reset RENAULT KOLEOS 2015 1.G Owners Manual
[x] Cancel search | Manufacturer: RENAULT, Model Year: 2015, Model line: KOLEOS, Model: RENAULT KOLEOS 2015 1.GPages: 232, PDF Size: 18.18 MB
Page 40 of 232
JauneNoir Noir texte
40
ENG_UD31690_8
S curit enfants : d sactivation, activation airbag passager avant (X45 - H45 - Renault) ENG_NU_1057-1_H45_Ph3_Renault_1
CHILD SAFETY: deactivating, activating the front passenger air bag (1/3)
Deactivating the front
passenger airbags
(on equipped vehicles)
You must deactivate the devices in ad-
dition to the front passenger seat belt
before fitting a child seat in the front
passenger seat.To deactivate the air bags: with the
vehicle stationary, insert the inte-
grated key into the switch 1 then push it
and turn it to the OFF position.
With the ignition on, you must check
that the indicator light is lit on the instru-
ment panel 2 or on the central display
and, depending on the vehicle, that the
message “Passenger airbag off” is dis-
played.
This light remains continuously lit to
let you know that you can fit a child
seat.
2
1
The passenger air bag must
only be deactivated or acti-
vated with the ignition off.
If it is interfered with when
the vehicle is being driven, indicator
lights
å and © will come
on.
Switch the ignition off then on again
to reset the air bag in accordance
with the lock.
DANGER
Since operation of the front
passenger air bag is not
compatible with the position
of a rear-facing child seat, NEVER
fit a rear-facing child seat on a front
passenger seat with an active front
air bag. The child may suffer very
serious injuries if the air bag is trig-
gered.
Page 42 of 232
JauneNoir Noir texte
42
ENG_UD31690_8
S curit enfants : d sactivation, activation airbag passager avant (X45 - H45 - Renault) ENG_NU_1057-1_H45_Ph3_Renault_1
CHILD SAFETY: deactivating, activating the front passenger air bag (3/3)
Activating the front
passenger air bags
You should reactivate the air bag as
soon as you remove the child seat from
the front passenger seat to ensure the
protection of the front passenger in the
event of an impact.
To reactivate the air bags: with the
vehicle stationary, insert the inte-
grated key into the lock 1 then push it
and turn it to the ON position.
With the ignition on, you must check
that the indicator light on the instrument
panel 2 or on the central display is off.
The front passenger seat belt additional
restraint systems are activated.
2
1
Operating faults
In the event of a fault, warning light
å flashes and warning light ©
lights up on the instrument panel ac-
companied by the message “check air
bag”.
Contact your approved dealer as soon
as possible.
The passenger air bag must
only be deactivated or acti-
vated with the ignition off.
If it is interfered with when
the vehicle is being driven, indicator
lights
å and © will come
on.
Switch the ignition off then on again
to reset the air bag in accordance
with the lock.
It is forbidden to fit a rear-facing child
seat to the front passenger seat if the
air bag activation/deactivation system
is faulty.
Allowing any other passenger to sit in
that seat is not recommended.
Page 43 of 232
JauneNoir Noir texte
43
ENG_UD20778_4
Heure et temp rature ext rieure (X45 - H45 - Renault) ENG_NU_1057-1_H45_Ph3_Renault_1
CLOCK AND EXTERNAL TEMPERATURE
With the ignition on, the clock and the
exterior temperature are displayed.
Resetting clock 1Refer to the specific equipment instruc-
tions (navigation system, radio) for the
particular features.
External temperature
indicator
As ice formation is related
to climatic exposure, local
air humidity and temperature, the
external temperature alone is not
sufficient to detect ice.
External temperature
indicator
Special note:
When the outside temperature is –3°C
to +3°C, the °C characters flash (signal-
ling a risk of black ice on the road).
Note: in some cases (vehicle stopped
for less than 3 hrs 30 mins), the infor-
mation displayed on the screen when
the ignition is switched on may be in-
correct.
1
If the power supply is cut (battery
disconnected, supply wire cut, etc.),
the clock must be reset.
We recommend that you do not
adjust these settings while driving.
Page 55 of 232
JauneNoir Noir texte
55
ENG_UD31418_9
Ordinateur de bord (X45 - H45 - Renault) ENG_NU_1057-1_H45_Ph3_Renault_1
TRIP COMPUTER AND WARNING SYSTEM (2/10)
3
Trip mileage resetting
With “trip mileage recorder” selected on
the display, press button 2 or 3 until the
mileage recorder resets to zero.
Resetting the journey
parameters (reset button)
With one of the journey parameters se-
lected on the display, press button 2
or 3 until the display resets.
Interpreting some of the
values displayed after
resetting
The values showing average fuel con-
sumption, range and average speed
will become more stable and reliable
the further you travel after pressing the
reset button.
For the first few miles after pressing
the reset button you will notice that the
range increases as you travel. This
range takes into account the average
fuel consumption since the last time the
reset button was pressed. Therefore,
the average fuel consumption may de-
crease when:
– the vehicle is no longer accelerating;
– the engine reaches its operating
temperature (if the engine was cold
when reset button was pressed);
– when driving from an urban area
onto the open road.
Automatic resetting of the
journey parameters
Resetting occurs automatically when
the maximum value of any of the pa-
rameters is exceeded.2
Page 56 of 232
JauneNoir Noir texte
56
ENG_UD31418_9
Ordinateur de bord (X45 - H45 - Renault) ENG_NU_1057-1_H45_Ph3_Renault_1
TRIP COMPUTER AND WARNING SYSTEM (3/10)
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.
Examples of selections Interpreting the display selected
a) Total mileage and trip mileage recorder. 123456 km
1234.5 km
b) Journey parameters.
Fuel used since the last reset. Fuel used
25 L
Average fuel consumption since the last reset.
This value is displayed after having travelled at least 500 metres since the
last reset. Average
7.2 L/100
Page 57 of 232
JauneNoir Noir texte
57
ENG_UD31418_9
Ordinateur de bord (X45 - H45 - Renault) ENG_NU_1057-1_H45_Ph3_Renault_1
TRIP COMPUTER AND WARNING SYSTEM (4/10)
The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.
Examples of selections Interpreting the display selected
Current fuel consumption
This value is displayed above a speed of approximately 20 mph (30 km/ h). Current
9.2 L/100
Estimated range with remaining fuel
This range takes into account the average fuel consumption since the last time
the reset button was pressed. The value is displayed after driving 500 metres. Range
160 km
Distance travelled since the last reset Distance
275.5 km
Average speed since the last reset.
The value is displayed after driving 500 metres. Average
58.9 km/h
Page 58 of 232
JauneNoir Noir texte
58
ENG_UD31418_9
Ordinateur de bord (X45 - H45 - Renault) ENG_NU_1057-1_H45_Ph3_Renault_1
TRIP COMPUTER AND WARNING SYSTEM (5/10)
Examples of selections Interpreting the display selected
c) Mileage before service.
Distance remaining until the next service. When the distance value ap-
proaches the limit, there are several possible scenarios:
– mileage before service less than 900 miles (1,500 km): the message
“Service due in” is displayed, accompanied by the remaining mileage;
– distance equal to 0 miles or service date reached: the message
“Service due” is displayed accompanied by warning light
©.
The vehicle requires a service as soon as possible. “Service due in 1432 km”
“Service due”
Note: depending on the vehicle, the mileage before a service changes according to driving style (frequent driving at low speeds,
door-to-door journeys, extensive use at idle speed, towing, etc.). The distance remaining until the next service can therefore de-
crease more quickly in some cases than the actual distance travelled.
Resetting the display after service in accordance with the maintenance schedule
The mileage before service must only be reset after a service which complies with the recommendations in the Maintenance
Service Document. If you decide to change the oil more frequently, do not reset this data each time the oil is changed to avoid
exceeding the replacement intervals for other parts in the maintenance schedule.
To reset the distance before service, press and hold one of the display reset buttons for approximately 10 seconds until the dis-
play shows the mileage permanently. The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.
Page 65 of 232
JauneNoir Noir texte
65
ENG_UD7744_2
Rétroviseurs (X45 - H45 - Renault) ENG_NU_1057-1_H45_Ph3_Renault_1
REAR VIEW MIRRORS
Door mirrors
With the engine running, move
button 1:
– position C to adjust the left-hand
door mirror;
– position E to adjust the right-hand
door mirror;
D is the inactive position.
Folding door mirrors
With the engine running, move
button 1 to position F: the door mirrors
fold away.
To reset them for driving, return to posi-
tion C, D or E.
Heated door mirrors
Mirror de-icing is carried out at the
same time as rear screen de-icing.
The driver’s door mirror
may have two clearly de-
fined zones. Zone B shows
what can normally be seen
in an ordinary rear-view mirror.
Zone A increases rear side visibility
for greater safety.
The objects in zone A look much
further away than they really are.
1
CDE
F
AB
Interior rear view mirror
Its position can be adjusted.
Rear view mirror with lever 2
For night driving, to avoid being dazzled
by the headlights of the car behind you,
flip the small lever 2 located behind the
rear view mirror.
Rear view mirror without lever 2
The rear view mirror darkens automati-
cally at night if you are being followed
by a vehicle with its lights on.
2