ECU RENAULT PULSE 2012 1.G Owner's Manual
[x] Cancel search | Manufacturer: RENAULT, Model Year: 2012, Model line: PULSE, Model: RENAULT PULSE 2012 1.GPages: 352, PDF Size: 6.46 MB
Page 104 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
3-8Pre-driving checks and adjustments
JVP0222XType B (without panic alarm)*1LOCK button
*2U\fLOCK button
*3Batte\by indicato\b light
Locking doo\bs
1. Remove the key f\bom the ignition switch.
2. Close all doo\bs including the back doo\b.
3. Push the “LOCK”
button*1on the \bemote
cont\bolle\b.
4. All doo\bs will be locked.
5. Ope\bate doo\b handles to confi\bm that the doo\bs have been secu\bely locked.
CAUTION:
After locking the doors using the remote con-
troller, be sure that the doors have been securely
locked by operating the door handles.
Unlocking doo\bs
1. Push the “U\fLOCK”button*2on the
\bemote cont\bolle\b.
2. All doo\bs including the back doo\b will be unlocked.
All doo\bs will be locked automatically unless one of the
following ope\bations is pe\bfo\bmed within 30 seconds
afte\b pushing the “U\fLOCK”
button*2on the
\bemote cont\bolle\b while the doo\bs a\be locked.
If du\bing this 30-second time pe\biod, the “U\fLOCK”
button on the \bemote cont\bolle\b is pushed, all doo\bs will
be locked automatically afte\b anothe\b 30 seconds.
. Opening any doo\bs.
. Inse\bting the key into the ignition switch.
Selecting door unlock mode (if equipped) :
When you fi\bst \beceive the vehicle, the doo\b unlock
mode is set to unlock all the doo\bs with one push of the
“U\fLOCK”
button*2. The doo\b unlock mode
can be switched to the selective doo\b unlock mode,
which unlocks the passenge\b’s doo\bs at the second
push of the “U\fLOCK”
button*2.
Selective doo\b unlock mode:
1. Push the “U\fLOCK”
button*2on the
\bemote cont\bolle\b.
2. The d\bive\b’s doo\b unlocks.
3. Push the “U\fLOCK”
button*2on the
\bemote cont\bolle\b again.
4. All doo\bs will be unlocked.
To switch to the selective doo\b unlock mode, pe\bfo\bm
the following p\bocedu\be.
Push the “LOCK”
and “U\fLOCK”buttons
simultaneously fo\b mo\be than 5 seconds.
Pe\bfo\bm the same p\bocedu\be to deactivate the
selective doo\b unlock mode. .
When the selective doo\b unlock mode is set, the
haza\bd indicato\b flashes 3 times.
. When the all doo\b unlock mode is set, the haza\bd
indicato\b flashes once.
Using panic ala\bm (if equipped)
If you a\be nea\b you\b vehicle and feel th\beatened, you
may activate the ala\bm to call attention as follows:
1. Push the “PA\fIC”
button*3on the
Intelligent Key fo\b more than 0.5 second.
2. The theft wa\bning ala\bm will stay on fo\b 25 seconds.
3. The panic ala\bm stops when:
. It has \bun fo\b 25 seconds, o\b
. Any of the buttons on the Intelligent Key a\be
pushed. (\fote: Panic button should be pushed fo\b
mo\be than 0.5 second.)
Batte\by indicato\b light
The batte\by indicato\b light*4(Type A) o\b*3(Type B)
illuminates when you push any button. If the light does
not illuminate, the batte\by is weak o\b needs \beplace-
ment. Fo\b info\bmation \bega\bding \beplacement of a
batte\by, see “Remote cont\bolle\b batte\by” (P.8-24) .
Haza\bd indicato\b ope\bation
When you lock o\b unlock the doo\bs, the haza\bd
indicato\b will flash as a confi\bmation.
. “LOCK”: The haza\bd indicato\b flashes once.
. “U\fLOCK”: The haza\bd indicato\b flashes twice.
& R Q G L W L R Q
Page 106 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
3-10Pre-driving checks and adjustments
CAUTION:
.Do not allow the Intelligent Key, which
contains electrical components, to come
into contact with water or salt water. This
could affect the system function.
. Do not drop the Intelligent Key.
. Do not strike the Intelligent Key sharply
against another object.
. Do not change or modify the Intelligent Key.
. Wetting may damage the Intelligent Key. If
the Intelligent Key gets wet, immediately
wipe until it is completely dry.
. If the outside temperature is below í108C
(148F) , the battery of the Intelligent Key may
not function properly.
. Do not place the Intelligent Key for an
extended period in an area where tempera-
tures exceed 608C (1408F) .
. Do not attach the Intelligent Key with a key
holder that contains a magnet.
. Do not place the Intelligent Key near equip-
ment that produces a magnetic field, such as
a TV, audio equipment and personal compu-
ters or cellular phones.
If an Intelligent Key is lost or stolen, \fENA\bLT
recommends erasing the ID code of that Intelligent
Key from the vehicle. This may prevent the unauthor-
ized use of the Intelligent Key to operate the vehicle.
For information regarding the erasing procedure,
contact a \fENA\bLT dealer.
The Intelligent Key function can be disabled. For
information about disabling the Intelligent Key function,
contact a \fENA\bLT dealer.
OPE\fATING \fANGE
SPA2038
The Intelligent Key functions can only be used when
the Intelligent Key is within the specified operating
range from the request switch
*1.
When the Intelligent Key battery is discharged or
strong radio waves are present near the operating
location, the Intelligent Key system’s operating range
becomes narrower, and the Intelligent Key may not
function properly.
The operating range is within 80 cm (31.50 in) from
each request switch
*1.
If the Intelligent Key is too close to the door glass,
handle or rear bumper the request switches may not
function.
When the Intelligent Key is within the operating range,
it is possible for anyone, even someone who does not
carry the Intelligent Key, to push the request switch
and lock/unlock the doors.
\bSING INTELLIGENT KEY SYSTEM
JVP0088X
The request switch will not function under the following
conditions:
. When the Intelligent Key is left inside the vehicle
. When the Intelligent Key is not within the
operational range
. When any door is open or not closed securely
. When the Intelligent Key battery is discharged
. When the ignition switch is in the “ACC” or “ON”
position
& R Q G L W L R Q
Page 110 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
3-14Pre-driving checks and adjustments
SymptomPossible cause\fction to take
W\ben pus\bing t\be request switc\b or t\be
“LOCK”
button on t\be Intelligent
Key to lock t\be door T\be outside c\bime sounds for a few
seconds and all t\be doors unlock.T\be Intelligent Key is inside t\be ve\bicle. Carry t\be Intelligent Key wit\b you.
T\be ignition switc\b is in t\be “\fCC” or
“ON” position.
Pus\b t\be ignition switc\b to t\be “OFF”
position.
\f door is not closed securely. Close t\be door securely.
W\ben pus\bing t\be door \bandle request
switc\b to lock t\be door T\be outside c\bime sounds for a few
seconds.T\be Intelligent Key is inside t\be ve\bicle. Carry t\be Intelligent Key wit\b you.
\f door is not closed securely.
Close t\be door securely.
W\ben pus\bing t\be ignition switc\b to start
t\be engine Type \f: T\be Intelligent Key battery
indicator appears on t\be display.
Type B: T\be Intelligent Key system
warning lig\bt in t\be meter blinks in green.
T\be battery c\barge is low.
Replace t\be battery wit\b a new one. (See
“Battery” (P.8-23) .)
Type \f: T\be NO KEY warning appears on
t\be display and t\be inside warning c\bime
sounds for a few seconds.
Type B: T\be Intelligent Key system
warning lig\bt in t\be meter blinks in yellow
and t\be inside warning c\bime sounds for
a few seconds. T\be Intelligent Key is not in t\be ve\bicle.
Carry t\be Intelligent Key wit\b you.
& R Q G L W L R Q
Page 111 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
USING REMOTE KEYLESS ENTRY FUNC-
TION
Oper\ftin\b r\fn\be
SPA2252Type A (with panic alarm)
SPA2045Type B (without panic alarm)It is possible to lock/unlock \fll doors includin\b the b\fck
door usin\b the remote keyless entry system. The
oper\ftin\b dist\fnce depends upon the conditions
\fround the vehicle. To securely oper\fte the lock \fnd
unlock buttons, \fppro\fch the vehicle to \fbout 1 m (3.3
ft) from the door.
The remote keyless entry system will not function under
the followin\b conditions:.
When the Intelli\bent Key is not within the
oper\ftion\fl r\fn\be.
. When the Intelli\bent Key b\fttery is disch\fr\bed.
For inform\ftion re\b\frdin\b the repl\fcement of \f b\fttery,
see “B\fttery” (P.8-23) .
Lockin\b doors
When you lock or unlock the doors includin\b the b\fck
door, the h\fz\frd indic\ftor will fl\fsh \fs \f confirm\ftion.
1. Pl\fce the i\bnition switch in the “OFF” position \fnd c\frry the Intelli\bent Key.
2. Close \fll doors (includin\b the b\fck door) .
3. Push the “LOCK”
button*1on the
Intelli\bent Key.
4. All doors will be locked.
5. Oper\fte the door h\fndles to confirm th\ft the doors h\fve been securely locked.
CAUTION:
After locking the doors using the Intelligent Key,
be sure that the doors have been securely
locked by operating the door handles.
Unlockin\b doors
1. Push the “UNLOCK”button*2on the
Intelli\bent Key.
2. All doors (includin\b the b\fck door) will be unlocked.
All doors will be locked \futom\ftic\flly unless one of the
followin\b oper\ftions is performed within 30 seconds
\ffter pushin\b the “UNLOCK”
button on the
Intelli\bent Key while the doors \fre locked. If durin\b this
30-second time period, the “UNLOCK”
button on
the Intelli\bent Key is pushed, \fll doors will be locked
\futom\ftic\flly \ffter \fnother 30 seconds. .
Openin\b \fny door or b\fck door.
. Pushin\b the i\bnition switch.
Selecting door unlock mode (if equipped) :
When you first receive the vehicle, the door unlock
mode is set to unlock \fll the doors with one push of the
“UNLOCK”
button*2. The door unlock mode
c\fn be switched to the selective door unlock mode,
which unlocks the p\fssen\ber’s doors \ft the second
push of the “UNLOCK”
button*2
Selective door unlock mode:
1. Push the “UNLOCK”
button*2on the
Intelli\bent Key.
2. The driver’s door unlocks.
3. Push the “UNLOCK”
button*2on the
Intelli\bent Key \f\b\fin.
4. All doors will be unlocked.
To switch to the selective door unlock mode, perform
the followin\b procedure.
Push the “LOCK”
\fnd “UNLOCK”buttons
simult\fneously for more th\fn 5 seconds. Perform the
s\fme procedure to de\fctiv\fte the selective door
unlock mode.
. When the selective door unlock mode is set, the
h\fz\frd indic\ftor fl\fshes 3 times.
. When the \fll door unlock mode is set, the h\fz\frd
indic\ftor fl\fshes once.
Pre-driving checks and adjustments3-15
& R Q G L W L R Q
Page 112 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
3-16Pre-driving checks and adjustments
Using panic alarm (if eq\fipped)
If \bo\f are near \bo\fr vehicle and feel threatened, \bo\f
ma\b activate the alarm to call attention as follows:
1. P\fsh the “PANIC”
b\ftton*3on the
Intelligent Ke\b for more than 0.5 second.
2. The theft warning alarm will sta\b on for 25 seconds.
3. The panic alarm stops when:
. It has r\fn for 25 seconds, or
. An\b of the b\fttons on the Intelligent Ke\b are
p\fshed. (Note: Panic b\ftton sho\fld be p\fshed for
more than 0.5 second.)
Hazard indicator operation
When \bo\f lock or \fnlock the doors, the hazard
indicator will flash as a confirmation.
.“LOCK”: The hazard indicator flashes once.
. “UNLOCK”: The hazard indicator flashes twice. Yo\fr vehicle is eq\fipped with either or both of the
following sec\frit\b s\bstems:
.
Theft warning s\bstem
. Anti-Theft S\bstem*
(* immobilizer)
The sec\frit\b condition will be shown b\b the sec\frit\b
indicator light.
THEFT WARNING SYSTEM
The theft warning s\bstem provides vis\fal and a\fdio
alarm signals if parts of the vehicle are dist\frbed.
Sec\frit\b indicator light
SIC2045
The sec\frit\b indicator light is located in the meter
panel.
This light operates whenever the ignition switch is in
the “ACC”, “OFF” or “LOCK” position. This is normal.
How to activate the system:
1. Close all windows and p\fsh the ignition switch to the “OFF” position.
The system can be activated even if the
windows are open. 2. Carr\b the Intelligent Ke\b with \bo\f and get o\ft of
the vehicle.
3. Make s\fre the hood is closed. Close and lock all doors with the door handle req\fest switch, LOCK
b\ftton*1on the Intelligent Ke\b (If the door
is locked \fsing the inside lock knob, the s\bstem
will not be activated) or power door lock switch (If
the door is locked \fsing the power door lock
switch with all the doors closed, the s\bstem will
not be activated. To activate the s\bstem, lock the
door \fsing the power door lock switch with an\b of
the doors open, then close all the doors) .
4. Confirm that the sec\frit\b indicator light comes on. The sec\frit\b indicator light sta\bs on for approxi-
matel\b 30 seconds. The vehicle sec\frit\b s\bstem is
now pre-armed. After approximatel\b 30 seconds
the vehicle sec\frit\b s\bstem a\ftomaticall\b shifts
into the armed phase. The sec\frit\b light begins to
flash once ever\b approximatel\b 3 seconds.
If, d\fring this 30-second pre-arm time period, the
door is \fnlocked with the door handle req\fest
switch, the “UNLOCK”
b\ftton*2on the
Intelligent Ke\b, the power door lock switch, or the
ignition switch is p\fshed to the “ACC” or “ON”
position, the s\bstem will not arm.
Even when the driver and/or passengers are in
the vehicle, the system will activate with all
doors locked and ignition switch in the “LOCK”
position. Push the ignition switch to the “ACC” or
“ON” position to turn the system off.
Theft warning system operation:
The warning s\bstem will give the following alarm:
. The hazard indicator blinks and the horn so\fnds
intermittentl\b for approximatel\b 30 seconds.
SECURITY SYSTEM (if equipped)
& R Q G L W L R Q
Page 113 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
.The alarm automatically turns off after approxi-
mately \f0 seconds. \bowever, the alarm reacti-
vates if the vehicle is tampered with again.
The alarm is activated by:
. Operating the door without using the Intelligent
Key system.
. Opening the hood.
How to stop alarm:
. The alarm will stop by unlocking a door with the
door handle request switch or “UNLOCK”
button*2on the Intelligent Key.
. The alarm will stop when the ignition switch is
pushed to the “ACC” or “ON” position.
If the system does not operate as described
above, have it checked by a RENAULT dealer.
ANTI-T\bEFT SYSTEM
The Anti-Theft System will not allow the engine to start
without the use of the registered Anti-Theft System
key.
If the engine does not start using the registered Anti-
Theft System key, it may be due to interference caused
by:
. Another Anti-Theft System key.
. Automated toll road device.
. Automated payment device.
. Other devices that transmit similar signals.
Start the engine using the following procedure:
1. Remove any items that may be causing the interference away from the Anti-Theft System key.
2. Leave the ignition switch in the “ON” position for approximately 5 seconds.
\f. Turn the ignition switch to the “OFF” or “LOCK” position, and wait approximately 10 seconds. 4. Repeat steps 2 and \f again.
5. Start the engine.
6. Repeat the steps above until all possible inter-
ferences are eliminated.
If this procedure allows the engine to start, RENAULT
recommends placing the registered Anti-Theft System
key separate from other devices to avoid interference.
FCC WARNING:
Changes or modifications not expressly ap-
proved by the party responsible for compliance
could void the user’s authority to operate the
equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions; (1) This device may not cause harm-
ful interference, and (2) this device must accept
any interference received, including interference
that may cause undesired operation of the
device.
Security indicator light
SIC2045
The security indicator light is located on the meter
panel. It indicates the status of Anti-Theft System.
The light operates whenever the ignition switch is in the “LOCK”, “OFF” or “ACC” position. The security
indicator light indicates that the security systems on
the vehicle are operational.
If Anti-Theft System is malfunctioning, this light will
remain on while the ignition switch is in the “ON”
position.
If the light remains on and/or the engine does
not start, contact a RENAULT dealer for Anti-
Theft System service as soon as possible. Be
sure to bring all Anti-Theft System keys that you
have when visiting a RENAULT dealer for service.
For Right-Hand Drive (RHD) model (for Europe):
If Anti-Theft System is malfunctioning, the security
indicator light will illuminate when the ignition switch is
in the “ON” position. \bowever, if the security indicator
light turns off after 15 minutes, you can start the engine
once. See a RENAULT dealer for Anti-Theft System
service as soon as possible.
Pre-driving checks and adjustments\f-17
& R Q G L W L R Q
Page 114 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
3-18Pre-driving checks and adjustments
WARNING:
.The hood must be closed and latched
securely before driving. Failure to do so
could cause the hood to fly open and result
in an accident.
. Never open the hood if steam or smoke is
coming from the engine compartment to
avoid injury.
OPENING HOOD
JVP0090X
1. Pu\f\f the h\b\bd \f\bck re\fease hand\fe*1\f\bcated
be\f\bw the instrument pane\f unti\f the h\b\bd springs
up.
2. L\bcate the \fever
*2in between the h\b\bd and
gri\f\fe and push the \fever sideways with y\bur
fingertips.
3. Raise the h\b\bd
*3.
4. Rem\bve the supp\brt r\bd
*4and insert it int\b the
s\f\bt*5.
Hold the coated parts
*Awhen removing or
resetting the support rod. Avoid direct contact
with the metal parts, as they may be hot
immediately after the engine has been stopped.
CLOSING HOOD
1. Whi\fe supp\brting the h\b\bd, return the supp\brt r\bd t\b its \brigina\f p\bsiti\bn.
2. S\f\bw\fy \f\bwer the h\b\bd t\b ab\but 20 t\b 30 cm (8 t\b 12 in) ab\bve the h\b\bd \f\bck, then \fet it dr\bp.
3. Make sure it is secure\fy \fatched.
CAUTION:
Before closing the hood, be sure to release the
support rod and store it in position. Otherwise,
the support rod will be damaged.
HOOD
& R Q G L W L R Q
Page 115 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
WARNING:
Make sure the back door has been closed
securely to prevent it from opening while driving.
Do not drive with the back door open. This could
allow dangerous exhaust gases to be drawn into
the vehicle.
OPENING BACK DOOR
JVP0091X
F\fr m\fd\bl with th\b d\f\fr k\by cylind\br
Th\b back d\f\fr can b\b \fp\bn\bd by pulling th\b \fp\bn\br
handl\b and pulling up th\b back d\f\fr.
T\f cl\fs\b th\b back d\f\fr, pull d\fwn until it s\bcur\bly
l\fcks.
F\fr m\fd\bl with\fut th\b d\f\fr k\by cylind\br
T\f \fp\bn th\b back d\f\fr, unl\fck it with \fn\b \ff th\b
f\fll\fwing \fp\brati\fns, th\bn pull th\b handl\b.
.Push th\b back d\f\fr r\bqu\bst switch (if \bquipp\bd) .
(S\b\b “Int\bllig\bnt K\by syst\bm” (P.3-9) .)
. Push th\b “UNLOCK” butt\fn \fn th\b Int\bllig\bnt K\by
(if \bquipp\bd) . (S\b\b “Int\bllig\bnt K\by syst\bm” (P.3-
9) .) .
Push th\b “UNLOCK” butt\fn \fn th\b r\bm\ft\b
c\fntr\fll\br (if \bquipp\bd) . (S\b\b “R\bm\ft\b k\byl\bss
\bntry syst\bm” (P.3-7) .)
. Push th\b p\fw\br d\f\fr l\fck switch t\f th\b “UN-
LOCK” p\fsiti\fn.
L\fcking with k\by (f\fr m\fd\bl with th\b d\f\fr k\by
cylind\br)
JVP0096X
T\f l\fck th\b back d\f\fr, push it d\fwn firmly, ins\brt th\b
k\by t\f th\b d\f\fr k\by cylind\br and turn th\b k\by cl\fckwis\b
*1. T\f unl\fck th\b back d\f\fr, turn th\b k\by c\funt\br-
cl\fckwis\b*2.
WARNING:
. Fuel is extremely flammable and highly
explosive under certain conditions. You
could be burned or seriously injured if it is
misused or mishandled. Always stop the
engine and do not smoke or allow open
flames or sparks near the vehicle when
refueling.
. Fuel may be under pressure. Turn the cap a
half of a turn, and wait for any “hissing”
sound to stop to prevent fuel from spraying
out and possibly causing personal injury.
Then remove the cap.
. Use only an original equipment type fuel
filler cap as a replacement. It has a built-in
safety valve needed for proper operation of
the fuel system and emission control sys-
tem. An incorrect cap can result in a serious
malfunction and possible injury.
OPENING FUEL FILLER LID
SPA2336
T\f \fp\bn th\b fu\bl fill\br lid, pull th\b fu\bl fill\br lid r\bl\bas\b
handl\b.
Pre-driving checks and adjustments3-19
BACK DOOR
FUEL FILLER LID
& R Q G L W L R Q
Page 188 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
Normal operation ..................\c..................\c..........................\c.............. 5-38
Vehicle \fecurity ..................\c..................\c..........................\c..................\c..... 5-38
Col\b weather \briving ..................\c..................\c..................\c..................... 5-38 Battery ..................\c..................\c..................\c..................\c..................\c..... 5-39
Engine coolant ..................\c..................\c.....................\c..................\c..... 5-39 Tire equipment ..................\c..................\c...............................\c.......... 5-39
Special winter equipment ..................\c..................\c..................\c.... 5-39
Parking brake ..................\c..................\c.....................\c..................\c..... 5-39
Corro\fion protection ..................\c..................\c.....................\c.......... 5-39
& R Q G L W L R Q
Page 189 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
During the first 1,600 km (1,000 miles\f , follow these
recommen\bations to obtain maximum engine perfor-
mance an\b ensure the future reliability an\b economy of
your new vehicle. Failure to follow these recommen\ba-
tions may result in shortene\b engine life an\b re\buce\b
engine performance.
.Do not \brive at a constant spee\b, either fast or
slow, for long perio\bs of time.
. Do not run the engine over 4,000 rpm (HR12 or
HR15 engine\f or 2,500 rpm (K9K engine\f .
. Do not accelerate at full throttle in any gear.
. Do not start quickly.
. Do not brake har\b as much as possible.WARNING:
The driving characteristics of your vehicle will
change remarkably by any additional load and
its distribution, as well as by adding optional
equipment (trailer coupling, roof racks, etc.) .
Your driving style and speed must be adjusted
according to the circumstances. Especially when
carrying heavy loads, your speed must be
reduced adequately.
.Make sure the area aroun\b the vehicle is clear.
. Visually inspect tires for their appearance an\b
con\bition. Measure an\b check the tire pressure for
proper inflation.
. Check that all win\bows an\b lights are clean.
. A\bjust the seat an\b hea\b restraint positions.
. A\bjust the insi\be an\b outsi\be rearview mirror
positions.
. Fasten your seat belt an\b ask all passengers to \bo
the same.
. Check that all \boors are close\b.
. Check the operation of the warning lights when
the ignition switch is turne\b to the “ON” position.
. Maintenance items in the “8. Maintenance an\b \bo-
it-yourself” section shoul\b be checke\b perio\bi-
cally.
WARNING:
.Never leave children or adults who would
normally require the support of others alone
in your vehicle. Pets should not be left alone
either. They could unknowingly activate
switches or controls and inadvertently be-
come involved in a serious accident and
injure themselves. On hot, sunny days,
temperatures in a closed vehicle could
quickly become high enough to cause se-
vere or possibly fatal illness to people or
animals.
. Properly secure all luggage to help prevent it
from sliding or shifting. Do not place lug-
gage higher than the seatbacks. In a sudden
stop or collision, unsecured luggage could
cause personal injury.
EXHAUST GAS (carbon monoxi\be\f
WARNING:
.Do not breathe exhaust gas; it contains
colorless and odorless carbon monoxide.
Carbon monoxide is dangerous. It can cause
unconsciousness or death.
. If you suspect that exhaust fumes are
entering the vehicle, drive with all windows
fully open, and have the vehicle inspected
immediately.
. Do not run the engine in closed spaces such
as a garage.
. Do not park the vehicle with the engine
running for an extended period of time.
Starting and driving5-3
BREAK-IN SCHEDULE
BEFORE STARTING ENGINE PRECAUTIONS WHEN STARTING
AND DRIVING
& R Q G L W L R Q