lock PONTIAC GRAND-AM 1995 Owner's Manual

Four Speed Automatic
I I ,*. . . . .,
PARK (P): This locks your front wheels. It’s the best
position to use when you start your engine because your
vehicle can’t move easily.
Ensure the shift lever is fully in PARK (P) range before
starting the engine. Your Pontiac has
a brake-transaxle
shift interlock. You have to fully
apply your regular
2-18
ProCarManuals.com

Shifting Into PARK (P)
(Automatic Transaxle Models Only)
2. Move the shift lever into
this:
Hold in the button on
Push the lever all the
your vehicle.
PARK (P) position like
I the lever.
way toward the front of
1. Hold the brake pedal down with your right foot and 3. Move the ignition key to LOCK.
set the parking brake. 4. Remove the key and take it with you. If you can
walk away from your vehicle with the ignition key in
your hand, your
vehicle is in PARK (P)
2-26
ProCarManuals.com

Leaving Your Vehicle With the Engine Running (Automatic Wansaxle Models Only)
If you have to leave your vehicle with the engine
running, be sure your vehicle is in PARK (P) and your
parking brake is firmly set before you leave it. After
you’ve moved the shift lever into the PARK (P)
position, hold the regular brake pedal down. Then, see if
you can move the shift lever away from PARK (P)
without first pushing the button.
If you can, it means that the shift lever wasn’t fully
locked into PARK (P).
Torque Lock (Automatic Transaxle)
If you are parking on a hill and you don’t shift your
transaxle into PARK (P) properly, the weight of the
vehicle may put too much force on the parking pawl in
the transaxle. You may find it difficult to pull the shift
lever out of PARK (P). This is called “torque lock.” To
prevent torque lock, set the parking brake and then shift
into PARK (P) properly before you leave the driver’s
seat. To find out how, see “Shifting Into PARK (P)” in
the Index.
When you are ready to drive, move the shift lever out of
PARK (P)
before you release the parking brake.
If “torque lock” does occur, you may need to have
another vehicle push yours a little uphill to take some of
the pressure from the transaxle,
so you can pull the shift
lever out of PARK (P).
2-27
ProCarManuals.com

Shifting Out of PARK (P)
(Automatic Transaxle Models Only)
Your Pontiac has a brake-transaxle shift interlock. You
have to fully appZy your regular brakes before you can
shift from PARK (P) when the ignition is in the RUN
position. See “Automatic Transaxle” in the Index.
If you cannot shift out of PARK (P), ease pressure on
the shift lever
-- push the shift lever all the way into
PARK
(P) -- as you maintain brake application. Then
move the shift lever into the gear you want. (Press the
shift lever button before moving the shift lever.)
If you ever hold the brake pedal down but still can’t
shift out of PARK (P), try this:
1. Turn the key to OFF, not LOCK.
2. Apply and hold the regular brake until the end of
Step 4.
3. Shift to NEUTRAL (N).
4. Start the vehicle and then shift to the drive gear you
want,
5. Have the vehicle fixed as soon as you can.
Parking Your Vehicle (Manual
Transaxle Models Only)
Before you get out of your vehicle, put your manual
transaxle in
REVERSE (R) and firmly apply the parking
brake.
If you are parking on a hill, or if your vehicle is
equipped to tow
a trailer, see ‘Towing a Trailer” in the
Index.
2-28
ProCarManuals.com

Windows
On a vehicle with manual windows, use the window
crank located on the inside of each door to open and
close each window.
Power Windows (Option)
With power windows, switches on the center console
control each of the windows when the ignition
is on. In
addition, each rear passenger door has a control switch
for its own window.
The driver’s window switch has an Auto Down feature.
The driver’s window can be opened to any position by
pressing the rear
of the switch to the first detent. When
the switch is fully depressed, the window will go down
all the way.
To stop the window while it is lowering, press the front
of the switch, then release.
To raise the window, press and hold the switch forward.
Power Window Lock-Out Switch
(Option)
On four-door models, this switch disables the rear
passenger power window switches. Push the switch
forward to lock the windows. Push the switch back to
unlock the window switches.
The lock-out switch prevents rear passengers from
opening and closing windows. The driver can
dill
control all of the windows with the switch in the lock
position.
Horn
You can sound the horn by pressing the horn symbol on
your steering wheel.
2-31
ProCarManuals.com

Tilt Wheel (Option) Turn SignaVMultifunction Lever
A tilt steering wheel allows you to adjust the steering
wheel before you drive.
You can
also raise it to the highest level to give your
legs more room when you exit and enter the vehicle.
To tilt the wheel, hold the steering wheel and pull the
lever. Move the steering wheel
to a comfortable level,
then release the lever to lock the wheel in place.
The lever on the left side of the steering column
includes your:
Turn Signal and Lane Change Indicator
0 Headlamp High-Low Beam
0 Flash-To-Pass Feature
0 Cruise Control (Option)
2-32
ProCarManuals.com

Lamp Controls Parking Lamps
Rotate the switch counterclockwise up to the first
position to turn on:
0 Parking Lamps
Side Marker Lamps
Taillamps
Instrument Panel Lamps
Headlamps
Rotate the switch counterclockwise to the second
position to turn on:
0 Headlamps
Parking Lamps
Side Marker Lamps
Taillamps
Instrument Panel Lamps
Rotate the switch clockwise to
OFF to turn all the lamps
Off.
2-34
ProCarManuals.com

Controlled-Cycle Windshield Wipers (Option) If your vehicle has controlled-cycle wipers, you can set
the wiper speed as slow as
25 seconds between wiper
cycles, or faster. The controlled-cycle delay
is very
useful in light rain or snow.
Move the stalk to DELAY, then rotate the inner band
and choose the delay you want. Rotate the inner band
clockwise for shorter delay times between wiper cycles.
Rotate the band counterclockwise for a longer delay
time between wiper cycles.
With controlled-cycle wipers you can also use MIST for
a single wiper cycle.
2-37
ProCarManuals.com

When the DRL are on, only your high beam headlamps
will be on. The taillamps, sidemarker and other lamps
won’t be on. Your instrument panel won’t be lit up
either.
When it’s dark enough outside, your headlamps will
come on at
full brightness. The other lamps that come
on
with your headlamps will also come on. When it’s
bright enough outside, the regular lamps will go
off and
your high beam headlamps change to the reduced
brightness
of the DRL.
To idle your vehicle with the DRL off, set the parking
brake On a manual transaxle or put the vehicle in
PARK (P) or NEUTRAL (N) on an automatic transaxle,
while the ignition is
in the OFF or LOCK position. Then
start the vehicle. The DRL will stay off until you release
the parking brake on a manual transaxle or shift out
of
PARK (P) or NEUTRAL (N) on an automatic transaxle.
As with any vehicle, you should turn the regular
headlamp system on any time you need it.
Front Reading Lamps (Option)
These lamps and the interior courtesy lamps will come
on when you open the doors.
To turn on a reading lamp when the doors are closed,
press the button. Press
it again to turn the lamp off.
2-44
ProCarManuals.com

To reactivate the interior lamps, either:
The ignition must be turned on
The activated lamp switch must be turned off and
0 A front door must be opened.
The Battery Rundown Protection feature will also be
activated when any door of your vehicle is left open.
Also, if your vehicle is left with the ignition turned off
€or over 24 days, battery power to your clock, audio
system
and Keyless Entry (if you have this option) will
be
turned off to reduce battery drain. When the ignition
is turned on again, battery power will be resupplied.
However, under these conditions, it will be necessary to
reset the clock
and audio system settings.
then on, OR
Inside Manual Daymight Rearview
Mirror
To reduce glare from headlamps behind you, move the
lever toward you to the night position.
2-46
ProCarManuals.com