reset RENAULT PULSE 2012 1.G Owners Manual
[x] Cancel search | Manufacturer: RENAULT, Model Year: 2012, Model line: PULSE, Model: RENAULT PULSE 2012 1.GPages: 352, PDF Size: 6.46 MB
Page 15 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
SIC4425
Type A1. Speedometer (P.2-8\f
2. Trip odometer reset s\bitch/trip computer modes\bitch (P.2-8\f
3. Clock adjusting knob (P.2-38\f
4. Odometer/t\bin trip odometer/trip computer/ clock (P.2-8\f
5. Fuel gauge (P.2-10\f
Illustrated table of contents0-11
METERS AND GAUGES
& R Q G L W L R Q
Page 16 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
0-12Illustrated table of contents
JVC0008X
Type B1. Tachometer \fP.2-10)
2. S\beedometer \fP.2-8)
3. Tri\b odometer reset switch/tri\b com\buter modeswitch \fP.2-8)
4. Clock adjusting knob \fP.2-38)
5. Automatic Transmission \fAT)/Continuously Vari- able Transmission \fCVT) \bosition indicator*
\fP.2-10, P.5-11)/Cruise control and s\beed limit-
er dis\blay* \fP.5-28, P.5-26) 6. Odometer/twin tri\b odometer/tri\b com\buter/
clock \fP.2-8)
7. Fuel gauge \fP.2-10)
*: if equi\b\bed
& R Q G L W L R Q
Page 17 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
JVC0074X
Type C1. Tachometer (\f.2-10)
2. \bpeedometer (\f.2-8)
3. Vehicle information display (\f.2-8, \f.2-20)
4. Trip odometer reset switch (\f.2-8)
5. Automatic Transmission (AT)/Continuously Vari-able Transmission (CVT) position indicator*
(\f.2-10, \f.5-11)
6. Odometer/twin trip odometer/clock (\f.2-8)
*: if equipped
Illustrated table of contents0-13
& R Q G L W L R Q
Page 62 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
2-8Instruments and controls
JVC0074X
Type C1. Tachome\fer
2. Spee\bome\fer
3. Vehicle informa\fion \bisplay
4. Trip o\bome\fer rese\f swi\fch
5. Au\foma\fic \fransmission (A/T)/Con\finuously Vari-able Transmission (CVT) posi\fion in\bica\for*
6. O\bome\fer/\fwin \frip o\bome\fer/clock
*: if equippe\b
SPEEDOMETER AND ODOMETER
Spee\bome\fer
The spee\bome\fer in\bica\fes \fhe vehicle spee\b.
O\bome\fer/Twin \frip o\bome\fer (for Type A an\b
B)
SIC4427Type A and BThe o\bome\fer/\fwin \frip o\bome\fer is \bisplaye\b when
\fhe igni\fion swi\fch is in \fhe “ON” posi\fion.
The o\bome\fer
*1\bisplays \fhe \fo\fal \bis\fance \fhe
vehicle has been \briven.
The \fwin \frip o\bome\fer
*2\bisplays \fhe \bis\fance of
in\bivi\bual \frips.
Changing twin trip odometer display:
Push \fhe rese\f swi\fch
*3\fo change \fhe \bisplay as
follows:
TRIP A ?TRIP B ?Trip compu\fer mo\be ?TRIP A
Resetting twin trip odometer:
Push \fhe rese\f swi\fch
*3for more \fhan 1 secon\b \fo
rese\f \fhe \frip o\bome\fer \fo zero.
For \frip compu\fer informa\fion, see “Trip compu\fer (for
Type A an\b B)” (P.2-9) .
& R Q G L W L R Q
Page 63 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
Odometer/Twin trip odometer (for Type C)
J\fI0002\bType CThe odometer/twin trip odometer is displayed when
the ignition switch is in the “ON” position.
The odometer
*1displays the total distance the
vehicle has been driven. When the odometer displays,
the display of TRIP A and B disappears.
The twin trip odometer
*2displays the distance of
individual trips.
Changing twin trip odometer display:
Push the reset switch
*3to change the display as
follows:
ODO ?TRIP A ?TRIP B ?ODO
Resetting twin trip odometer:
Push the reset switch
*3for more than 1 second to
reset the trip odometer to zero.
For trip computer information, see “Trip computer (for
Type C)” (P.2-25) .
TRIP COMPUTER (for Type A and B)
SIC4441Type A and BThe switch for the trip computer is located on the
meter panel.
When the ignition switch is placed in the “ON”
position, modes of the trip computer can be selected
by pushing the trip computer mode switch
*A.
Each time the trip computer mode switch
*Ais
pushed, the display will change as follows:
ODO ?(TRIP A ?TRIP B) ?Current fuel
consumption ?Average fuel consumption ?Dis-
tance to empty (dte)
Current fuel consumption (l/100 km, km/l or
mpg)
The current fuel consumption mode shows the current
fuel consumption.
Average fuel consumption (l/100 km, km/l or
mpg)
The average fuel consumption mode shows the
average fuel consumption since the last reset. Reset-
ting is done by pushing the trip computer mode switch
*Afor longer than 1 second.
The display is updated every 30 seconds. At about the
first 500 m after a reset, the display shows “----”.
Distance to empty (dte — km or mls)
The distance to empty (dte) mode provides you with an
estimation of the distance that can be driven before
refueling. The dte is constantly being calculated, based
on the amount of fuel in the fuel tank and the actual fuel
consumption.
The display is updated every 30 seconds.
The dte mode includes a low range warning feature:
when the fuel level is low, the dte mode is automatically
selected and the digits blink in order to draw the
driver’s attention. Push the trip computer mode switch
*Ato return to the mode that was selected before the
warning occurred.
When the fuel level drops even lower, the dte display
will change to “----”.
. If the amount of fuel added is small, the
display just before the ignition switch is
turned off may continue to be displayed.
. When driving uphill or rounding curves, the
fuel in the tank shifts, which may momenta-
rily change the display.
Instruments and controls2-9
& R Q G L W L R Q
Page 64 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
2-10Instruments and controls
Resetting displays
When the ave\fage fuel c\bnsumpti\bn \b\f TRIP B is
displayed, push the t\fip c\bmpute\f m\bde switch*Af\b\f
l\bnge\f than 3 sec\bnds. The display \bf ave\fage fuel
c\bnsumpti\bn and t\fip \bd\bmete\f (TRIP B \bnly) will be
\feset at the same time.
TACHOMETER (if equipped)
SIC4428
The tach\bmete\f indicates the engine speed in \fev\blu-
ti\bns pe\f minute (\fpm) .
Do not rev the engine into the red zone.
FUEL GAUGE
SIC4429Type A and B
JVC0024XType CF\b\f Type A and B: The fuel gauge*Aindicates the
app\f\bximate fuel level in the tank when the igniti\bn
switch is in the “ON” p\bsiti\bn.
The gauge may m\bve slightly du\fing b\faking, tu\fning,
accele\fating, \b\f g\bing up and d\bwn hills due t\b
m\bvement \bf fuel in the tank.
The fuel gauge
*Aand the l\bw fuel wa\fning light in
the mete\f (if equipped) blink when the fuel level in the
tank is getting l\bw. Refuel as s\b\bn as it is c\bnvenient,
bef\b\fe the gauge \feads 0.
F\b\f Type C: The fuel gauge
*Bindicates the app\f\bximate fuel level in the tank when the igniti\bn
switch is in the “ON” p\bsiti\bn.
The gauge may m\bve slightly du\fing b\faking, tu\fning,
accele\fating, \b\f g\bing up and d\bwn hills due t\b
m\bvement \bf fuel in the tank.
The l\bw fuel wa\fning light in the mete\f illuminates when
the fuel level in the tank is getting l\bw. Refuel as s\b\bn
as it is c\bnvenient, bef\b\fe the gauge \feads 0.
The a\f\f\bw,
, indicates the fuel fille\f lid is l\bcated \bn
the left side \bf the vehicle.
CAUTION:
Refuel before the gauge reads the empty (0)
position.
AUTOMATIC TRANSMISSION (AT)/CON-
TINUOUSLY VARIABLE TRANSMISSION
(CVT) POSITION INDICATOR (if equipped)
JVC0031XType B and CThe Aut\bmatic T\fansmissi\bn (AT)/C\bntinu\busly Va\fi-
able T\fansmissi\bn (CVT) p\bsiti\bn indicat\b\f*Ain-
dicates the select\b\f leve\f p\bsiti\bn when the igniti\bn
switch is in the “ON” p\bsiti\bn.
& R Q G L W L R Q
Page 78 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
2-24Instruments and controls
INDICATORS FOR MAINTENANCE
JVI0005\f
1. En\bine oil replacement indicator
This indicator appears when the set time comes for
chan\bin\b the en\bine oil. You can set or reset the
distance for chan\bin\b the en\bine oil. (See “Trip
computer (for Type C)” (P.2-25) .)
2. Oil filter replacement indicator
This indicator appears when the set time comes for
replacin\b the oil filter. You can set or reset the distance
for replacin\b the oil filter. (See “Trip computer (for Type
C)” (P.2-25) .)
3. Tire replacement indicator
This indicator appears when the set time comes for
replacin\b tires. You can set or reset the distance for
replacin\b tires. (See “Trip computer (for Type C)” (P.2-
25) .)
4. “OTHER” indicator
This indicator appears when the set time comes for
replacin\b items other than the en\bine oil, oil filter and
tires. You can set or reset the distance for replacin\b the
items. (See “Trip computer (for Type C)” (P.2-25) .)
INDICATORS FOR STOP/START SYSTEM
(if equipped for Europe)
JVI0267\f
1. En\bine stop
If the en\bine stops when the Stop/Start System is
activated, the messa\be is shown.
& R Q G L W L R Q
Page 79 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
2. Auto start deactivation
If the engine sto\fs when the Sto\f/Start S\bstem is
activated, and will not start automaticall\b, the message
is shown.
3. S\bstem fault
If the Sto\f/Start S\bstem is activated, but does not
o\ferate correctl\b, the message is shown. Visit a
RENAULT dealer or qualified worksho\f.
4. Sto\f/Start S\bstem
If the Sto\f/Start S\bstem is deactivated using the Sto\f/
Start S\bstem OFF switch, the message is shown.
If the Sto\f/Start S\bstem is activated using the Sto\f/
Start S\bstem OFF switch, the "STOP/START ON"
message is shown.
TRIP COMPUTER (for T\b\fe C)
JVI0006X
Switches for the tri\f com\futer are located on the left
or right side of the combination meter \fanel. To
o\ferate the tri\f com\futer, \fush the switches as shownabove.
*AENTER switch
*BNEXT switch
When the ignition switch is \fushed to the ON \fosition,
modes of the tri\f com\futer can be selected b\b
\fushing the
switch*A.
Each time the
switch*Ais \fushed, the dis\fla\b
will change as follows:
CO2 saved (if equi\f\fed) ?Current fuel consum\ftion
? Average fuel consum\ftion and s\feed ?Ela\fsed
time and tri\f odometer (if equi\f\fed) ?Distance to
em\ft\b ?Outside air tem\ferature ?Idling sto\f (if
equi\f\fed) ?Setting ?Warning check
CO2 saved (if equi\f\fed)
JVI0268X
The CO2 saved mode shows the estimated quantit\b of
CO2 exhaust emissions \frevented b\b the Sto\f/Start
S\bstem ever\b time the engine is automaticall\b sto\f\fed.
For more information, see “Sto\f/Start S\bstem (CO2
savings ) (if equi\f\fed for Euro\fe)” (P.2-28) .
Current fuel consum\ftion (km/l or l/100 km or
MPG)
JVI0007X
The current fuel consum\ftion mode shows the current
fuel consum\ftion.
Average fuel consum\ftion (km/l or l/100 km
or MPG) and s\feed (km/h or MPH)
JVI0008X
Fuel consumption:
The average fuel consum\ftion mode shows the
average fuel consum\ftion since the last reset. Reset-
ting is done b\b \fushing the
switch*Bfor longer
than 1 second. (The average s\feed is also reset at the
same time.)
Instruments and controls2-25
& R Q G L W L R Q
Page 80 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
2-26Instruments and controls
The display is updated every 30 se\fonds. \bt about the
first 500 m after a reset, the display shows “——”.
Speed:
The average speed mode shows the average vehi\fle
speed sin\fe the last reset. Resetting is done by
pushing the
swit\fh*Bfor longer than 1 se\fond.
(The average fuel \fonsumption is also reset at the
same time.)
The display is updated every 30 se\fonds. The first 30
se\fonds after a reset, the display shows “——”.
Elapsed time and trip odometer (km or
MILES)
JVI0033X
Elapsed time:
The elapsed time mode shows the time sin\fe the last
reset. The displayed time \fan be reset by pushing the
swit\fh*Bfor longer than 1 se\fond. (The trip
odometer is also reset at the same time.)
Trip odometer (if equipped) :
The trip odometer mode shows the distan\fe that the
vehi\fle has been driven sin\fe the last reset. Resetting
is done by pushing the
swit\fh*Bfor longer than
1 se\fond. (The elapsed time is also reset at the same
time.)
Distan\fe to empty (km or MILES)
JVI0010X
The distan\fe to empty (dte) mode provides you with an
estimation of the distan\fe that \fan be driven before
refueling. The dte is \fonstantly being \fal\fulated, based
on the amount of fuel in the fuel tank and the a\ftual fuel
\fonsumption.
The display is updated every 30 se\fonds.
The dte mode in\fludes a low range warning feature. If
the fuel level is low, the warning is displayed on the
s\freen.
When the fuel level drops even lower, the dte display
will \fhange to “——”.
. If the amount of fuel added is small, the
display just before the ignition switch is
pushed to the “OFF”position may continue
to be displayed.
. When driving uphill or rounding curves, the
fuel in the tank shifts, which may momenta-
rily change the display.
Outside air temperature (8C) (if equipped)
JVI0012X
The outside air temperature is displayed in 8C in the
range of í30 to 608C.
The outside air temperature mode in\fludes a low
temperature warning feature. If the outside air tem-
perature is 38 C or below, the warning “ICY” is
displayed on the s\freen.
The outside temperature sensor is lo\fated in front of
the radiator. The sensor may be affe\fted by road or
engine heat, wind dire\ftions and other driving \fondi-
tions. The display may differ from the a\ftual outside
temperature or the temperature displayed on various
signs or billboards.
& R Q G L W L R Q
Page 81 of 352
> ( G L W 0 R G H O . $ 2 ( 0 B 5 H Q D X O W @
Accumulated time and current saved fuel
consumption (ml (mililiter)) \fy Idling \btop
\bystem (if equipped for Thailand)
JVI0011XType A
JVC0021XType BTheswitch*Bis used in the setting mode to
select and decide a menu of Type A and B.
Accumulated time (Type A):
The Accumulated time mode shows the accumulated
time Idling \btop \bystem has \feen operated since the
last reset.
Resetting is done \fy pushing the
switch*Bfor
longer than 1 second. (The saved fuel is also reset at
the same time.) Current saved fuel consumption (Type A):
The Current saved fuel consumption mode shows the
current saved fuel consumption \fy Idling \btop \bystem
has \feen operated since the last reset.
Accumulated time (Type B):
The Accumulated time mode shows the accumulated
time Idling \btop \bystem has \feen operated since the
time the ignition switch was turned ON.
Resetting is done \fy pushing the
switch*Bfor
longer than 1 second. (The saved fuel is also reset at
the same time.)
Current saved fuel consumption (Type B):
The Current saved fuel consumption mode shows the
current saved fuel consumption \fy Idling \btop \bystem
has \feen operated since the time the ignition switch
was turned ON. \bee “Idling \btop \bystem (if equipped
for Thailand)” (P.5-19) .
\betting
JVI0013X
Setting cannot be made while driving. A mes-
sage “Setting can only be operated when
stopped” is also displayed on the vehicle
information display.
The
switch*Aandswitch*Bare used in the setting mode to select and set a menu.
SKIP:
Push the
switch*Ato move to the warning
check mode.
Push the
switch*Bto select other menus.
ALERT:
The alert menu can \fe set to notify the following items.
. TIMER
\belect this su\fmenu to specify when the "time to
rest" indicator activates.
. ICY
\belect this su\fmenu to display the low outside
temperature warning.
To return to the top page of the setting mode, select
“BACK”.
TIME SETTING (CURRENT TIME) :
. CURRENT TIME
Adjust the date and time (hour and minute) of the
clock on the meter.
TIME SETTING (Birthday and Anniversary):
The \firthday and anniversary message reminds you of
the anniversary or a \firthday the driver should
remem\fer.
. BIRTHDAY
\belect this su\fmenu to adjust the date of the
Birthday message.
. ANNIVER\bARY
\belect this su\fmenu to adjust the date of the
Anniversary message.
\belect the display image to set the desired display
image of the Anniversary message.
Instruments and controls2-27
& R Q G L W L R Q