MPG PORSCHE 911 TURBO 2013 6.G Information Manual

6970 Responsibility | Environment
Recycling
For both technical and ecological
reasons, intelligent lightweight
construction has been fundamental to
Porsche since our first car in 1948.
This forms the basis for achieving low
fuel consumption values in conjunction
with outstanding performance.
On the technical side, we use a high
proportion of aluminum, magnesium,
plastics, and super high-strength sheet
steel. The materials used have been
selected for their ability to withstand
load, yet they are considerably
lighter than conventional steel.On the ecological side, all materials used
are meticulously selected. All synthetic
components are easily recyclable. And
each material is labeled to facilitate its
separation for recycling. The reduction
in the number of plastic variants helps to
ensure more efficient recycling. Recycled
plastics are used where they meet our
exacting technical requirements.
In short, the new 911 Turbo models are
approximately 95 percent recyclable.
In addition, Porsche uses a high
proportion of environmentally
friendly water-based paints. For us,
environmental protection does not begin
at the end of a vehicle’s life. It starts at
the planning and development stage. having the same fuel economy of 17 mpg
in the cit y and 24 mpg on the highway.
Noise
The 911 Turbo models and the new
911 Turbo S comply with all current
noise regulations—without resorting
to engine encapsulation. To achieve
this, we’ve eliminated noise at the
source: Engine components are
more rigid, moving parts lighter,
and tolerances reduced to a
minimum. High-efficiency silencers
and resonators in the intake system
help to reduce noise even further.
Fuel
All Porsche models are designed to
operate on fuels with an ethanol content
of up to 10 percent. Ethanol has a positive
impact on the CO
2 balance since the plants
grown for the production of this biofuel
also absorb CO
2 from the atmosphere.
The release of hydrocarbons from the fuel
system has been minimized, thanks in no
small part to the active carbon filter and the
multilayered material from which the fuel
tank is made. All fuel lines are made from
multilayered plastic, steel, or aluminum.
The new 911 Turbo models have
maximized the fuel-saving technologies,
which results in all the 911 Turbo models

113114
Technical data.
Technical data
9 11 Tu r b o Coupe 911 Turbo Cabriolet 911 T urbo S Coupe 911 Turbo S Cabriolet
Weights
Curb weight 3 , 516 l b . 3,671 lb.3,538 lb. 3,693 lb.
GVWR 4,387 lb. 4,508 lb.4,387 lb. 4,508 lb.
Performance
Top track speed 195 m p h195 m p h197 m p h197 m p h
0 – 60 mph 3.2 secs 3.3 secs– –
0 – 60 mph with Sport Plus but ton 3.0 secs 3.1 secs2.9 secs 3.0 secs
1/4 m i l e 11.3 secs 11.5 secs – –
1/4 mile with Sport Plus but ton 11.1 s e c s 11.3 secs10.9 secs 11.1 s e c s
Fuel consumption/emissions*
City 17 m p g 17 m p g17 m p g17 m p g
Highway 24 mpg24 mpg24 mpg24 mpg
Combined 20 mpg20 mpg20 mpg20 mpg
Dimensions/aerodynamics
Length 17 7. 4 i n .17 7. 4 i n .17 7. 4 i n .17 7. 4 i n .
Width 74 .0 i n .74 .0 i n .74 .0 i n .74 .0 i n .
Height 51.0 i n .50.9 in.51.0 i n .50.9 in.
Wheelbase 96.5 in. 96.5 in.96.5 in.96.5 in.
Luggage compartment volume 9.18 cu. f t .9.18 cu. f t .9.18 cu. f t .9.18 cu. f t .
Trunk capacity 4.06 cu. f t.4.06 cu. f t.4.06 cu. f t.4.06 cu. f t.
Tank capacity (refill volume) 17. 9 g a l .17. 9 g a l .17. 9 g a l .17. 9 g a l .
Drag coef ficient 0.310.310.310.31
911 Turbo Coupe / 911 Turbo Cabriolet 911 Tu rbo S Co upe/ 91 1 Turbo S Cabriolet
Engine
C y linders 66
Displacement 3.8 liters3.8 liters
Power at rpm 520
h

p
@ 6000–6500
r

pm560
h

p
@ 6500 – 6750
r

pm
Max. torque
at rpm 487 lb.- f t.

@ 1950 –5000
r

pm516 l b . - f t .

@ 2100 – 4250
r

pm
Max. torque with overboost
at rpm 524 lb.- f t.

@ 2100 – 4250 rpm 553 lb.-f t.

@ 2200–4000
r

pm
Compression ratio 9.8
: 19

.8
: 1
Transmission
LayoutActive all-wheel driveActive all-wheel drive
PDK 7-speed7-speed
Chassis
Front axleMacPherson strut suspension with anti-roll barMacPherson strut suspension with anti-roll bar
Rear axle Multi-link suspension Multi-link suspension
Steering Electromechanical power steering with electrical powerElectromechanical power steering with electrical power
Turning circle 34.8 f t.34.8 f t.
Brakes 6-piston, aluminum monobloc fixed calipers at front,
4-piston, aluminum monobloc fixed calipers at rear,
discs internally vented and cross-drilled, closed calipers,
brake calipers in red 6-piston, aluminum monobloc fixed calipers at front,

4-piston, aluminum monobloc fixed calipers at rear,
carbon ceramic composite brake discs, vented and cross- drilled,
closed calipers, brake calipers in yellow
Vehicle stabilit y system
P

orsche Stability Management (PSM)
P
orsche Stability Management (PSM)
Standard wheels Front: 8.5J x 20 RO 51; Rear: 11J x 20 RO 56Front: 9J x 20 RO 51; Rear: 11.5J x 20 RO 56
Standard tires Front: 245/35 ZR 20; Rear: 305/30 ZR 20Front: 245/35 ZR 20; Rear: 305/30 ZR 20
*2013 U.S. EPA estimates. Your mileage may var y