screen RENAULT KADJAR 2017 1.G R Link 2 Repair Manual

6.3
SEATS (1/3)
Massage
Driver Passenger
Massage
Tonic Relaxing Lumbar
Intensity
Speed
3
On“Seats” menu
From the home screen, press Menu,
Vehicle then Seats to access the fol-
lowing three sub-menus:
– “Massage”;
– “One-touch folding”;
– “Settings”.
“Massage”
Select this menu to control massage
seat.
– “Driver” or “Passenger”.
Select “Driver” 1 or “Passenger” 2
to adjust the operation of the mas-
sage seat.
– “On” / “OFF”.
Press “Massage”, then “On” or “OFF” to activate or deactivate the
driver’s or passenger’s massage
seat depending on the tab se-
lected previously. –
4 Current selected programme.
You can select one of the three fol- lowing programmes:
– “Tonic”;
– “Relaxing”;
– “Lumbar”.
Press + or – to adjust the Intensity
and Speed of the massage. Pop-up menu
To reset your selection, press 3
and
then press “Reset”.
12
4

6.4
SEATS (2/3)
One-touch foldingAll
FoldSettings
Courtesy for passenger seat
Position On
On
“One-touch folding”
This function enables you to fold
down the rear seats. The number of
seats may vary.
– Press the buttons corresponding to the seats you wish to fold down,
then Fold. A message is displayed
on the screen.
– Press “Yes” to confirm.
To fold down all the seats press “All”,
then “Fold”.“Settings”
From the “Seats” menu, press
“Settings”, then select the element
you wish to change from the follow-
ing:
– “Easy access for driver”;
– “Courtesy for passenger seat”;
– “Position”. “Easy access for driver”
Press On or OFF to activate or de-
activate this function. When this func-
tion is activated, the seat moves back
automatically when the driver leaves
the vehicle and resumes its position
when driver returns to the vehicle.
Please refer to the drivers hand-
book for further information.
When moving the rear
seats, ensure that nothing
obstructs the anchorage
points (passenger’s arm or
leg, a pet, gravel, cloth, toys, etc.).
The “One-touch folding” function is
only available if the vehicle is sta-
tionary.
Easy access for driver

6.5
SEATS (3/3)
“Position”
It is possible to store the driving position
of the driver’s seat and of the door mir-
rors to your user profile. For further in-
formation, please refer to the “System”
section.
From the “Seats” menu, press
“Settings”, then “Position”.
“Visual feedback”
If this function is activated, a pop-up settings window is displayed on the
screen when the driver or passenger
adjusts the position of their seat. For further information on adjusting
the seat, please refer to your driver’s
handbook.
“Save”
This function saves the position of the
front seats:
– adjust the position of the relevant seat using the switches on the seat;
– press the seat switch to directly access the “Seats” menu on the mul-
tifunction screen;
– save the current position.
Please refer to the driver’s handbook
for further information.
Recalling a stored position
With the vehicle stationary, press “Call
back” to go to the saved position. A con-
firmation message is displayed on the
screen. Press Yes to go to the saved
position.
“Reset”
To reset your selection in the Settings
menu, press 2 then Reset.“Courtesy for passenger seat”
Press On or OFF to activate or de-
activate this function. When it is ac-
tivated, driver can control passenger
seat from the switches by the driver’s
seat. Please refer to the drivers
handbook for further information.
2
Visual feedback On
Call back
Save
Settings
Courtesy for passenger seat
Position On
On
Easy access for driver

6.6
MULTI-SENSE (1/2)
Mode configuration
Press 1, then “Current mode configura-
tion”.
You have various parameter values
which enable you to customize vehicle
systems:
– “Steering”;
– “4RD”;
– “Damping”;
– “Powertrain”;
– “Thermal comfort”;
– “Display”;
– «Engine sound design»;
– “Ambient light”;
– “Driver massage”. Note: for several modes, some system
options may be greyed out and you
cannot select these parameter values.
Note: it is only possible to customise
the mode currently in use if you have
first selected “Perso” mode.
Multi-Sense
Sport Eco
Neutral Comfort Perso
1
Menu
« Multi-Sense »
You have a possibility to customize the
behaviour of some vehicle systems.
Accessing the Multi-Sense menu
From the home screen, press Menu,
Vehicle then Multi-Sense to access
the Multi-Sense menu. You can also
access by pressing Multi-Sense on the
central control.
Selecting mode
From the “Multi-Sense” menu, select
the desired mode among five modes:
– “Comfort”;
– “Sport”;
– “Eco”;
– “Neutral”;
– “Perso”.
To find out more about each of these
modes, please see your driver’s hand-
book.
Multi-Sense Sport
Eco
Neutral
Comfort
Perso
1
A video is available to view a dem-
onstration of Multi-Sense mode.
With the vehicle at a standstill,
press 1, then About.

6.7
MULTI-SENSE (2/2)
Quick access to favourite modes
Once the “Multi-Sense" menu is dis-
played on the multimedia screen, suc-
cessive presses on the "Multi-Sense"
control allow you to switch between the
two favourite modes that you have se-
lected. To configure your two favourite
modes, press 1 then “Customize pre-
ferred modes”.Reset parameter values
Press 1, then “Reset current mode” to
the default values. Depending on the
mode selected, the Dual function can
be activated and adjusted. For further
information about this function, please
refer to section 3 of your drivers hand-
book.
Multi-Sense
Sport Eco
Neutral Comfort Perso
1
Multi-Sense Sport
Eco
Neutral
Comfort
Perso
1

6.8
DRIVING AIDS (1/2)
“Lane departure warning setting”
Press this menu to adjust the audio
volume and the lane departure warning
sensitivity.
– “Volume”: press “+" or "– " to adjust
the volume level (five levels).
– “Sensitivity”: select “Low”, “Middle” or “High” to adjust the warning sen-
sitivity.
Note: if “Lane departure warning” is
switched “OFF”, the “Lane departure
warning setting” function is greyed out. “Distance warning”
This system notifies the driver when
they are too close to other vehicles.
Please refer to the drivers handbook
for further information. Select “On” to
activate the system.
For safety reasons, carry
out these operations when
the vehicle is stationary.
“Driving
assistance”
menu
From the home screen, press Menu,
Vehicle then Driving assistance to
access the following items:
– “Lane departure warning”;
– “Lane departure warning setting”;
– “Distance warning”;
– “Active braking”;
– “Blind spot alert”;
– “Speed alert settings”;
– “Traction control”;
– “Automatic high beam”.
“Lane departure warning”
This system notifies the driver when
they inadvertently cross a continuous or
broken line. Please refer to the drivers
handbook for further information. To ac-
tivate it, select On.
Driving assistance
Lane departure warning
Lane departure warning setting
On
On On
Auto Expert
Distance warning
Active braking
Blind spot alert
Speed alert settings
Traction control
Driving assistance
Lane departure warning
Lane departure warning setting
Active braking
On OFF

6.10
PARKING AIDS (1/3)
Parking sensors
Rear parking sensors
Sound alertSound type
Front parking sensors
Side parking sensorsOn
On
On
On"Parking
assistance"
menu
From the home screen, press Menu,
Vehicle then Parking assistance to
access the following elements:
– "Parking sensors";
– "Rear view camera";
– "Easy park assist".
Note: to reset and return to default
settings for the three elements above,
press 1, then "Reset". Note: if the "Sound alert" function is
set to "OFF", the "Sound type" and
"Volume" functions are disabled.
"Sound type"
Select a type of audio alert from the
three choices offered.
"Volume"
Adjust the obstacle detection volume
by pressing + or -.
1
"Parking sensors";
Press On or OFF to activate or deac-
tivate the front, side and/or rear park-
ing sensors.
"Sound alert"
Select On or OFF to activate or deac-
tivate the audio parking alerts.
Sound type Parking sensors
Volume
A video is available to demonstrate
how to use the parking aids. With
the vehicle at a standstill, from the
Parking assistance menu, press the
pop-up menu button, then About.

6.13
DRIVING ECO2 (1/4)
“Standard”
This screen enables you to view the
data for your current journey:
– Score evolution;
– “General score”;
– “Distance without fuel consumption”.
Score evolution
This bar diagram shows the progress of
your score.
– score above the green line (75%): eco-driving;
– score below the orange line (45%): not eco-driving.
Eco-CoachingDriving eco2
Standard
“General score”
This shows your current score. The
sheet is updated based on your score,
from 0 to 100.
“Distance without fuel
consumption”
Shows the distance travelled without
consuming fuel during your journey.
Advanced
Score history
General score Distance without consumption
Menu
« Driving eco2 »
From the home screen, press Menu,
Vehicle then Driving eco2 to access the
following menus:
– “Standard”;
– “Advanced”;
– “Eco-Coaching”.
Driving eco2
Standard Advanced
Eco-Coaching
Score historyInsufficient distance travelled
3
80
80
3

6.14
“Advanced”
This screen shows information about
your current journey:
– data;
– breakdown of scores;
– general score;
– Distance without consumption.
Journey data
The following on-board computer data
is displayed:
– total distance travelled;
– average speed;
DRIVING ECO2 (2/4)
– average fuel consumption.
Score trend 1
The positions of the arrow show the fol-lowing:
– the new score is higher than that of the previous journey: up arrow,
– the new score is lower than that of the previous journey: down arrow,
– the new score is the same as that of the previous journey: the arrow is
shown at the horizontal.
2
Driving eco2
Standard
Acceleration
Changing gear
Anticipation
Advanced
Eco-Coaching
General score Distance without consumption
1
Score history 2
The number of stars (5 levels) is given
based on the scores (0 to 10), based
on:
– acceleration;
– gear changing;
– anticipation.
General score and distance without
fuel consumption
For further information, please refer to
the previous page.
Driving eco2
Standard Advanced
Distance without consumption
Eco-Coaching
Acceleration
Changing gear
80
70
4,5
4
1 80
Anticipation

6.15
DRIVING ECO2 (3/4)
“Eco-Coaching”
This menu monitors your driving style
and gives general advice on eco-driv-
ing (energy efficient and fuel-burning
actions, how to load the vehicle, what
tyre pressures, how to plan the trip,
etc.).
To access this menu, press Eco-
Coaching and read the advice carefully.
Scroll through the pages by pressing
“General”, “Acceleration”, Change gear
and Anticipation.
Note: “Eco-Coaching” is disabled in the
following cases:
– if the vehicle speed is lower than the Eco-Coaching threshold;
Note: The default “Eco-Coaching”
threshold value is around 6 mph
(10 km/h).
– if the distance travelled does not exceed 400 meters since the last
reset.
Add trip
3
Driving eco2
Standard
Score history
Advanced
Eco-Coaching
General score Distance without consumption
Start a new journey
To reset your journeys, press
3, then
Start a new trip. A message will ask you
to confirm the data reset. Press “Yes” to
confirm or “No” to cancel.
Note: The on-board computer trip data
is reset at the same time.
Clear score evolution
To reset your score progress, press 3,
then “Delete history”. A confirmation
message is displayed on the screen.
Press Yes to delete the history or on No
to cancel.
“My favourite journeys”
From the Driving eco2 menu, press 3 ,
then “My favourite journeys”.