technical specifications RENAULT CLIO 1997 X57 / 1.G Petrol Engines Workshop Manual

Renault 1991
ENGINES (petrol)
4 cylinders - Cast-Iron
Types Vehicles
E5F Clio
E6J Extra
Clio
Renault 19
E7F Clio
Renault 19
E7J Extra
Clio
Renault 19
Mé
gane
77 11 193 633APRIL 1997Edition anglaise
."The repair methods given by the manufacturer in this document are based on the
technical specifications current when it was prepared.
The methods ma
y be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories
from which his vehicles are constructed."All cop
yrights reserved by Renault.
Cop
ying or translating, in part or in full, of this document or use of the service partreference numbering system is forbidden without the prior written authority of
Renault
C
Cancels and replaces Part No. 77 11 091 458
Workshop Repair Manual
Page 1 of 1 E_Series_1
04.08.2003 http://jester.com.ua/renault/motors/e/E_Series/css/E_Series_1.htm

ENGINE AND PERIPHERALS
Foreword
10
USE OF THE MANUAL
In this manual you will find three major chapters:
- specifications,
- removal of en
gine,
- reassembl
y of engine.
To repair a component on the vehicle refer to the
Workshop Repair Manual and Technical Notes.
UNITS OF MEASUREMENT
- All the dimensions are expressed in millimetres,
mm (unless otherwise indicated).
The tightening torques:
- in decaNewton metres daN.m
(reminder:
1 daN.m = 1.02 m.kg).
The tightening torques without tolerances
must be kept within
±10°.
- in degrees, the tightening torques without to-
lerances must be kept within
±3 %.
The pressures are in
bars.
10-1
Page 1 of 1 E_Series_3
04.08.2003 http://jester.com.ua/renault/motors/e/E_Series/css/E_Series_3.htm