remote control Ram 5500 Chassis Cab 2012 Diesel Supplement

Warning Lights” in “Understanding Your Instrument
Panel” for further information on and “Wait To Start
Light” and pre-heat cycle.
How To Use Remote Start
All of the following conditions must be met before the
engine will remote start:
•Shift lever in PARK
•Doors closed
•Hood closed
•HAZARD switch off
•BRAKE switch inactive (brake pedal not pressed)
•Ignition key removed from ignition switch
•Battery at an acceptable charge level
•RKE PANIC button not pressed
•Fuel meets minimum requirement
•Water In Fuel Indicator Light is not illuminated
•Wait To Start Light is not illuminated
WARNING!
•Do not start or run an engine in a closed garage or
confined area. Exhaust gas contains Carbon Mon-
oxide (CO) which is odorless and colorless. Car-
bon Monoxide is poisonous and can cause serious
injury or death when inhaled.
•Keep Remote Keyless Entry (RKE) transmitters
away from children. Operation of the Remote Start
System, windows, door locks or other controls
could cause serious injury or death.
2
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 9

Stationary Mode
To operate the PTO in this mode the vehicle must meet
the following conditions:
•Be in PARK position (vehicles equipped with auto-
matic transmission)
•Upfitter provider (on/off) switch has been activated
•Parking brake applied (vehicles equipped with
manual transmission)
•Brake pedal must not be applied
•Vehicle engine must be running
•No vehicle, brake or clutch switch faults present
•PTO must be correctly installed using the vehicle
provided circuits
The customer has the choice to operate the PTO by
utilizing the cruise control switches or by utilizing a remote control (provided by the PTO supplier). To oper-
ate the feature using the cruise control switches, the
customer must first activate the upfitter-provided on/off
switch which will turn on the PTO. In order to increase or
decrease the engine idle speed, to optimize the PTO
function, the “RESUME/ACCEL” and “DECEL” cruise
switches can be used respectively. To disengage PTO
operation and return to “standard vehicle operation”
simply turn the upfitter-provided on/off switch to the
OFF position.
The torque converter lockup clutch will automatically
engage at engine speeds above 1,200 RPM (engine speed)
in PTO stationary mode. Once engaged, the lockup clutch
will remain on and not disengage until the engine speed
is below 1,000 RPM. Lockup clutch engagement is desir-
able for certain types of PTO applications (AS68RC
Six-Speed Automatic Transmission Only).
4
STARTING AND OPERATING 79

Trip .............................17,18
Oil Change Indicator ..................... 139
Oil, Engine ............................ 134
Capacity ........................... 133
Change Interval ..................... 101
Dipstick ........................... 100
Disposal ........................... 104
Filter ........................ 100,104,134
Identification Logo ................... 102
Materials Added to ................... 104
Pressure Gauge ....................... 17
Recommendation ..................... 102
Synthetic .......................... 104
Viscosity ........................... 103
Overdrive ............................ 62,72
Overdrive OFF Switch ................... 62,72
Perform Service Indicator, Reset ............. 140Power
Take-Off Adapter ..................... 78
Take-Off Operation .................... 78
Power Steering Fluid ..................... 136
PTO (Power Take-Off) ..................... 78
Radiator Cap (Coolant Pressure Cap) ....... 116,118
Remote Control Starting System ....................... 8
Remote Starting System ..................... 8
Resetting Perform Service Indicator ........... 140
Seat Belts Reminder ........................... 24
Selection of Coolant (Antifreeze) .......... 116,134
Shifting ............................... 52
Automatic Transmission ................ 54
Manual Transmission .................. 75
168 INDEX

Signals, Turn............................ 15
Speedometer ............................ 16
Starting .............................. 8,34
Automatic Transmission ................ 34
Engine Block Heater ................. 35,49
Manual Transmission .................. 34
Remote ............................. 8
Starting Procedures ....................... 34
Starting Procedures (Diesel Engines) ........... 34
Steering Wheel Lock .......................... 8
Synthetic Engine Oil ...................... 104
System, Remote Starting .................... 8
Tachometer ............................. 15
Temperature Gauge, Engine Coolant ........... 15
Tip Start ............................... 34
Ti re s Pressure Warning Light ................. 21 Torque Converter Clutch
.................63,74
Tow/Haul ............................. 62
Traction Control ......................... 123
Traction Control Light ..................... 17
Transfer Case Fluid ............................. 136
Transmission Automatic ........................ 54,64
Fluid ............................. 136
Manual .......................... 34,75
Shifting ............................ 52
Trip Odometer ........................ 17,18
Turn Signals ............................ 15
Viscosity, Engine Oil ...................... 103
Voltmeter ............................ 18,41
Warning Lights (Instrument Cluster Description) . . 15
Water Separator, Diesel Fuel ................ 106
8
INDEX 169