tow RENAULT KANGOO 2001 KC / 1.G 4x4 - Mechanism And Accessories And Trim And Upholstery Workshop Manual

EXTERIOR PROTECTION
Front bumper
55
55-2
Release:
– the clips (I) and (J), then remove the grilles,
– the clips (K), then remove the towing hitch access
cover.
A

EXTERIOR PROTECTION
Side protective mouldings
55
55-3
Side protective mouldings
REMOVING THE FRONT DOOR MOULDING
Remove the bolt (A).Slide the moulding towards the rear of the vehicle (1).
IMPORTANT: the indexing clips (B) cannot be
removed without being damaged, so always fit new
ones after removal (e.g. after a panel straightening
operation).
B

EXTERIOR PROTECTION
Side protective mouldings
55
55-4
Release the two clips (C), then remove the badge.
REMOVING THE REAR DOOR MOULDING
Slide the moulding towards the front of the vehicle (2).Remove the strips as illustrated above.
SPECIAL FEATURES OF REFITTING THE FRONT
AND REAR DOOR MOULDINGS
Position the strips on the moulding, then clip the
moulding to the door.
NOTE: only indexing strips can be left on the panel
while the mouldings are removed.
B