advance within a track. Release
it to
resume playing. The radio will play
during this operation.
Random
Press “RDM” to hear a random selection
of tracks.
0
0
0
To Stop the Disc Player
Turn the power off or turn the ignition
key off. The disc stays
in the player
and
will resume playing at the point
where it stopped.
Press
‘‘AMFM’’ to stop playing the
disc and switch to radio. Press
“CDPLAY” to restart
the disc at the
point where it stopped.
Press “EJECT” to eject the disc or
stop the disc and switch to radio.
“EJECT” will work with the ignition
or radio off. Press “EJECT” to load a
disc when the audio system is
off.
Theft-Deterrent System
Your audio system is equipped with the
“THEFTLOCK’ theft-deterrent system.
See “Theft-Deterrent System” at the end
of this
section.
117.. .
ProCarManuals.com

Comfort Controls and Audio Systems
VOLUME
POWER PUSH 0 ;d THEFTLOCK
i
AMIFM Stereo with Compact
Disc Player and Graphic
Equalizer
To Play the Radio
Push “POWER’ to turn the system on or
Off.
Volume
Turn the “VOLUME’ knob to adjust the
sound.
L -
AM-FM
Press “AMEM’ to get AM, FMl or FM2.
The lighted display shows your selection.
Tune
Press “TUNE’ to release the knob. Turn
the knob to choose radio stations. Push
“TUNE” back in to store it when not
tuning.
Recall
Press “RECALL” to recall the station
being played or the clock display.
You can
also press “RECALL” to display the time
when the ignition is off.
Seek
Press “SEEK A ” or “SEEK ” to go to
the next lower or higher station and stay
there.
Pushbuttons
The six pushbuttons let you return to your
favorite stations. To set the pushbuttons
for up to
18 stations (6 AM, 6 FMl and
6 FM2):
1. Press “AM/FM” to choose AM, FM 1
2. Tune in the station.
or
FM2.
3. Press and hold one of the six
pushbuttons until the display shows
“SET.” Whenever you press that
button, the preset station will return.
. . .I18
ProCarManuals.com

I Steering Wheel Controls
Your vehicle has steering wheel controls
for this audio system. With steering wheel controls, you can use the buttons on your
steering wheel to:
0 Turn the audio system on or off.
0 Adjust the volume.
0 Choose AM, FM1 or FM2.
0 Use the seek and recall functions.
0 Choose one of the preset stations on
your pushbuttons.
Setting the Tone
Use the levers to set the bass, midrange
and treble
until you get the sound you
want. The “40,” “lOO,” “250” and “625”
levers adjust the bass. “1.6K” is
midrange, and
“4K” and “12K” control
the treble. We suggest setting the “1.6K”
lever in the middle position and then
moving the other levers up or down until
you get the amount of bass and treble you
like.
Adjusting the Speakers
Balance:
Press “BAL” to release the
knob. Turn the knob to move the sound
between the right and
left speakers. Push
‘‘BAL,” back in to store
it when not
adjusting.
Fade: Press “FADE” to release the knob.
Turn the knob to move the sound betweer
the front and rear speakers. Push “FADE”
back
in to store it when not adjusting.
To Play a Compact Disc
Before you begin, please note: don’t use
the mini-discs that are called “singles.”
They won’t eject. Use full-size compact
discs.
With the audio system on, insert a disc
into the slot with the label side up.
“CD”
will appear on the display and track 1 wil
begin to play.
If the disc comes back out and “ERR”
appears on the display,
it could be that:
0 The disc is upside down.
0 It is dirty, scratched, or wet.
0 There’s too much moisture in the air.
0 You are driving on a very rough road.
The temperature is too hot or too cold
Recall
Press “RECALL” to see what track is
playing. Press
it again within five seconds
to see how long it has been playing.
The track number also appears when the
disc is inserted.
To Play the Next Selection
Press “NEXT” or “SEEK A” to hear the
next track now (instead of waiting until
the present track is finished).
If you press and hold this button or press
it more than once, the disc will advance
further.
To Replay the Current Selection
Press “PREV” or “SEEK v” to hedr a
track again.
If
you press and hold this button, or press
it more than once, the disc will return to
previous tracks.
Reverse
Press and hold “REV” to rapidly return to
a favorite passage. Release
it to play the
passage. The radio
will play during this
operation.
119..
ProCarManuals.com

Comfort Controls and Audid Systems
Forward
Press and hold “FWD’ to quickly
advance within a track. Release it to
resume playing. The radio will play
during this operation.
Random
Press “RDM’ to hear a random selection
of tracks.
To Stop the Disc Player
Turn the power off or turn the ignition
key
off. The disc stays in the player
and will resume,playing at the point
where it stopped.
Press
“AM/FM’ to stop playing the
disc and switch to radio. Press
“CDPLAY” to restart the disc at the
point wherk it stopped.
Press “EJECT” to eject the disc or
stop the disc
arid switch to radio.
“EJECT” wili work with the ignition
or radio
off. Press “EJECT” to load a
disc when the audio system is
off.
rheft-Deterrent System
Your auklio system is equipped with the
‘THEFTLOCK” theft-deterrent system.
See “Theft-Deterrent System” at the end
3f this section.
rheft-Deterrent Feature
rHEFTZOCK is a security feature for the
Zassette tape and compact disc player. It
:an be used or ignored. If ignored, the
System functions normally:
If it is used,
your system won’t be usable if it’s ever
stolen. When the system is active, the
indicator light will flash while the ignition
is off.
Setting Your Security Code
The instructions below tell you how to
enter a security code into the system. If
your vehicle loses battery power for any
reason, you must enter the security code
again before the system will turn on.
1. Write down any number from 000 to
1999 and keep it in a safe place.
2. Turn the ignition switch to tHk “ACC”
or “Run” position.
3. T~irn the audio system off.
4. Press and hold pushbuttons “1” and
“4” together until “---” shows on the
display.
You are now ready to enter your security
:ode. Don’t wait more than
15 seconds
between steps.
5. Press “MIN” and “000” will appear
on the display.
6. Press “MIN’ again and hold until the
last two digits of your code appear.
Release the button.
7. Press “HR’ until the first one or two
digits of your code appears.
on tine display.
verification.
8. Press “A”.” “rEP” will appear
9. Repeat steps 5 through 7 for
10. Press “A”.” “SEC” will appear
on the display. This means that your audio system is secured.
. . .I20
ProCarManuals.com

Shutting Off the Theft-Deterrent
Feature
If your audio system is secured (“SEC”
shows on display) and you wish to disable
it, enter your security code as follows,
pausing no more than
15 seconds between
steps:
1. Turn the ignition on. Make sure the
audio system is
off. The time will
show
on the display.
together until “SEC” shows on the
display.
3. Press “MIN.” “Oi>O,’ will appear on
the display.
4. Press “MIN’ again and hold until the
last two digits of your code appear.
Release
the button.
5. Press “HR’ until the first one or two
digits of your code appear.
6. Press “AM/FM.” If “---” shows, you
have shut off the theft-deterrent
feature. If “SEC” shows, your aud
system is still secured.
NOTE: If you lose or forget your security
code, see your dealer for assistance.
2. Press pushbuttons “1” and “4”
4
Unlocking the Audio System after a
Power Failure
If power is disrupted to the audio system
while in the “SEC” mode, the unit will
not work and “LOC” will show on the
display whenever the ignition is on. To
unlock the unit:
1. Press “MIN.” “000” will appear on
the display.
2. Press “MIN’ again and hold until the
last two digits of your code appear,
Release the button.
3. Press “HR’ until the first one or two
4. Press “AM/FM.” “SEC” will appear
digits
of your code appear.
on the display and the unit will work.
If “LOC” shows, the numbers did not
match and the unit is still locked.
How to Change Your Security Code
You can change your security code by
following these steps:
1. Using your old code, follow the
directions given under “Shutting
Off
the Theft-Deterrent Feature.”
2. Repeat directions of “Setfing Your
Security Code” with your new
security code.
Understanding Radio Reception
FM Stereo
FM stereo will give you the best sound.
But FM signals will reach only about
10 to 40 miles (16 to 65 km). And, tall
buildings or hills can interfere with
FM signals, causing the sound to come
and go.
AM
The range for most AM stations is greater
than for FM, especially at night. The
longer range, however, can cause stations
to interfere with each other. AM can pick
up noise from things like storms and
power lines. Try reducing the treble to
reduce this noise if you ever get it.
AM Stereo
This means the Delco@ system can
receive C-QUAM@ stereo broadcasts.
Many AM stations around the country
use C-QUAM@ to prodyce stereo, though
some do not. (C-QUAM@
is a registered
trademark
of Motorola, I&) If your
Delco@ system can get C-QUAM@, your
“STEREO” light will come on when
you’re receiving it.
121 ...
ProCarManuals.com