ECO mode Ram 3500 2011 Diesel Supplement
[x] Cancel search | Manufacturer: RAM, Model Year: 2011, Model line: 3500, Model: Ram 3500 2011Pages: 170, PDF Size: 0.66 MB
Page 74 of 170

The “TOW/HAUL Indicator Light” will illuminate in the
instrument cluster to indicate when the switch has been
activated. If the “TOW/HAUL” mode is desired, the
switch must be pressed each time the engine is started.
WARNING!
Do not use the “TOW/HAUL” feature when driving
in icy or slippery conditions. The increased engine
braking can cause the rear wheels to slide, and the
vehicle to swing around with the possible loss of
vehicle control, which may cause an accident possi-
bly resulting in personal injury or death.
Torque Converter Clutch
A feature designed to improve fuel economy has been
included in the automatic transmission on your vehicle.
A clutch within the torque converter engages automati-
cally at calibrated speeds. This may result in a slightly
different feeling or response during normal operation in
high gear. When the vehicle speed drops or during
acceleration when the transmission downshifts to first or
second gear, the clutch automatically disengages.
TOW/HAUL Switch
4
STARTING AND OPERATING 73
Page 76 of 170

Shifting
Truck models with manual transmission are equipped
with a clutch interlocking ignition system. The clutch
pedal must be fully pressed to start the vehicle.Fully press the clutch pedal before shifting gears. As you
release the clutch pedal, lightly press the accelerator
pedal.
This transmission has a “creeper” first gear (L=Low)
which should be used to start from a standing position
when carrying a payload or towing a trailer. Damage to
the clutch can result from starting in second or third gear
with a loaded vehicle. An unloaded vehicle may be
launched in second gear. Use each gear in numerical
order – do not skip a gear.
You should use first gear when starting from a standing
position if under heavy load or when pulling a trailer.Recommended Vehicle Shift Speeds
To utilize your manual transmission efficiently for both
fuel economy and performance, it should be upshifted as
listed in recommended shift speed chart. Shift at the
Shift Pattern
4
STARTING AND OPERATING 75
Page 167 of 170

ModeFuel Saver ............................ 30
New Vehicle Break-In Period ................. 6
Noise Control Maintenance ......................... 126
Tampering Prohibited ................... 126
Noise Emission Warranty ...............125,127
Odometer .............................. 13
Trip ................................ 13
Oil Change Indicator ................... 27,137
Oil Change Indicator, Reset ................. 27
Oil, Engine ............................ 131
Capacity ............................ 130
Change Interval ........................ 99
Dipstick ............................. 98
Disposal ............................ 102
Filter .......................... 98,102,131Identification Logo
..................... 100
Materials Added to ..................... 102
Pressure Gauge ........................ 13
Recommendation ...................... 100
Synthetic ............................ 102
Viscosity ............................ 100
Overdrive ............................ 65,71
Overdrive OFF Switch ................... 65,71
Perform Service Indicator, Reset ............. 138
Personal Settings ......................... 34
Power Take-Off Adapter ....................... 78
Take-Off Operation ...................... 78
Power Steering Fluid ..................... 133
Programmable Electronic Features ............. 34
PTO (Power Take-Off) ..................... 78
Radiator Cap (Coolant Pressure Cap) ....... 114,116
166 INDEX