ECU RENAULT KANGOO 2013 X61 / 2.G Power Steering Pump Assembly Workshop Manual

36B-8V1 MR-376-X76-36B000$060.mif
36B
GEPDA
Vdiag No.: 04
SETTINGS
VP001: Write VIN.
This command permits manual entry of the vehicle's VIN into the computer.
Use this command each time the pump assembly of the power-assisted steering is replaced.
Check that the configuration is correct by reading the identification ID010 V.I.N. code.
VP005: Enter After-Sales operation date.
This command allows is used to manual enter the date of the last After-Sales operation on the pump
assembly system of the power-assisted steering.
Use this command after every operation, whether mechanical or electric/electronic, on the pump
assembly of the power-assisted steering.
Consecutively enter the six figures of the date: two for the year, two for the month and two for the
day. E.g. 000706 (06 July 2000).
Check that the configuration is correct by reading the identification ID018 Read last After-Sales
operation date.
POWER-ASSISTED STEERING PUMP ASSEMBLY
Fault finding – Programming